Adding Arduino r4 wifi to Firmata board.h file

Official Hardware UNO Family UNO R4 WiFi
12

Thank you for the quick response.

Sadly more errors:

In file included from /Users/jules/Library/Arduino15/packages/arduino/hardware/renesas_uno/1.2.0/cores/arduino/Arduino.h:124:0,
                 from /Users/jules/Documents/Arduino/libraries/ConfigurableFirmata/src/utility/Boards.h:23,
                 from /Users/jules/Documents/Arduino/libraries/ConfigurableFirmata/src/ConfigurableFirmata.h:18,
                 from /Users/jules/Documents/Arduino/libraries/ConfigurableFirmata/src/AnalogOutputFirmata.cpp:19:
/Users/jules/Documents/Arduino/libraries/ConfigurableFirmata/src/AnalogOutputFirmata.cpp: In member function 'virtual boolean AnalogOutputFirmata::handlePinMode(byte, int)':
/Users/jules/Library/Arduino15/packages/arduino/hardware/renesas_uno/1.2.0/variants/UNOWIFIR4/pins_arduino.h:93:30: error: 'IS_PIN_PWM' was not declared in this scope
 #define digitalPinHasPWM(p) (IS_PIN_PWM(getPinCfgs(p, PIN_CFG_REQ_PWM)[0]))
                              ^
/Users/jules/Documents/Arduino/libraries/ConfigurableFirmata/src/utility/Boards.h:817:33: note: in expansion of macro 'digitalPinHasPWM'
 #define IS_PIN_PWM(p)           digitalPinHasPWM(p)
                                 ^~~~~~~~~~~~~~~~
/Users/jules/Documents/Arduino/libraries/ConfigurableFirmata/src/AnalogOutputFirmata.cpp:41:33: note: in expansion of macro 'IS_PIN_PWM'
     if (mode == PIN_MODE_PWM && IS_PIN_PWM(pin)) {
                                 ^~~~~~~~~~
/Users/jules/Documents/Arduino/libraries/ConfigurableFirmata/src/AnalogOutputFirmata.cpp: In member function 'virtual void AnalogOutputFirmata::handleCapability(byte)':
/Users/jules/Library/Arduino15/packages/arduino/hardware/renesas_uno/1.2.0/variants/UNOWIFIR4/pins_arduino.h:93:30: error: 'IS_PIN_PWM' was not declared in this scope
 #define digitalPinHasPWM(p) (IS_PIN_PWM(getPinCfgs(p, PIN_CFG_REQ_PWM)[0]))
                              ^
/Users/jules/Documents/Arduino/libraries/ConfigurableFirmata/src/utility/Boards.h:817:33: note: in expansion of macro 'digitalPinHasPWM'
 #define IS_PIN_PWM(p)           digitalPinHasPWM(p)
                                 ^~~~~~~~~~~~~~~~
/Users/jules/Documents/Arduino/libraries/ConfigurableFirmata/src/AnalogOutputFirmata.cpp:50:7: note: in expansion of macro 'IS_PIN_PWM'
   if (IS_PIN_PWM(pin)) {
       ^~~~~~~~~~

exit status 1

Compilation error: exit status 1

In the following Github Arduino Issue it seems that there was indication of compilation issues. Not sure if that is also relevant to this.