It looks like it is working now i had uncommented the wrong display in the config file D'ho!! here is the output from it
Serial initialized
Reported Arduino Revision: 1.0.5
F_CPU: 16000000
Lib Configuration: openGLCD ver: 0.8a-27 build: v0.8a-27-g62cf169
Panel Configuration:ks0108-HJ19264A
Pin Configuration:ks0108-Uno
GLCD:ks0108 DisplayWidth:192 DisplayHeight:64
Chips:3 ChipWidth:64 ChipHeight:64
CSEL1:A0(PIN_C0) CSEL2:A1(PIN_C1) CSEL3:3(PIN_D3)
RW:A2(PIN_C2) DI:A3(PIN_C3) EN:A4(PIN_C4)
D0:8(PIN_B0) D1:9(PIN_B1) D2:10(PIN_B2) D3:11(PIN_B3)
D4:4(PIN_D4) D5:5(PIN_D5) D6:6(PIN_D6) D7:7(PIN_D7)
Delays: tDDR:320 tAS:140 tDSW:200 tWH:450 tWL:450
ChipSelects: CHIP0:(A0,0x0, A1,0x1, 3,0x1) CHIP1:(A0,0x1, A1,0x0, 3,0x1) CHIP2:( A0,0x1, A1,0x1, 3,0x0)
Data mode:
d0-d3:nibble mode-Non-Atomic
d4-d7:nibble mode-Non-Atomic
Backlight:
Diag Loop: 1
Initializing openGLCD
Displaying Library version Screen
Turning display & backlight on/off
Displaying ChipSelect Screens
Walking 1s data test
Wr/Rd Chip Select Test
Testing GLCD memory pages
Horizontal Page Test Chip: 0 Pixels 0-63
Vertical Page Test Chip: 0 Pixels 0-63
Horizontal Page Test Chip: 1 Pixels 64-127
Vertical Page Test Chip: 1 Pixels 64-127
Horizontal Page Test Chip: 2 Pixels 128-191
Vertical Page Test Chip: 2 Pixels 128-191
Full Module Horizontal Page Test:Pixels 0-191
Full Module Vertical Page Test:Pixels 0-191
Tests PASSED
GLCD.SetDot() speed (K ops/sec): 16.23