I have been having some issues with the GY-86 module . It uses the MS5611, HMC5883L, and MPU6050 sensors., but I'm using it as an altimeter so I really only need the MS5611. I have it wired up and tried out some code (see below) but there seems to be some problems. Here's the wiring: VCC - 5V GND -…

Trouble with the GY-86 module

jremington November 25, 2020, 12:59am 4

Use the I2C address scanner to check whether I2C communication is working. You may be missing the required pullup resistors on SDA and SCL.

Topic		Replies	Views
Cannot communicate with MS5611 in GY-86 with Due Sensors	5	2228	May 6, 2021
MS5611 Issue ? Programming Questions	4	1307	May 5, 2021
Need help to connect MS5611 Pressure Sensor in I2C mode Sensors	7	8511	May 6, 2021
Another vario project - Arduino R3 UNO & MS5611 sensor (GY-63) Sensors	2	4423	May 6, 2021
MS5611 and ATTiny85 reading pressure and altitude Sensors	5	876	May 6, 2021