# 74HC595 can't drive relay with load

**URL:** <https://forum.arduino.cc/t/74hc595-cant-drive-relay-with-load/1277876>\
**Category:** General Guidance\
**Created:** [July 3, 2024, 9:43am UTC](https://forum.arduino.cc/t/74hc595-cant-drive-relay-with-load/1277876 "2024-07-03T09:43:07Z")\
**Posts on this page:** 1\
**Showing post:** 4

<div class="post-metadata">

**Author:** ![murugesh\_rcpilot](https://avatars.discourse-cdn.com/v4/letter/m/ecd19e/32.png) [@murugesh\_rcpilot](https://forum.arduino.cc/u/murugesh_rcpilot)\
**Post date:** [July 3, 2024, 10:23am UTC](https://forum.arduino.cc/t/74hc595-cant-drive-relay-with-load/1277876/4 "2024-07-03T10:23:11Z")

</div>

Yeah I completely understand the importance of capacitors and isolation with the below discussion but my problem is unique.

> [@Shift register with relays](https://forum.arduino.cc/t/shift-register-with-relays/891678):
>
> Hi, i finished my project of automatic staircase with 4 sonic sensors. To control 16 leds with 2 shift register outputs. Project works perfect with using leds as outputs. Today I tried to replace leds with the relay module.. But it's not working. I know module gets triggered when LOW so even I did change that in code..still relays isn't working.. I mean it's not getting triggered.and same time if I try with led it works. This is the module I'm trying to use And this is the schematic

---

_[View the full topic](https://forum.arduino.cc/t/74hc595-cant-drive-relay-with-load/1277876)._
