12V Led Strip Control with Arduino

Hey

I want to make a Smart Home Project with an ESP-Module, And besides all that i have to find a way to control and dim some 12V Warm White LED Stripes with it, wich means control them by PWM.

What is the most comfortable way to do that? I Have a 12- and 5V Power Supply.

Thanks

You can use a [u]MOSFET driver[/u]. (You can leave-out the diode since you have a non-inductive load.)

ESP8266 means 3.3volt logic.
Can't just use any logic level mosfet for that
How long is your LED strip, how many LEDs per meter, and what type of LEDs (post a link)
Leo..

ESP8266 means 3.3volt logic.
Can't just use any logic level mosfet for that
How long is your LED strip, how many LEDs per meter, and what type of LEDs (post a link)
Leo..

I have an ESP32, not an 8266. And my LED Stripe will be something simple like that: https://www.ebay.com/itm/Warm-White-5M-300leds-3528-SMD-LED-Strip-Lights-Indoor-DIY-Lamp-DC-12V/223106945295?_trkparms=aid%3D111001%26algo%3DREC.SEED%26ao%3D1%26asc%3D20160908105057%26meid%3D8d97939b3314491e8b90391604a4fa39%26pid%3D100675%26rk%3D3%26rkt%3D15%26sd%3D123318492776%26itm%3D223106945295&_trksid=p2481888.c100675.m4236&_trkparms=pageci%3Acbe19238-a37c-11e8-9def-74dbd18094fc|parentrq%3A50f733cb1650ad417235bde2fff8315e|iid%3A1

(I Want to dim them)

You can use a MOSFET driver. (You can leave-out the diode since you have a non-inductive load.)

Can i also set the brightness with this setup you mentioned?

https://www.ebay.com/itm/Warm-White-5M-300leds-3528-SMD-LED-Strip-Lights-Indoor-DIY-Lamp-DC-12V/223106945295?_trkparms=aid%3D111001%26algo%3DREC.SEED%26ao%3D1%26asc%3D20160908105057%26meid%3D8d97939b3314491e8b90391604a4fa39%26pid%3D100675%26rk%3D3%26rkt%3D15%26sd%3D123318492776%26itm%3D223106945295&_trksid=p2481888.c100675.m4236&_trkparms=pageci%3Acbe19238-a37c-11e8-9def-74dbd18094fc|parentrq%3A50f733cb1650ad417235bde2fff8315e|iid%3A1