4WD with XY-joystick and L293D issue

[naneki]

4WD with XY-joystick and L293D issue

Hi, Great.. Try this code, it will test your joystick, check the IDE monitor for the values as you move the joystick. #include <AFMotor.h> //initial motors pin AF_DCMotor motor1(1); AF_DCMotor motor2(2); AF_DCMotor motor3(3); AF_DCMotor motor4(4); int JoystickXPin = A0; int JoystickYPin = A1; int xAxis; int yAxis; char command; void setup() { Serial.begin(9600); Serial.println("Joystick Test Code"); } void loop() { xAxis = analogRead(JoystickXPin); // Read Joysticks X-axis xAxis = a…

Keeps saying = 0 whatever i do. Tried with joystick on single arduino uno R3 board.