adafruit 32u4 breakout

Using Arduino Microcontrollers
#1

Has anyone got any experience with the adafruit 32u4 breakout? I have mine running the leonardo bootloaded and sketches seem to upload ok.

The problem I get is that Serial.print does not send anything over the usb serial I have tried Serial1.print also but I assume this is for the uart port and not the serial over usb.

Any idea’s? I am assuming of course that I can serial debug with the 32u4 over the usb port?

Thanks

#2

Yes, it will output serial to the Serial Monitor.
You need to change your baud rate to 1200

Serial.begin(1200);
#3

Ok, thanks.

#4

Why so slow on the serial?

#5

You will need to install the driver and figure out what the port is.

The baudrate is irrelevant on the USB CDC.

#6

The baudrate is irrelevant on the USB CDC.

Which is one of the things I love about Arduino boards based on that processor (like the Teensy). 12 Mps "Serlal". 8)

#7

[quote author=Coding Badly link=topic=87459.msg657370#msg657370 date=1326838620]

Which is one of the things I love about Arduino boards based on that processor (like the Teensy). 12 Mps "Serlal". 8) [/quote]

Me too, the processor is great! I now use the vinciDuino all the time.

#8

fm: [quote author=Coding Badly link=topic=87459.msg657370#msg657370 date=1326838620]

Which is one of the things I love about Arduino boards based on that processor (like the Teensy). 12 Mps "Serlal". 8)

Me too, the processor is great! I now use the vinciDuino all the time. [/quote]

Yes that's nice but the java terminal from the IDE can not realy catch them, its feels like the terminal stagnate sometimes to get air. I'm using putty now for the serial on my vinciduino.

#9

Markus_L811:
Yes that’s nice but the java terminal from the IDE can not realy catch them, its feels like the terminal stagnate sometimes to get air. I’m using putty now for the serial on my vinciduino.

It’s great to hear that you like the board and its speed Markus_L811! I use coolterm on a Mac or screen and it flies!

#10