doc_norway:
BhEaN:
I read the doc (obviously) before my post, and the controller of my display (SSD1963) is in the list of supported controllers of the UTFT library... so please, the next time, read YOU the list before post this kind of replies...If you read the documentataion like you say you would have found that the controller is supported but no 7" display modules are supported.
You are getting an image on the display so the controller part is obviously working, but the image is not what you expected because your particular display module is NOT supported.
Therefore the problem is not with the library.I have put a lot of time and effort into my libraries and do not like it when people like you make unfounded accusations that there are problems with them. All the display modules on the supported-list work just fine. Because there are differences between modules I need to have one of the module in question to add support for it.
Well... I think this was not a good start...
My english is not very good, so maybe you are right, but when I read your post, I didn't like the response...
In any case, I apologies for my answer...
I use the UTFT library a lot of times, and always works great... but in this case, I was searching a "big" TFT to use in my Arduino project, and when I found this display, and I saw the controller was compatible with the library, I was very dissapointed because the image shows fine, but mirrored...
This is the reason because I was thinking in a library problem... but ok, you are right... is not a library problem. It was just a comment, and I didn't want make unfounded accusations. Your library is very usefull for me, and I'm very grateful with that.
Regards,