Hello, This is the first time I have used the forum. I am an Arduino novice. I was successfully able to create/patch together a sketch that I used with an ESP32 and a reed switch to alert me, via Blynk, if the safe had opened. Since I am using a battery, I also want to introduce a deep sleep compo…

Welcome to the Forum. Did you read these posts?: General Guidance and How to use the Forum and Read this before posting a programming question ...

I did. I am unsure of what I did incorrectly other than not being sure if "posting" code is the same as attaching it. Is that what is missing? Thanks in advance Steve

It's in "6. Getting help on the forum"... "When you post your code put it between code... tags. You can do that by hitting the </> button above the posting area." I have to admit, it's not as obvious as I thought it was...

Thanks for the heads up. Here is my attempt at combining the 2 codes (again - trying to combine a simple reed switch activation/blynk notification with a hibernation sketch): The issue: the hibernation and wakeup from pin 13 reed switch works, but the blynk notification does not. #define BLYNK_PR…

A simple reed switch sketch w/a deep sleep prgram to notify me of sticky fingers

Projects Programming

Topic		Replies	Views
Esp32-c3 super mini deepsleep doorsensor Programming	34	1085	December 6, 2025
Implementation of deep sleep for Seeed Studio ESP32-c3 running MQTT client General Guidance	9	95	March 27, 2026
ESP32C3 ne sort pas de veille profonde Français	5	88	January 18, 2026
Deepsleep with door contact sensor General Guidance	39	159	March 26, 2026
ESP32-C3 Deep Sleep Weird Power Draw use-cases General Guidance	15	289	January 31, 2026

A simple reed switch sketch w/a deep sleep prgram to notify me of sticky fingers

Related topics