3.2 inch display how to setup

Using Arduino Project Guidance
1

Hello, i'm pretty new to Arduino.
I've bought an 3.2 inch TFT LCD Module with touchscreen and SD card but i can't wire it up correctly.
I can't find any C/D or SCK pin. Do i really need a shield for it or i can just plug it and upload a sketch and it works.

The lcd has a SSD1289 controller. And the touchscreen has the ADS7843 controller.

I've uploaded 2 images with the back and from of the module. ( 1 and 2 )

If you need something else please do tell and i will reply.

Thank you very much in advance.

2

I typed a reply then realised I was talking out of my arse. SCK=CLK on the board, but looking at the pinout I think the SPI is just for the touch interface and the SD card. the display looks likely to be the pins on the left side of the connector.

a quick google for ssd1289 on here threw up some interesting threads, could be worth a look.