Hi all! I wasn't exactly sure what the proper board would be for this "problem". Long story short, I'm using my Arduino Mega 2560 to control several motors for a robot. The motors run off of 12VDC and I'm using an H-Bridge IC ( http://www.ti.com/lit/ds/symlink/sn754410.pdf ) to control the motors. I…

Accidentally applied 12VDC input to the 5VDC output pin...

Grumpy_Mike December 1, 2012, 9:43am 6

went to go where chips go to die

That will be silicon heaven then.