tommyjay:
Just to be safe and sure, this is the adjusted wiring between the IC and the LED pins, rewiring them fro the AS to the BS pinout on the LED matrix? (and thank you again so much for doing this!)
Yes.
You are re-mapping.
You can see what is happening if you take a printout of the BS "schematic" (what you have) and rotate it to 90 degrees to match up with the AS "schematic".
However, if you are going to use the Parola library, then you don't need to do the re-mapping.
The Parola library expects the BS part.
Other examples use the AS part such as Arduino Playground - HomePage.
That's when the re-mapping is needed.
.