Hello, I use libery AccelStepper version 1.6.1 to control 2 stepper motors. I created the software with the Arduino IDE 1.8.15. Everything works fine. But when I flash the processor with the Arduino IDE 2.3.1, the stepper motors don't turn, regardless of whether I use Accelstepper 1.6.1 or the curre…

AccelStepper problems with Arduino IDE 2.3.1

HoleHand February 19, 2024, 4:30pm 4

The sketch I am using is running well since 2 years, only with the new IDE I have the issue.

1 Like