# Adding debug support to a non-ARM EABI board type

**URL:** <https://forum.arduino.cc/t/adding-debug-support-to-a-non-arm-eabi-board-type/1138076>\
**Category:** IDE 2.x\
**Created:** [June 14, 2023, 8:04pm UTC](https://forum.arduino.cc/t/adding-debug-support-to-a-non-arm-eabi-board-type/1138076 "2023-06-14T20:04:03Z")\
**Posts on this page:** 1\
**Showing post:** 5

<div class="post-metadata">

**Author:** ![ptillisch](https://avatars.discourse-cdn.com/v4/letter/p/ad7895/32.png) [@ptillisch](https://forum.arduino.cc/u/ptillisch)\
**Post date:** [June 15, 2023, 4:08pm UTC](https://forum.arduino.cc/t/adding-debug-support-to-a-non-arm-eabi-board-type/1138076/5 "2023-06-15T16:08:24Z")

</div>

> [@KurtE](#):
>
> We are making some progress (actually @Merlin513 )

Thanks for the update. If you end up still running into that problem with the `debug.toolchain.prefix` property, please let me know and I'll investigate.

> [@KurtE](#):
>
> Was wondering if some of the other debuggers will work with it

I'm using this nice little open source CMSIS-DAP compliant debug probe:

> **[CMSIS-DAP Compliant SWD Debugger by Alex Taradov on Tindie](https://www.tindie.com/products/ataradov/cmsis-dap-compliant-swd-debugger/)**
>
> CMSIS-DAP compliant debugger based on a free and open hardware and software

It works perfectly with the SAMD boards and the Arduino IDE 2.x integrated sketch debugger.

The creator [Alex Taradov](https://github.com/ataradov) also suggests a DIY debug probe based on a RPi Pico board in the description of that product listing. I haven't found the time to try that out yet, but I would guess it would work fine with the sketch debugger.

You should be able to use any CMSIS-DAP compliant debug probe. I know some of the Arduino Tooling Team members have personally verified that the Atmel-ICE debugger can be used. That one is more spendy than the Alex Taradov debug probe or the J-Link EDU Mini, but at least is more affordable than the professional J-Link probes and you might happen to have access to one already.

The Segger J-Link EDU Mini will also work fine, but you should be aware that the J-Link debug probes aren't "plug and play" like the CMSIS-DAP compliant debug probes. You will need to install the required tools manually and add a configuration file to the sketches you want to debug. You can learn about that from this tutorial:

[https://docs.arduino.cc/tutorials/mkr-wifi-1010/mkr-jlink-setup](https://docs.arduino.cc/tutorials/mkr-wifi-1010/mkr-jlink-setup)

---

_[View the full topic](https://forum.arduino.cc/t/adding-debug-support-to-a-non-arm-eabi-board-type/1138076)._
