2.7" OLED Nano 33 IOT

Hello all,

Please could someone help me with connecting a 2.7" OLED to an Arduino Nano 33 IOT.

I am new to programming so please be gentle!

Datasheet mentions…

128x64 pixels
Built in SSD1322 controller

I believe this to be the connection to the Nano…

Pin #4 (DC) to digital #8
Connect Pin #7 (SCLK) to digital #13
Connect Pin #8 (DIN) to digital #11
Connect Pin #15 (CS) to digital #10
Connect Pin #16 (RST) to digital #9

I don’t know what libraries or code to use or where to begin?

I2C does not seem to work with SSD1306.
So SPI seems like the only way?

Many thanks!

NHD-2.7-12864WDW3-1129822.pdf (872 KB)

Have a look at this, but beware the 33uses a different processor so it might not work . I got this from googling , you might do better? Libraries usually have examples too, to get you started :

https://forum.arduino.cc/index.php?topic=544081.0

Thanks Hammy!