Thanks for the photo. It has 5 Resistor packs RP1-RP5. This would normally mean an 8080-8 interface instead of the regular 7 Resistor Pack 8080-16 interface.
However, the microSD seems to connect to D50-D53 without going through a Resistor Pack.
And the XPT2046 does not use Resistor Packs either.
So your TFT might be 8080-8 or 8080-16. You can verify which Resistor Packs connect to D22-D37 with a multimeter. If D30-D37 are not connected, this will rule out the 16-bit interface.
2.8 inch suggests that it is a 240x320 controller.
UTFT supports several 240x320 controllers. Some with 8080-8 and some with 8080-16 interface.
Your Screen is write-only. It is not possible to read the controller ID. You just need to use guesswork.
MCUFRIEND_kbv can control many 240x320 controllers as USE_SPECIAL with USE_MEGA_8BIT_SHIELD / USE_MEGA_16BIT_SHIELD
A link to the Ebay / AliExpress sale item might give some more clues.
David.