Go Down

Topic: ATtiny4313 with USBtinyISP (Read 1 time) previous topic - next topic

qtechknow

Hi all,
Yesterday, my friend gave me 5 ATtiny4313's.  I downloaded CrossPack for AVR Development (i'm using a mac), and opened the terminal.  I started with an initialization, and got the 4313 to respond well.  I'm using USBtinyISP, by the way.  I used the command line, avrdude -c usbtiny -p t4313  I wondered what the fuses should be.  I'm planning on using a .hex file compiled by Arduino to upload to the 4313.  Any help with the fuses?

Coding Badly


These are the Arduino Tiny fuse settings for the 4313...
http://code.google.com/p/arduino-tiny/source/browse/trunk/hardware/tiny/boards.txt#373
http://code.google.com/p/arduino-tiny/source/browse/trunk/hardware/tiny/boards.txt#405

This is the fuse calculator I usually use...
http://www.engbedded.com/fusecalc

qtechknow

Thanks for the reply.  I will use the files.

Go Up