Aduino Nano Fehler beim compilieren

my_xy_projekt · December 22, 2023, 5:50pm

Sag mal, Du hast nicht schon mal vor 4 Wochen die Thematic mit der Geschwindigkeitsmessung auf Basis des Codes gehabt?

Die Fehlermeldung sieht mir doch sehr danach aus, als wenn Du zwei Sketche versucht hast zu mischen.

wwerner · December 22, 2023, 6:18pm

fony · December 22, 2023, 6:20pm

Das ist nicht der Beitrag was ich meine

martinamandel · December 22, 2023, 11:20pm

Hallo, genau so, gemacht, leider funktioniert die Programmierung nur spontan.

Das Display zeigt keine Funktion.

MfG

Rainer

martinamandel · December 22, 2023, 11:22pm

Leider nein, ich kenne dich nicht und so sollte es bleiben be iden Komentaren.

my_xy_projekt · December 23, 2023, 1:30pm

Ich kenn Dich auch nicht. Und ich denke mal der Rest der Helfenden ebenso.
Von mir aus kann das auch gerne so bleiben.
Aber ich suche mir aus, auf welche Beiträge ich kommentiere und Du wirst schon selbst entscheiden müssen, ob Du meine Hilfe annimmst oder nicht.

Die entsprechenden Funktionen bietet Dir das Medium, welches Du benutzt.
Das Du diese nicht beherrscht, hast Du gezeigt.

fony · December 23, 2023, 2:59pm

Was nun, funktioniert auf ein mall das hochladen, nur irgend welscher Display tut nicht?
Das kommt wen man für jedes Problem neuen Beitrag öffnet.

paulpaulson · December 23, 2023, 3:15pm

Meine Glaskugel befindet sich in der Spülmaschine.

Pack mal Butter bei de Fische.

Poste deinen letzten Sketch und Schaltplan.

martinamandel · December 23, 2023, 3:29pm

Hallo, danke für die Tipps, es ist COM8,9600,8,N,1 im Serialmonitor erscheint ready.
Nun habe ich noch beim compilieren ein Problem mit Adafruit_SH1106 und komme nicht weiter.
Arduino: 1.8.19 (Windows 10), Board: "Arduino Nano, ATmega328P (Old Bootloader)"

C:\Program Files (x86)\Arduino\arduino-builder -dump-prefs -logger=machine -hardware C:\Program Files (x86)\Arduino\hardware -hardware C:\Users\marti\AppData\Local\Arduino15\packages -tools C:\Program Files (x86)\Arduino\tools-builder -tools C:\Program Files (x86)\Arduino\hardware\tools\avr -tools C:\Users\marti\AppData\Local\Arduino15\packages -built-in-libraries C:\Program Files (x86)\Arduino\libraries -libraries C:\Users\marti\OneDrive\Dokumente\Arduino\libraries -fqbn=arduino:avr:nano:cpu=atmega328old -vid-pid=1A86_7523 -ide-version=10819 -build-path C:\Users\marti\AppData\Local\Temp\arduino_build_544490 -warnings=default -build-cache C:\Users\marti\AppData\Local\Temp\arduino_cache_788025 -prefs=build.warn_data_percentage=75 -prefs=runtime.tools.avr-gcc.path=C:\Users\marti\AppData\Local\Arduino15\packages\arduino\tools\avr-gcc\7.3.0-atmel3.6.1-arduino7 -prefs=runtime.tools.avr-gcc-7.3.0-atmel3.6.1-arduino7.path=C:\Users\marti\AppData\Local\Arduino15\packages\arduino\tools\avr-gcc\7.3.0-atmel3.6.1-arduino7 -prefs=runtime.tools.arduinoOTA.path=C:\Users\marti\AppData\Local\Arduino15\packages\arduino\tools\arduinoOTA\1.3.0 -prefs=runtime.tools.arduinoOTA-1.3.0.path=C:\Users\marti\AppData\Local\Arduino15\packages\arduino\tools\arduinoOTA\1.3.0 -prefs=runtime.tools.avrdude.path=C:\Users\marti\AppData\Local\Arduino15\packages\arduino\tools\avrdude\6.3.0-arduino17 -prefs=runtime.tools.avrdude-6.3.0-arduino17.path=C:\Users\marti\AppData\Local\Arduino15\packages\arduino\tools\avrdude\6.3.0-arduino17 -verbose D:\Digikeijs\N-Modellbahn_MoBa-Speed_for_Arduino_V1-1_to_V1-4\N-Modellbahn_MoBa-Speed_for_Arduino_V1-4_by-Bernhard_OLED_1-3\N-Modellbahn_MoBa-Speed_for_Arduino_V1-4_by-Bernhard_OLED_1-3.ino

C:\Program Files (x86)\Arduino\arduino-builder -compile -logger=machine -hardware C:\Program Files (x86)\Arduino\hardware -hardware C:\Users\marti\AppData\Local\Arduino15\packages -tools C:\Program Files (x86)\Arduino\tools-builder -tools C:\Program Files (x86)\Arduino\hardware\tools\avr -tools C:\Users\marti\AppData\Local\Arduino15\packages -built-in-libraries C:\Program Files (x86)\Arduino\libraries -libraries C:\Users\marti\OneDrive\Dokumente\Arduino\libraries -fqbn=arduino:avr:nano:cpu=atmega328old -vid-pid=1A86_7523 -ide-version=10819 -build-path C:\Users\marti\AppData\Local\Temp\arduino_build_544490 -warnings=default -build-cache C:\Users\marti\AppData\Local\Temp\arduino_cache_788025 -prefs=build.warn_data_percentage=75 -prefs=runtime.tools.avr-gcc.path=C:\Users\marti\AppData\Local\Arduino15\packages\arduino\tools\avr-gcc\7.3.0-atmel3.6.1-arduino7 -prefs=runtime.tools.avr-gcc-7.3.0-atmel3.6.1-arduino7.path=C:\Users\marti\AppData\Local\Arduino15\packages\arduino\tools\avr-gcc\7.3.0-atmel3.6.1-arduino7 -prefs=runtime.tools.arduinoOTA.path=C:\Users\marti\AppData\Local\Arduino15\packages\arduino\tools\arduinoOTA\1.3.0 -prefs=runtime.tools.arduinoOTA-1.3.0.path=C:\Users\marti\AppData\Local\Arduino15\packages\arduino\tools\arduinoOTA\1.3.0 -prefs=runtime.tools.avrdude.path=C:\Users\marti\AppData\Local\Arduino15\packages\arduino\tools\avrdude\6.3.0-arduino17 -prefs=runtime.tools.avrdude-6.3.0-arduino17.path=C:\Users\marti\AppData\Local\Arduino15\packages\arduino\tools\avrdude\6.3.0-arduino17 -verbose D:\Digikeijs\N-Modellbahn_MoBa-Speed_for_Arduino_V1-1_to_V1-4\N-Modellbahn_MoBa-Speed_for_Arduino_V1-4_by-Bernhard_OLED_1-3\N-Modellbahn_MoBa-Speed_for_Arduino_V1-4_by-Bernhard_OLED_1-3.ino

Using board 'nano' from platform in folder: C:\Users\marti\AppData\Local\Arduino15\packages\arduino\hardware\avr\1.8.6

Using core 'arduino' from platform in folder: C:\Users\marti\AppData\Local\Arduino15\packages\arduino\hardware\avr\1.8.6

Detecting libraries used...

"C:\Users\marti\AppData\Local\Arduino15\packages\arduino\tools\avr-gcc\7.3.0-atmel3.6.1-arduino7/bin/avr-g++" -c -g -Os -w -std=gnu++11 -fpermissive -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics -Wno-error=narrowing -flto -w -x c++ -E -CC -mmcu=atmega328p -DF_CPU=16000000L -DARDUINO=10819 -DARDUINO_AVR_NANO -DARDUINO_ARCH_AVR "-IC:\Users\marti\AppData\Local\Arduino15\packages\arduino\hardware\avr\1.8.6\cores\arduino" "-IC:\Users\marti\AppData\Local\Arduino15\packages\arduino\hardware\avr\1.8.6\variants\eightanaloginputs" "C:\Users\marti\AppData\Local\Temp\arduino_build_544490\sketch\N-Modellbahn_MoBa-Speed_for_Arduino_V1-4_by-Bernhard_OLED_1-3.ino.cpp" -o nul

Alternatives for SPI.h: [SPI@1.0]

ResolveLibrary(SPI.h)

-> candidates: [SPI@1.0]

"C:\Users\marti\AppData\Local\Arduino15\packages\arduino\tools\avr-gcc\7.3.0-atmel3.6.1-arduino7/bin/avr-g++" -c -g -Os -w -std=gnu++11 -fpermissive -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics -Wno-error=narrowing -flto -w -x c++ -E -CC -mmcu=atmega328p -DF_CPU=16000000L -DARDUINO=10819 -DARDUINO_AVR_NANO -DARDUINO_ARCH_AVR "-IC:\Users\marti\AppData\Local\Arduino15\packages\arduino\hardware\avr\1.8.6\cores\arduino" "-IC:\Users\marti\AppData\Local\Arduino15\packages\arduino\hardware\avr\1.8.6\variants\eightanaloginputs" "-IC:\Users\marti\AppData\Local\Arduino15\packages\arduino\hardware\avr\1.8.6\libraries\SPI\src" "C:\Users\marti\AppData\Local\Temp\arduino_build_544490\sketch\N-Modellbahn_MoBa-Speed_for_Arduino_V1-4_by-Bernhard_OLED_1-3.ino.cpp" -o nul

Alternatives for Wire.h: [Wire@1.0]

ResolveLibrary(Wire.h)

-> candidates: [Wire@1.0]

"C:\Users\marti\AppData\Local\Arduino15\packages\arduino\tools\avr-gcc\7.3.0-atmel3.6.1-arduino7/bin/avr-g++" -c -g -Os -w -std=gnu++11 -fpermissive -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics -Wno-error=narrowing -flto -w -x c++ -E -CC -mmcu=atmega328p -DF_CPU=16000000L -DARDUINO=10819 -DARDUINO_AVR_NANO -DARDUINO_ARCH_AVR "-IC:\Users\marti\AppData\Local\Arduino15\packages\arduino\hardware\avr\1.8.6\cores\arduino" "-IC:\Users\marti\AppData\Local\Arduino15\packages\arduino\hardware\avr\1.8.6\variants\eightanaloginputs" "-IC:\Users\marti\AppData\Local\Arduino15\packages\arduino\hardware\avr\1.8.6\libraries\SPI\src" "-IC:\Users\marti\AppData\Local\Arduino15\packages\arduino\hardware\avr\1.8.6\libraries\Wire\src" "C:\Users\marti\AppData\Local\Temp\arduino_build_544490\sketch\N-Modellbahn_MoBa-Speed_for_Arduino_V1-4_by-Bernhard_OLED_1-3.ino.cpp" -o nul

Alternatives for Adafruit_GFX.h: [Adafruit_GFX_Library@1.11.9]

ResolveLibrary(Adafruit_GFX.h)

-> candidates: [Adafruit_GFX_Library@1.11.9]

"C:\Users\marti\AppData\Local\Arduino15\packages\arduino\tools\avr-gcc\7.3.0-atmel3.6.1-arduino7/bin/avr-g++" -c -g -Os -w -std=gnu++11 -fpermissive -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics -Wno-error=narrowing -flto -w -x c++ -E -CC -mmcu=atmega328p -DF_CPU=16000000L -DARDUINO=10819 -DARDUINO_AVR_NANO -DARDUINO_ARCH_AVR "-IC:\Users\marti\AppData\Local\Arduino15\packages\arduino\hardware\avr\1.8.6\cores\arduino" "-IC:\Users\marti\AppData\Local\Arduino15\packages\arduino\hardware\avr\1.8.6\variants\eightanaloginputs" "-IC:\Users\marti\AppData\Local\Arduino15\packages\arduino\hardware\avr\1.8.6\libraries\SPI\src" "-IC:\Users\marti\AppData\Local\Arduino15\packages\arduino\hardware\avr\1.8.6\libraries\Wire\src" "-IC:\Users\marti\OneDrive\Dokumente\Arduino\libraries\Adafruit_GFX_Library" "C:\Users\marti\AppData\Local\Temp\arduino_build_544490\sketch\N-Modellbahn_MoBa-Speed_for_Arduino_V1-4_by-Bernhard_OLED_1-3.ino.cpp" -o nul

Alternatives for Adafruit_I2CDevice.h: [Adafruit_BusIO@1.14.5]

ResolveLibrary(Adafruit_I2CDevice.h)

-> candidates: [Adafruit_BusIO@1.14.5]

"C:\Users\marti\AppData\Local\Arduino15\packages\arduino\tools\avr-gcc\7.3.0-atmel3.6.1-arduino7/bin/avr-g++" -c -g -Os -w -std=gnu++11 -fpermissive -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics -Wno-error=narrowing -flto -w -x c++ -E -CC -mmcu=atmega328p -DF_CPU=16000000L -DARDUINO=10819 -DARDUINO_AVR_NANO -DARDUINO_ARCH_AVR "-IC:\Users\marti\AppData\Local\Arduino15\packages\arduino\hardware\avr\1.8.6\cores\arduino" "-IC:\Users\marti\AppData\Local\Arduino15\packages\arduino\hardware\avr\1.8.6\variants\eightanaloginputs" "-IC:\Users\marti\AppData\Local\Arduino15\packages\arduino\hardware\avr\1.8.6\libraries\SPI\src" "-IC:\Users\marti\AppData\Local\Arduino15\packages\arduino\hardware\avr\1.8.6\libraries\Wire\src" "-IC:\Users\marti\OneDrive\Dokumente\Arduino\libraries\Adafruit_GFX_Library" "-IC:\Users\marti\OneDrive\Dokumente\Arduino\libraries\Adafruit_BusIO" "C:\Users\marti\AppData\Local\Temp\arduino_build_544490\sketch\N-Modellbahn_MoBa-Speed_for_Arduino_V1-4_by-Bernhard_OLED_1-3.ino.cpp" -o nul

Alternatives for Adafruit_SH1106.h: [Adafruit_SH1106-master]

ResolveLibrary(Adafruit_SH1106.h)

-> candidates: [Adafruit_SH1106-master]

"C:\Users\marti\AppData\Local\Arduino15\packages\arduino\tools\avr-gcc\7.3.0-atmel3.6.1-arduino7/bin/avr-g++" -c -g -Os -w -std=gnu++11 -fpermissive -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics -Wno-error=narrowing -flto -w -x c++ -E -CC -mmcu=atmega328p -DF_CPU=16000000L -DARDUINO=10819 -DARDUINO_AVR_NANO -DARDUINO_ARCH_AVR "-IC:\Users\marti\AppData\Local\Arduino15\packages\arduino\hardware\avr\1.8.6\cores\arduino" "-IC:\Users\marti\AppData\Local\Arduino15\packages\arduino\hardware\avr\1.8.6\variants\eightanaloginputs" "-IC:\Users\marti\AppData\Local\Arduino15\packages\arduino\hardware\avr\1.8.6\libraries\SPI\src" "-IC:\Users\marti\AppData\Local\Arduino15\packages\arduino\hardware\avr\1.8.6\libraries\Wire\src" "-IC:\Users\marti\OneDrive\Dokumente\Arduino\libraries\Adafruit_GFX_Library" "-IC:\Users\marti\OneDrive\Dokumente\Arduino\libraries\Adafruit_BusIO" "-IC:\Users\marti\OneDrive\Dokumente\Arduino\libraries\Adafruit_SH1106-master" "C:\Users\marti\AppData\Local\Temp\arduino_build_544490\sketch\N-Modellbahn_MoBa-Speed_for_Arduino_V1-4_by-Bernhard_OLED_1-3.ino.cpp" -o nul

"C:\Users\marti\AppData\Local\Arduino15\packages\arduino\tools\avr-gcc\7.3.0-atmel3.6.1-arduino7/bin/avr-g++" -c -g -Os -w -std=gnu++11 -fpermissive -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics -Wno-error=narrowing -flto -w -x c++ -E -CC -mmcu=atmega328p -DF_CPU=16000000L -DARDUINO=10819 -DARDUINO_AVR_NANO -DARDUINO_ARCH_AVR "-IC:\Users\marti\AppData\Local\Arduino15\packages\arduino\hardware\avr\1.8.6\cores\arduino" "-IC:\Users\marti\AppData\Local\Arduino15\packages\arduino\hardware\avr\1.8.6\variants\eightanaloginputs" "-IC:\Users\marti\AppData\Local\Arduino15\packages\arduino\hardware\avr\1.8.6\libraries\SPI\src" "-IC:\Users\marti\AppData\Local\Arduino15\packages\arduino\hardware\avr\1.8.6\libraries\Wire\src" "-IC:\Users\marti\OneDrive\Dokumente\Arduino\libraries\Adafruit_GFX_Library" "-IC:\Users\marti\OneDrive\Dokumente\Arduino\libraries\Adafruit_BusIO" "-IC:\Users\marti\OneDrive\Dokumente\Arduino\libraries\Adafruit_SH1106-master" "C:\Users\marti\AppData\Local\Temp\arduino_build_544490\sketch\Adafruit_SH1106.cpp" -o nul

"C:\Users\marti\AppData\Local\Arduino15\packages\arduino\tools\avr-gcc\7.3.0-atmel3.6.1-arduino7/bin/avr-g++" -c -g -Os -w -std=gnu++11 -fpermissive -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics -Wno-error=narrowing -flto -w -x c++ -E -CC -mmcu=atmega328p -DF_CPU=16000000L -DARDUINO=10819 -DARDUINO_AVR_NANO -DARDUINO_ARCH_AVR "-IC:\Users\marti\AppData\Local\Arduino15\packages\arduino\hardware\avr\1.8.6\cores\arduino" "-IC:\Users\marti\AppData\Local\Arduino15\packages\arduino\hardware\avr\1.8.6\variants\eightanaloginputs" "-IC:\Users\marti\AppData\Local\Arduino15\packages\arduino\hardware\avr\1.8.6\libraries\SPI\src" "-IC:\Users\marti\AppData\Local\Arduino15\packages\arduino\hardware\avr\1.8.6\libraries\Wire\src" "-IC:\Users\marti\OneDrive\Dokumente\Arduino\libraries\Adafruit_GFX_Library" "-IC:\Users\marti\OneDrive\Dokumente\Arduino\libraries\Adafruit_BusIO" "-IC:\Users\marti\OneDrive\Dokumente\Arduino\libraries\Adafruit_SH1106-master" "C:\Users\marti\AppData\Local\Arduino15\packages\arduino\hardware\avr\1.8.6\libraries\SPI\src\SPI.cpp" -o nul

"C:\Users\marti\AppData\Local\Arduino15\packages\arduino\tools\avr-gcc\7.3.0-atmel3.6.1-arduino7/bin/avr-g++" -c -g -Os -w -std=gnu++11 -fpermissive -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics -Wno-error=narrowing -flto -w -x c++ -E -CC -mmcu=atmega328p -DF_CPU=16000000L -DARDUINO=10819 -DARDUINO_AVR_NANO -DARDUINO_ARCH_AVR "-IC:\Users\marti\AppData\Local\Arduino15\packages\arduino\hardware\avr\1.8.6\cores\arduino" "-IC:\Users\marti\AppData\Local\Arduino15\packages\arduino\hardware\avr\1.8.6\variants\eightanaloginputs" "-IC:\Users\marti\AppData\Local\Arduino15\packages\arduino\hardware\avr\1.8.6\libraries\SPI\src" "-IC:\Users\marti\AppData\Local\Arduino15\packages\arduino\hardware\avr\1.8.6\libraries\Wire\src" "-IC:\Users\marti\OneDrive\Dokumente\Arduino\libraries\Adafruit_GFX_Library" "-IC:\Users\marti\OneDrive\Dokumente\Arduino\libraries\Adafruit_BusIO" "-IC:\Users\marti\OneDrive\Dokumente\Arduino\libraries\Adafruit_SH1106-master" "C:\Users\marti\AppData\Local\Arduino15\packages\arduino\hardware\avr\1.8.6\libraries\Wire\src\Wire.cpp" -o nul

"C:\Users\marti\AppData\Local\Arduino15\packages\arduino\tools\avr-gcc\7.3.0-atmel3.6.1-arduino7/bin/avr-g++" -c -g -Os -w -std=gnu++11 -fpermissive -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics -Wno-error=narrowing -flto -w -x c++ -E -CC -mmcu=atmega328p -DF_CPU=16000000L -DARDUINO=10819 -DARDUINO_AVR_NANO -DARDUINO_ARCH_AVR "-IC:\Users\marti\AppData\Local\Arduino15\packages\arduino\hardware\avr\1.8.6\cores\arduino" "-IC:\Users\marti\AppData\Local\Arduino15\packages\arduino\hardware\avr\1.8.6\variants\eightanaloginputs" "-IC:\Users\marti\AppData\Local\Arduino15\packages\arduino\hardware\avr\1.8.6\libraries\SPI\src" "-IC:\Users\marti\AppData\Local\Arduino15\packages\arduino\hardware\avr\1.8.6\libraries\Wire\src" "-IC:\Users\marti\OneDrive\Dokumente\Arduino\libraries\Adafruit_GFX_Library" "-IC:\Users\marti\OneDrive\Dokumente\Arduino\libraries\Adafruit_BusIO" "-IC:\Users\marti\OneDrive\Dokumente\Arduino\libraries\Adafruit_SH1106-master" "C:\Users\marti\AppData\Local\Arduino15\packages\arduino\hardware\avr\1.8.6\libraries\Wire\src\utility\twi.c" -o nul

"C:\Users\marti\AppData\Local\Arduino15\packages\arduino\tools\avr-gcc\7.3.0-atmel3.6.1-arduino7/bin/avr-g++" -c -g -Os -w -std=gnu++11 -fpermissive -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics -Wno-error=narrowing -flto -w -x c++ -E -CC -mmcu=atmega328p -DF_CPU=16000000L -DARDUINO=10819 -DARDUINO_AVR_NANO -DARDUINO_ARCH_AVR "-IC:\Users\marti\AppData\Local\Arduino15\packages\arduino\hardware\avr\1.8.6\cores\arduino" "-IC:\Users\marti\AppData\Local\Arduino15\packages\arduino\hardware\avr\1.8.6\variants\eightanaloginputs" "-IC:\Users\marti\AppData\Local\Arduino15\packages\arduino\hardware\avr\1.8.6\libraries\SPI\src" "-IC:\Users\marti\AppData\Local\Arduino15\packages\arduino\hardware\avr\1.8.6\libraries\Wire\src" "-IC:\Users\marti\OneDrive\Dokumente\Arduino\libraries\Adafruit_GFX_Library" "-IC:\Users\marti\OneDrive\Dokumente\Arduino\libraries\Adafruit_BusIO" "-IC:\Users\marti\OneDrive\Dokumente\Arduino\libraries\Adafruit_SH1106-master" "C:\Users\marti\OneDrive\Dokumente\Arduino\libraries\Adafruit_GFX_Library\Adafruit_GFX.cpp" -o nul

"C:\Users\marti\AppData\Local\Arduino15\packages\arduino\tools\avr-gcc\7.3.0-atmel3.6.1-arduino7/bin/avr-g++" -c -g -Os -w -std=gnu++11 -fpermissive -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics -Wno-error=narrowing -flto -w -x c++ -E -CC -mmcu=atmega328p -DF_CPU=16000000L -DARDUINO=10819 -DARDUINO_AVR_NANO -DARDUINO_ARCH_AVR "-IC:\Users\marti\AppData\Local\Arduino15\packages\arduino\hardware\avr\1.8.6\cores\arduino" "-IC:\Users\marti\AppData\Local\Arduino15\packages\arduino\hardware\avr\1.8.6\variants\eightanaloginputs" "-IC:\Users\marti\AppData\Local\Arduino15\packages\arduino\hardware\avr\1.8.6\libraries\SPI\src" "-IC:\Users\marti\AppData\Local\Arduino15\packages\arduino\hardware\avr\1.8.6\libraries\Wire\src" "-IC:\Users\marti\OneDrive\Dokumente\Arduino\libraries\Adafruit_GFX_Library" "-IC:\Users\marti\OneDrive\Dokumente\Arduino\libraries\Adafruit_BusIO" "-IC:\Users\marti\OneDrive\Dokumente\Arduino\libraries\Adafruit_SH1106-master" "C:\Users\marti\OneDrive\Dokumente\Arduino\libraries\Adafruit_GFX_Library\Adafruit_GrayOLED.cpp" -o nul

"C:\Users\marti\AppData\Local\Arduino15\packages\arduino\tools\avr-gcc\7.3.0-atmel3.6.1-arduino7/bin/avr-g++" -c -g -Os -w -std=gnu++11 -fpermissive -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics -Wno-error=narrowing -flto -w -x c++ -E -CC -mmcu=atmega328p -DF_CPU=16000000L -DARDUINO=10819 -DARDUINO_AVR_NANO -DARDUINO_ARCH_AVR "-IC:\Users\marti\AppData\Local\Arduino15\packages\arduino\hardware\avr\1.8.6\cores\arduino" "-IC:\Users\marti\AppData\Local\Arduino15\packages\arduino\hardware\avr\1.8.6\variants\eightanaloginputs" "-IC:\Users\marti\AppData\Local\Arduino15\packages\arduino\hardware\avr\1.8.6\libraries\SPI\src" "-IC:\Users\marti\AppData\Local\Arduino15\packages\arduino\hardware\avr\1.8.6\libraries\Wire\src" "-IC:\Users\marti\OneDrive\Dokumente\Arduino\libraries\Adafruit_GFX_Library" "-IC:\Users\marti\OneDrive\Dokumente\Arduino\libraries\Adafruit_BusIO" "-IC:\Users\marti\OneDrive\Dokumente\Arduino\libraries\Adafruit_SH1106-master" "C:\Users\marti\OneDrive\Dokumente\Arduino\libraries\Adafruit_GFX_Library\Adafruit_SPITFT.cpp" -o nul

"C:\Users\marti\AppData\Local\Arduino15\packages\arduino\tools\avr-gcc\7.3.0-atmel3.6.1-arduino7/bin/avr-g++" -c -g -Os -w -std=gnu++11 -fpermissive -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics -Wno-error=narrowing -flto -w -x c++ -E -CC -mmcu=atmega328p -DF_CPU=16000000L -DARDUINO=10819 -DARDUINO_AVR_NANO -DARDUINO_ARCH_AVR "-IC:\Users\marti\AppData\Local\Arduino15\packages\arduino\hardware\avr\1.8.6\cores\arduino" "-IC:\Users\marti\AppData\Local\Arduino15\packages\arduino\hardware\avr\1.8.6\variants\eightanaloginputs" "-IC:\Users\marti\AppData\Local\Arduino15\packages\arduino\hardware\avr\1.8.6\libraries\SPI\src" "-IC:\Users\marti\AppData\Local\Arduino15\packages\arduino\hardware\avr\1.8.6\libraries\Wire\src" "-IC:\Users\marti\OneDrive\Dokumente\Arduino\libraries\Adafruit_GFX_Library" "-IC:\Users\marti\OneDrive\Dokumente\Arduino\libraries\Adafruit_BusIO" "-IC:\Users\marti\OneDrive\Dokumente\Arduino\libraries\Adafruit_SH1106-master" "C:\Users\marti\OneDrive\Dokumente\Arduino\libraries\Adafruit_GFX_Library\glcdfont.c" -o nul

"C:\Users\marti\AppData\Local\Arduino15\packages\arduino\tools\avr-gcc\7.3.0-atmel3.6.1-arduino7/bin/avr-g++" -c -g -Os -w -std=gnu++11 -fpermissive -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics -Wno-error=narrowing -flto -w -x c++ -E -CC -mmcu=atmega328p -DF_CPU=16000000L -DARDUINO=10819 -DARDUINO_AVR_NANO -DARDUINO_ARCH_AVR "-IC:\Users\marti\AppData\Local\Arduino15\packages\arduino\hardware\avr\1.8.6\cores\arduino" "-IC:\Users\marti\AppData\Local\Arduino15\packages\arduino\hardware\avr\1.8.6\variants\eightanaloginputs" "-IC:\Users\marti\AppData\Local\Arduino15\packages\arduino\hardware\avr\1.8.6\libraries\SPI\src" "-IC:\Users\marti\AppData\Local\Arduino15\packages\arduino\hardware\avr\1.8.6\libraries\Wire\src" "-IC:\Users\marti\OneDrive\Dokumente\Arduino\libraries\Adafruit_GFX_Library" "-IC:\Users\marti\OneDrive\Dokumente\Arduino\libraries\Adafruit_BusIO" "-IC:\Users\marti\OneDrive\Dokumente\Arduino\libraries\Adafruit_SH1106-master" "C:\Users\marti\OneDrive\Dokumente\Arduino\libraries\Adafruit_BusIO\Adafruit_BusIO_Register.cpp" -o nul

"C:\Users\marti\AppData\Local\Arduino15\packages\arduino\tools\avr-gcc\7.3.0-atmel3.6.1-arduino7/bin/avr-g++" -c -g -Os -w -std=gnu++11 -fpermissive -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics -Wno-error=narrowing -flto -w -x c++ -E -CC -mmcu=atmega328p -DF_CPU=16000000L -DARDUINO=10819 -DARDUINO_AVR_NANO -DARDUINO_ARCH_AVR "-IC:\Users\marti\AppData\Local\Arduino15\packages\arduino\hardware\avr\1.8.6\cores\arduino" "-IC:\Users\marti\AppData\Local\Arduino15\packages\arduino\hardware\avr\1.8.6\variants\eightanaloginputs" "-IC:\Users\marti\AppData\Local\Arduino15\packages\arduino\hardware\avr\1.8.6\libraries\SPI\src" "-IC:\Users\marti\AppData\Local\Arduino15\packages\arduino\hardware\avr\1.8.6\libraries\Wire\src" "-IC:\Users\marti\OneDrive\Dokumente\Arduino\libraries\Adafruit_GFX_Library" "-IC:\Users\marti\OneDrive\Dokumente\Arduino\libraries\Adafruit_BusIO" "-IC:\Users\marti\OneDrive\Dokumente\Arduino\libraries\Adafruit_SH1106-master" "C:\Users\marti\OneDrive\Dokumente\Arduino\libraries\Adafruit_BusIO\Adafruit_I2CDevice.cpp" -o nul

"C:\Users\marti\AppData\Local\Arduino15\packages\arduino\tools\avr-gcc\7.3.0-atmel3.6.1-arduino7/bin/avr-g++" -c -g -Os -w -std=gnu++11 -fpermissive -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics -Wno-error=narrowing -flto -w -x c++ -E -CC -mmcu=atmega328p -DF_CPU=16000000L -DARDUINO=10819 -DARDUINO_AVR_NANO -DARDUINO_ARCH_AVR "-IC:\Users\marti\AppData\Local\Arduino15\packages\arduino\hardware\avr\1.8.6\cores\arduino" "-IC:\Users\marti\AppData\Local\Arduino15\packages\arduino\hardware\avr\1.8.6\variants\eightanaloginputs" "-IC:\Users\marti\AppData\Local\Arduino15\packages\arduino\hardware\avr\1.8.6\libraries\SPI\src" "-IC:\Users\marti\AppData\Local\Arduino15\packages\arduino\hardware\avr\1.8.6\libraries\Wire\src" "-IC:\Users\marti\OneDrive\Dokumente\Arduino\libraries\Adafruit_GFX_Library" "-IC:\Users\marti\OneDrive\Dokumente\Arduino\libraries\Adafruit_BusIO" "-IC:\Users\marti\OneDrive\Dokumente\Arduino\libraries\Adafruit_SH1106-master" "C:\Users\marti\OneDrive\Dokumente\Arduino\libraries\Adafruit_BusIO\Adafruit_SPIDevice.cpp" -o nul

"C:\Users\marti\AppData\Local\Arduino15\packages\arduino\tools\avr-gcc\7.3.0-atmel3.6.1-arduino7/bin/avr-g++" -c -g -Os -w -std=gnu++11 -fpermissive -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics -Wno-error=narrowing -flto -w -x c++ -E -CC -mmcu=atmega328p -DF_CPU=16000000L -DARDUINO=10819 -DARDUINO_AVR_NANO -DARDUINO_ARCH_AVR "-IC:\Users\marti\AppData\Local\Arduino15\packages\arduino\hardware\avr\1.8.6\cores\arduino" "-IC:\Users\marti\AppData\Local\Arduino15\packages\arduino\hardware\avr\1.8.6\variants\eightanaloginputs" "-IC:\Users\marti\AppData\Local\Arduino15\packages\arduino\hardware\avr\1.8.6\libraries\SPI\src" "-IC:\Users\marti\AppData\Local\Arduino15\packages\arduino\hardware\avr\1.8.6\libraries\Wire\src" "-IC:\Users\marti\OneDrive\Dokumente\Arduino\libraries\Adafruit_GFX_Library" "-IC:\Users\marti\OneDrive\Dokumente\Arduino\libraries\Adafruit_BusIO" "-IC:\Users\marti\OneDrive\Dokumente\Arduino\libraries\Adafruit_SH1106-master" "C:\Users\marti\OneDrive\Dokumente\Arduino\libraries\Adafruit_SH1106-master\Adafruit_SH1106.cpp" -o nul

Generating function prototypes...

"C:\Users\marti\AppData\Local\Arduino15\packages\arduino\tools\avr-gcc\7.3.0-atmel3.6.1-arduino7/bin/avr-g++" -c -g -Os -w -std=gnu++11 -fpermissive -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics -Wno-error=narrowing -flto -w -x c++ -E -CC -mmcu=atmega328p -DF_CPU=16000000L -DARDUINO=10819 -DARDUINO_AVR_NANO -DARDUINO_ARCH_AVR "-IC:\Users\marti\AppData\Local\Arduino15\packages\arduino\hardware\avr\1.8.6\cores\arduino" "-IC:\Users\marti\AppData\Local\Arduino15\packages\arduino\hardware\avr\1.8.6\variants\eightanaloginputs" "-IC:\Users\marti\AppData\Local\Arduino15\packages\arduino\hardware\avr\1.8.6\libraries\SPI\src" "-IC:\Users\marti\AppData\Local\Arduino15\packages\arduino\hardware\avr\1.8.6\libraries\Wire\src" "-IC:\Users\marti\OneDrive\Dokumente\Arduino\libraries\Adafruit_GFX_Library" "-IC:\Users\marti\OneDrive\Dokumente\Arduino\libraries\Adafruit_BusIO" "-IC:\Users\marti\OneDrive\Dokumente\Arduino\libraries\Adafruit_SH1106-master" "C:\Users\marti\AppData\Local\Temp\arduino_build_544490\sketch\N-Modellbahn_MoBa-Speed_for_Arduino_V1-4_by-Bernhard_OLED_1-3.ino.cpp" -o "C:\Users\marti\AppData\Local\Temp\arduino_build_544490\preproc\ctags_target_for_gcc_minus_e.cpp"

"C:\Program Files (x86)\Arduino\tools-builder\ctags\5.8-arduino11/ctags" -u --language-force=c++ -f - --c++-kinds=svpf --fields=KSTtzns --line-directives "C:\Users\marti\AppData\Local\Temp\arduino_build_544490\preproc\ctags_target_for_gcc_minus_e.cpp"

Sketch wird kompiliert...

"C:\Users\marti\AppData\Local\Arduino15\packages\arduino\tools\avr-gcc\7.3.0-atmel3.6.1-arduino7/bin/avr-g++" -c -g -Os -std=gnu++11 -fpermissive -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics -Wno-error=narrowing -MMD -flto -mmcu=atmega328p -DF_CPU=16000000L -DARDUINO=10819 -DARDUINO_AVR_NANO -DARDUINO_ARCH_AVR "-IC:\Users\marti\AppData\Local\Arduino15\packages\arduino\hardware\avr\1.8.6\cores\arduino" "-IC:\Users\marti\AppData\Local\Arduino15\packages\arduino\hardware\avr\1.8.6\variants\eightanaloginputs" "-IC:\Users\marti\AppData\Local\Arduino15\packages\arduino\hardware\avr\1.8.6\libraries\SPI\src" "-IC:\Users\marti\AppData\Local\Arduino15\packages\arduino\hardware\avr\1.8.6\libraries\Wire\src" "-IC:\Users\marti\OneDrive\Dokumente\Arduino\libraries\Adafruit_GFX_Library" "-IC:\Users\marti\OneDrive\Dokumente\Arduino\libraries\Adafruit_BusIO" "-IC:\Users\marti\OneDrive\Dokumente\Arduino\libraries\Adafruit_SH1106-master" "C:\Users\marti\AppData\Local\Temp\arduino_build_544490\sketch\Adafruit_SH1106.cpp" -o "C:\Users\marti\AppData\Local\Temp\arduino_build_544490\sketch\Adafruit_SH1106.cpp.o"

"C:\Users\marti\AppData\Local\Arduino15\packages\arduino\tools\avr-gcc\7.3.0-atmel3.6.1-arduino7/bin/avr-g++" -c -g -Os -std=gnu++11 -fpermissive -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics -Wno-error=narrowing -MMD -flto -mmcu=atmega328p -DF_CPU=16000000L -DARDUINO=10819 -DARDUINO_AVR_NANO -DARDUINO_ARCH_AVR "-IC:\Users\marti\AppData\Local\Arduino15\packages\arduino\hardware\avr\1.8.6\cores\arduino" "-IC:\Users\marti\AppData\Local\Arduino15\packages\arduino\hardware\avr\1.8.6\variants\eightanaloginputs" "-IC:\Users\marti\AppData\Local\Arduino15\packages\arduino\hardware\avr\1.8.6\libraries\SPI\src" "-IC:\Users\marti\AppData\Local\Arduino15\packages\arduino\hardware\avr\1.8.6\libraries\Wire\src" "-IC:\Users\marti\OneDrive\Dokumente\Arduino\libraries\Adafruit_GFX_Library" "-IC:\Users\marti\OneDrive\Dokumente\Arduino\libraries\Adafruit_BusIO" "-IC:\Users\marti\OneDrive\Dokumente\Arduino\libraries\Adafruit_SH1106-master" "C:\Users\marti\AppData\Local\Temp\arduino_build_544490\sketch\N-Modellbahn_MoBa-Speed_for_Arduino_V1-4_by-Bernhard_OLED_1-3.ino.cpp" -o "C:\Users\marti\AppData\Local\Temp\arduino_build_544490\sketch\N-Modellbahn_MoBa-Speed_for_Arduino_V1-4_by-Bernhard_OLED_1-3.ino.cpp.o"

In file included from D:\Digikeijs\N-Modellbahn_MoBa-Speed_for_Arduino_V1-1_to_V1-4\N-Modellbahn_MoBa-Speed_for_Arduino_V1-4_by-Bernhard_OLED_1-3\sh1106_128x64_i2c.ino:29:0:

Adafruit_SH1106.h:141:7: error: redefinition of 'class Adafruit_SH1106'

class Adafruit_SH1106 : public Adafruit_GFX {

   ^~~~~~~~~~~~~~~

In file included from D:\Digikeijs\N-Modellbahn_MoBa-Speed_for_Arduino_V1-1_to_V1-4\N-Modellbahn_MoBa-Speed_for_Arduino_V1-4_by-Bernhard_OLED_1-3\N-Modellbahn_MoBa-Speed_for_Arduino_V1-4_by-Bernhard_OLED_1-3.ino:24:0:

C:\Users\marti\OneDrive\Dokumente\Arduino\libraries\Adafruit_SH1106-master/Adafruit_SH1106.h:141:7: note: previous definition of 'class Adafruit_SH1106'

class Adafruit_SH1106 : public Adafruit_GFX {

   ^~~~~~~~~~~~~~~

sh1106_128x64_i2c:32:24: error: redefinition of 'Adafruit_SH1106 display'

Adafruit_SH1106 display(OLED_RESET);

D:\Digikeijs\N-Modellbahn_MoBa-Speed_for_Arduino_V1-1_to_V1-4\N-Modellbahn_MoBa-Speed_for_Arduino_V1-4_by-Bernhard_OLED_1-3\N-Modellbahn_MoBa-Speed_for_Arduino_V1-4_by-Bernhard_OLED_1-3.ino:28:17: note: 'Adafruit_SH1106 display' previously declared here

Adafruit_SH1106 display(OLED_RESET); // 1.3 INCH OLED DISPLAY INIT

             ^~~~~~~

D:\Digikeijs\N-Modellbahn_MoBa-Speed_for_Arduino_V1-1_to_V1-4\N-Modellbahn_MoBa-Speed_for_Arduino_V1-4_by-Bernhard_OLED_1-3\sh1106_128x64_i2c.ino: In function 'void setup()':

sh1106_128x64_i2c:64:6: error: redefinition of 'void setup()'

void setup() {

  ^~~~~

D:\Digikeijs\N-Modellbahn_MoBa-Speed_for_Arduino_V1-1_to_V1-4\N-Modellbahn_MoBa-Speed_for_Arduino_V1-4_by-Bernhard_OLED_1-3\N-Modellbahn_MoBa-Speed_for_Arduino_V1-4_by-Bernhard_OLED_1-3.ino:110:6: note: 'void setup()' previously defined here

void setup() {

  ^~~~~

D:\Digikeijs\N-Modellbahn_MoBa-Speed_for_Arduino_V1-1_to_V1-4\N-Modellbahn_MoBa-Speed_for_Arduino_V1-4_by-Bernhard_OLED_1-3\sh1106_128x64_i2c.ino: In function 'void loop()':

sh1106_128x64_i2c:175:6: error: redefinition of 'void loop()'

void loop() {

  ^~~~

D:\Digikeijs\N-Modellbahn_MoBa-Speed_for_Arduino_V1-1_to_V1-4\N-Modellbahn_MoBa-Speed_for_Arduino_V1-4_by-Bernhard_OLED_1-3\N-Modellbahn_MoBa-Speed_for_Arduino_V1-4_by-Bernhard_OLED_1-3.ino:122:6: note: 'void loop()' previously defined here

void loop() {

  ^~~~

Bibliothek SPI in Version 1.0 im Ordner: C:\Users\marti\AppData\Local\Arduino15\packages\arduino\hardware\avr\1.8.6\libraries\SPI wird verwendet

Bibliothek Wire in Version 1.0 im Ordner: C:\Users\marti\AppData\Local\Arduino15\packages\arduino\hardware\avr\1.8.6\libraries\Wire wird verwendet

Bibliothek Adafruit_GFX_Library in Version 1.11.9 im Ordner: C:\Users\marti\OneDrive\Dokumente\Arduino\libraries\Adafruit_GFX_Library wird verwendet

Bibliothek Adafruit_BusIO in Version 1.14.5 im Ordner: C:\Users\marti\OneDrive\Dokumente\Arduino\libraries\Adafruit_BusIO wird verwendet

Bibliothek Adafruit_SH1106-master im Ordner: C:\Users\marti\OneDrive\Dokumente\Arduino\libraries\Adafruit_SH1106-master (legacy) wird verwendet

exit status 1

redefinition of 'class Adafruit_SH1106'

martinamandel · December 23, 2023, 3:32pm



// MoBa-Speed for ARDUINO V1.4
// powered by N-Modellbahn.de - Joerg Kiessling - 2018
// Version 1.4 is for 1.3 Inch OLED display and was modified by Bernhard Raschke - 2019
// Arduino Sketch for model speed measurement
// for Arduino Nano.V3, UNO.V3, MEGA
// 2 IR Line Trackers with LM393 komperator output
// Notel for OLED resolution: Display OLED 128 x 64px
// Note1 for power supply: connect OLED display VDD to Arduino 3.3V !
// Note1 for OLED adresse: 0x3C is for third party products! Use adresse 0x3D for original Adafruit products!
// Notel for OLED size: This sketch version is for 1.3 Inch OLED display with driver SH1106.h which you can download here https://github.com/wonho-maker/Adafruit_SH1106
                     

// Digital sensor input Left and Right
#define SENSOR_L 7
#define SENSOR_R 6

////// DECLARATIONS
#include <SPI.h> // Not needed when using I2C
#include <Wire.h> //I2C library
#include <Adafruit_GFX.h>
#include <Adafruit_SH1106.h>  // use this library for a 1.3 inch OLED https://github.com/wonho-maker/Adafruit_SH1106
#define SCREEN_WIDTH 128 // OLED display width, in pixels
#define SCREEN_HEIGHT 64 // OLED display height, in pixels
#define OLED_RESET 4
Adafruit_SH1106 display(OLED_RESET); // 1.3 INCH OLED DISPLAY INIT

//Distance from sensor Left to sensor Right - your distance (mm)
const double distance = 386.0;

//Your model scale 1/xx
int scale = 120;

//Waiting time to display results (ms)
int waitingtime = 5000;

//Name of variables for time and speed measuring
long int deltatime, starttime, freetime;

//N-Modellbahn.de Logo - MoBa Speed for Arduino
const unsigned char PROGMEM logo [] = {
  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
  0x7F, 0xFF, 0xFF, 0xF0, 0x00, 0x00, 0x00, 0x00, 0x21, 0x81, 0x80, 0x03, 0xF0, 0x00, 0x00, 0x00,
  0x7F, 0xFF, 0xFF, 0xF8, 0x00, 0x00, 0x00, 0x00, 0x21, 0xC1, 0x80, 0x03, 0xFC, 0x00, 0x00, 0x00,
  0x7F, 0xFF, 0xFF, 0xF8, 0x00, 0x00, 0x00, 0x00, 0x63, 0xC3, 0xC0, 0x03, 0x0C, 0x00, 0x00, 0x00,
  0x7F, 0xFF, 0xFF, 0xFC, 0x00, 0x00, 0x00, 0x00, 0x63, 0x62, 0xC3, 0xC3, 0x0C, 0x3E, 0x00, 0x00,
  0x7F, 0xFF, 0xFF, 0xFE, 0x00, 0x00, 0x00, 0x00, 0xE3, 0x66, 0xC7, 0xE3, 0xF8, 0x3F, 0x00, 0x00,
  0x7F, 0xFF, 0xFF, 0xFE, 0x00, 0x00, 0x00, 0x00, 0xE3, 0x34, 0xCE, 0x73, 0xFC, 0x03, 0x00, 0x00,
  0x7F, 0xFF, 0xFF, 0xFF, 0x00, 0x00, 0x00, 0x01, 0xE3, 0x34, 0xCC, 0x33, 0x06, 0x3F, 0x3E, 0x00,
  0x7F, 0xFF, 0xFF, 0xFF, 0x00, 0x00, 0x00, 0x01, 0xE3, 0x3C, 0xCC, 0x33, 0x06, 0x7F, 0x3E, 0x00,
  0x7F, 0xFF, 0xFF, 0xFF, 0x80, 0x00, 0x00, 0x03, 0xE3, 0x18, 0xCE, 0x73, 0x0E, 0x63, 0x00, 0x00,
  0x7F, 0xFF, 0xFF, 0xFF, 0x80, 0x00, 0x00, 0x03, 0xE3, 0x18, 0xC7, 0xE3, 0xFC, 0x7F, 0x00, 0x00,
  0x7F, 0xFF, 0xFF, 0xFF, 0xC0, 0x00, 0x00, 0x07, 0xE3, 0x00, 0xC3, 0xC3, 0xF8, 0x3F, 0x00, 0x00,
  0x7F, 0xFF, 0xFF, 0xFF, 0xC0, 0x00, 0x00, 0x07, 0xE0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
  0x7F, 0xFF, 0xFF, 0xFF, 0xE0, 0x00, 0x00, 0x0F, 0xE0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
  0x7F, 0xFF, 0xFF, 0xFF, 0xE0, 0x00, 0x00, 0x0F, 0xE0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
  0x7F, 0xFF, 0xFF, 0xFF, 0xF0, 0x00, 0x00, 0x0F, 0xE0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x60, 0x00,
  0x7F, 0xFF, 0xFF, 0xFF, 0xF0, 0x00, 0x00, 0x1F, 0xE1, 0xF8, 0x00, 0x00, 0x00, 0x00, 0x60, 0x00,
  0x7F, 0xFF, 0xFF, 0xFF, 0xF8, 0x00, 0x00, 0x1F, 0xE3, 0xF8, 0x00, 0x00, 0x00, 0x00, 0x60, 0x00,
  0x7F, 0xFF, 0xFF, 0xFF, 0xF8, 0x00, 0x00, 0x3F, 0xE3, 0x00, 0x00, 0x00, 0x00, 0x00, 0x60, 0x00,
  0x7F, 0xFF, 0xFF, 0xFF, 0xFC, 0x00, 0x00, 0x3F, 0xE3, 0x01, 0xF8, 0x1E, 0x0F, 0x07, 0xE0, 0x00,
  0x7F, 0xFF, 0xE7, 0xFF, 0xFC, 0x00, 0x00, 0x7F, 0xE3, 0xC1, 0xFC, 0x3F, 0x1F, 0x8F, 0xE0, 0x00,
  0x7F, 0xFF, 0xE7, 0xFF, 0xFE, 0x00, 0x00, 0x7F, 0xE1, 0xF1, 0x8E, 0x63, 0x31, 0x9C, 0x60, 0x00,
  0x7F, 0xFF, 0xC3, 0xFF, 0xFE, 0x00, 0x00, 0xFF, 0xE0, 0x79, 0x86, 0x7F, 0x3F, 0x98, 0x60, 0x00,
  0x7F, 0xFF, 0xC3, 0xFF, 0xFF, 0x00, 0x00, 0xFF, 0xE0, 0x19, 0x86, 0x60, 0x30, 0x18, 0x60, 0x00,
  0x7F, 0xFF, 0x81, 0xFF, 0xFF, 0x00, 0x01, 0xFF, 0xE0, 0x19, 0x8E, 0x72, 0x39, 0x1C, 0x60, 0x00,
  0x7F, 0xFF, 0x81, 0xFF, 0xFF, 0x80, 0x01, 0xFF, 0xE3, 0xF9, 0xFC, 0x3E, 0x1F, 0x0F, 0xE0, 0x00,
  0x7F, 0xFF, 0x00, 0xFF, 0xFF, 0x80, 0x03, 0xFF, 0xE3, 0xF1, 0xF8, 0x1C, 0x0E, 0x07, 0xE0, 0x00,
  0x7F, 0xFF, 0x00, 0xFF, 0xFF, 0xC0, 0x03, 0xFF, 0xE0, 0x01, 0x80, 0x00, 0x00, 0x00, 0x00, 0x00,
  0x7F, 0xFE, 0x00, 0x7F, 0xFF, 0xC0, 0x03, 0xFF, 0xE0, 0x01, 0x80, 0x00, 0x00, 0x00, 0x00, 0x00,
  0x7F, 0xFE, 0x00, 0x7F, 0xFF, 0xE0, 0x07, 0xFF, 0xE0, 0x01, 0x80, 0x00, 0x00, 0x00, 0x00, 0x00,
  0x7F, 0xFC, 0x00, 0x3F, 0xFF, 0xE0, 0x07, 0xFF, 0xE0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
  0x7F, 0xFC, 0x00, 0x3F, 0xFF, 0xF0, 0x0F, 0xFF, 0xE0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
  0x7F, 0xF8, 0x00, 0x1F, 0xFF, 0xF0, 0x0F, 0xFF, 0xE1, 0xE0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
  0x7F, 0xF8, 0x00, 0x1F, 0xFF, 0xF8, 0x1F, 0xFF, 0xE3, 0xE0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
  0x7F, 0xF8, 0x00, 0x0F, 0xFF, 0xF8, 0x1F, 0xFF, 0xE3, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
  0x7F, 0xF0, 0x00, 0x0F, 0xFF, 0xFC, 0x3F, 0xFF, 0xE3, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
  0x7F, 0xF0, 0x00, 0x07, 0xFF, 0xFC, 0x3F, 0xFF, 0xE3, 0xE3, 0xC3, 0xE0, 0x00, 0x00, 0x00, 0x00,
  0x7F, 0xE0, 0x00, 0x07, 0xFF, 0xFE, 0x7F, 0xFF, 0xE3, 0xE7, 0xE3, 0xE0, 0x00, 0x00, 0x00, 0x00,
  0x7F, 0xE0, 0x00, 0x03, 0xFF, 0xFE, 0x7F, 0xFF, 0xE3, 0x0E, 0x73, 0x00, 0x00, 0x00, 0x00, 0x00,
  0x7F, 0xC0, 0x00, 0x01, 0xFF, 0xFF, 0xFF, 0xFF, 0xE3, 0x0C, 0x33, 0x00, 0x00, 0x00, 0x00, 0x00,
  0x7F, 0xC0, 0x00, 0x01, 0xFF, 0xFF, 0xFF, 0xFF, 0xE3, 0x0C, 0x33, 0x00, 0x00, 0x00, 0x00, 0x00,
  0x7F, 0x80, 0x00, 0x00, 0xFF, 0xFF, 0xFF, 0xFF, 0xE3, 0x0E, 0x73, 0x00, 0x00, 0x00, 0x00, 0x00,
  0x7F, 0x80, 0x00, 0x00, 0xFF, 0xFF, 0xFF, 0xFF, 0xE3, 0x07, 0xE3, 0x00, 0x00, 0x00, 0x00, 0x00,
  0x7F, 0x00, 0x00, 0x00, 0x7F, 0xFF, 0xFF, 0xFF, 0xE3, 0x03, 0xC3, 0x00, 0x00, 0x00, 0x00, 0x00,
  0x7F, 0x00, 0x00, 0x00, 0x7F, 0xFF, 0xFF, 0xFF, 0xE0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
  0x7E, 0x00, 0x00, 0x00, 0x3F, 0xFF, 0xFF, 0xFF, 0xE0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
  0x7E, 0x00, 0x00, 0x00, 0x3F, 0xFF, 0xFF, 0xFF, 0xE0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
  0x7E, 0x00, 0x00, 0x00, 0x1F, 0xFF, 0xFF, 0xFF, 0xE0, 0x00, 0x00, 0x06, 0x00, 0x00, 0x00, 0x00,
  0x7C, 0x00, 0x00, 0x00, 0x1F, 0xFF, 0xFF, 0xFF, 0xE0, 0x70, 0x00, 0x06, 0x00, 0x30, 0x00, 0x00,
  0x7C, 0x00, 0x00, 0x00, 0x0F, 0xFF, 0xFF, 0xFF, 0xE0, 0x70, 0x00, 0x06, 0x00, 0x30, 0x00, 0x00,
  0x78, 0x00, 0x00, 0x00, 0x0F, 0xFF, 0xFF, 0xFF, 0xE0, 0xD8, 0x00, 0x06, 0x00, 0x00, 0x00, 0x00,
  0x78, 0x00, 0x00, 0x00, 0x07, 0xFF, 0xFF, 0xFF, 0xE0, 0xD8, 0x7C, 0x7E, 0x63, 0x33, 0xF0, 0x78,
  0x70, 0x00, 0x00, 0x00, 0x07, 0xFF, 0xFF, 0xFF, 0xE1, 0x8C, 0x7C, 0xFE, 0x63, 0x33, 0xF8, 0xFC,
  0x70, 0x00, 0x00, 0x00, 0x03, 0xFF, 0xFF, 0xFF, 0xE1, 0x8C, 0x61, 0xC6, 0x63, 0x33, 0x19, 0xCE,
  0x60, 0x00, 0x00, 0x00, 0x03, 0xFF, 0xFF, 0xFF, 0xE1, 0xFC, 0x61, 0x86, 0x63, 0x33, 0x19, 0x86,
  0x60, 0x00, 0x00, 0x00, 0x01, 0xFF, 0xFF, 0xFF, 0xE3, 0xFE, 0x61, 0x86, 0x63, 0x33, 0x19, 0x86,
  0x40, 0x00, 0x00, 0x00, 0x01, 0xFF, 0xFF, 0xFF, 0xE3, 0x06, 0x61, 0xC6, 0x63, 0x33, 0x19, 0xCE,
  0x40, 0x00, 0x00, 0x00, 0x00, 0xFF, 0xFF, 0xFF, 0xE6, 0x03, 0x60, 0xFE, 0x7F, 0x33, 0x18, 0xFC,
  0x00, 0x00, 0x00, 0x00, 0x00, 0xFF, 0xFF, 0xFF, 0xE6, 0x03, 0x60, 0x7E, 0x3F, 0x33, 0x18, 0x78,
  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00
};

void setup()  {
  //Sensor Input
  pinMode(SENSOR_L, INPUT_PULLUP);
  pinMode(SENSOR_R, INPUT_PULLUP);

  //Interface baud rate
  Serial.begin(9600);

  //Display
  initialize_display();
}

void loop()  {
  //waiting for signal, sensor Left
  if (digitalRead(SENSOR_L) == LOW)
  {
    //Sensor Left was activated, start time = system time (ms)
    starttime = millis();
    underprogress_display();
    //waiting for signal sensor Right
    while (digitalRead(SENSOR_R) == HIGH) {}

    //Measured time in ms
    deltatime = (millis() - starttime);

    refresh_display();
    freetime = 0;
    if (digitalRead(SENSOR_R) == LOW)
    {
      
      freetime = 0;  
      while (freetime < 20)
      {
        freetime++;
   
        if (digitalRead(SENSOR_R) == LOW)
        {
          freetime = 0;  //reset time with new occupation
        }
        delay (100);
     
      }
      delay (100);
    }
    
    state_ready_display();
  }


  //waiting for signal, sensor Right
  if (digitalRead(SENSOR_R) == LOW)
  {
    //Sensor Right was activated, start time = system time (ms)
    starttime = millis();
    underprogress_display();
    //waiting for signal sensor Left
    while (digitalRead(SENSOR_L) == HIGH) {}

    //Measured time in ms
    deltatime = (millis() - starttime);

    refresh_display();
    freetime = 0;
    if (digitalRead(SENSOR_L) == LOW)
    {
      
      freetime = 0; 
      while (freetime < 20)
      {
        freetime++;
        
        if (digitalRead(SENSOR_L) == LOW)
        {
          freetime = 0;  //reset time with new occupation
        }
        delay (100);
     
      }
      delay (100);
    }
    
    state_ready_display();
  }

} //End of loop


//Output on display
void refresh_display() {

  //Output on serial monitor
  Serial.println("Speedcheck running..");
  Serial.println("");
  Serial.println("Deltatime:");
  Serial.print(deltatime);
  Serial.println(" ms");
  Serial.println("---------");
  Serial.println("Speed:");
  Serial.print(distance / deltatime);
  Serial.println(" m/s (real)");
  Serial.print(scale * distance / deltatime * 3.6, 0);
  Serial.print(" km/h (scale 1/");
  Serial.print(scale);
  Serial.println(")");

  //Output on OLED
  display.clearDisplay();
  display.setTextSize(5);
  display.setCursor(0, 28);
  display.print(scale * distance / deltatime * 3.6, 0); //calculating speed in km/h
  display.setTextSize(1);
  display.setCursor(91, 56);
  display.print("km/h");
  display.setCursor(98, 28);
  display.print("1/");
  display.setCursor(110, 28);
  display.print(scale);
  display.drawFastHLine(0, 18, 128, WHITE);
  display.setTextSize(2);
  display.setCursor(0, 0);
  display.print(deltatime * 0.001);
  display.setTextSize(1);
  display.setCursor(50, 7);
  display.print("s");
  display.drawFastVLine(63, 0, 16, WHITE);
  display.setTextSize(2);
  display.setCursor(71, 00);
  display.print(distance / deltatime);
  display.setTextSize(1);
  display.setCursor(121, -2);
  display.print("m");
  display.drawFastHLine(121, 7, 5, WHITE);
  display.setCursor(121, 8);
  display.print("s");
  display.display();

  delay(waitingtime);


}

void state_ready_display() {

  display.clearDisplay();
  display.setTextSize(4);
  display.setCursor(5, 28);
  display.print("READY");
  display.drawFastHLine(0, 18, 128, WHITE);
  display.setTextSize(2);
  display.setCursor(37, 0);
  display.print("1/");
  display.setCursor(60, 0);
  display.print(scale);
  display.display();

  Serial.println("");
  Serial.println("<<< READY >>>");
}

void underprogress_display() {

  display.clearDisplay();
  display.setTextSize(2);
  display.setCursor(0, 20);
  display.println("");
  display.print(" running..");
  display.setTextSize(2);
  display.setCursor(5, 0);
  display.print("Speedcheck");
  display.display();
}

void initialize_display() {
  display.begin(SH1106_SWITCHCAPVCC, 0x3C); // initialize 1.3" OLED display (use adresse 0x3D for original Adafruit product)
  display.display();
  display.clearDisplay();
  display.drawBitmap(0, 0, logo, 128, 64, WHITE);
  display.display();
  display.setTextColor(INVERSE);

  delay(2500);

  display.clearDisplay();
  display.setTextSize(1);
  display.setCursor(0, 0);
  display.println("powered by");
  display.println("by Rainer Mandel");
  display.println("Zillbach");
  display.println("Version 1.4:");
  //display.print("by Bernhard Raschke");
  //display.display();

  delay(3000);

  display.clearDisplay();
  display.setTextSize(4);
  display.setCursor(5, 28);
  display.print("READY");
  display.drawFastHLine(0, 18, 128, WHITE);
  display.setTextSize(2);
  display.setCursor(37, 0);
  display.print("1/");
  display.setCursor(60, 0);
  display.print(scale);
  display.display();

  Serial.println("<<< READY >>>");
}

paulpaulson · December 23, 2023, 3:36pm

Nimm ein einfaches Adafruit_SH1106 Tutorial und überprüfe damit die Verdrahtung und die Funktionalität der Anzeigeeinheit.

Moko · December 23, 2023, 3:53pm

Hast Du, wenn Dein Sketch geöffnet ist, evtl noch einen 2. Tab in der IDE?
Beispiel:

Die Fehlermeldungen verweisen auf 2 Sketche....

D:\Digikeijs\N-Modellbahn_MoBa-Speed_for_Arduino_V1-1_to_V1-4\N-Modellbahn_MoBa-Speed_for_Arduino_V1-4_by-Bernhard_OLED_1-3\N-Modellbahn_MoBa-Speed_for_Arduino_V1-4_by-Bernhard_OLED_1-3.ino

D:\Digikeijs\N-Modellbahn_MoBa-Speed_for_Arduino_V1-1_to_V1-4\N-Modellbahn_MoBa-Speed_for_Arduino_V1-4_by-Bernhard_OLED_1-3\sh1106_128x64_i2c.ino

fony · December 23, 2023, 4:12pm

sh1106_128x64_i2c:175:6: error: redefinition of 'void loop()'

wen schon so eine Error kommt wurde der Sketch falsch zusammen gesetzt doppelt gemoppelt bei kopieren.
Jeder Sketch darf nur einmal void loop und Setup haben.

StefanL38 · December 23, 2023, 4:15pm

einen neuen und leeren Sketch erzeugen

so etwas hier

void setup() {
  // put your setup code here, to run once:

}

void loop() {
  // put your main code here, to run repeatedly:

}

dann diesen Sketch hier unter dem Text
über das Kopiersymbol das oben rechts in der Code-Section erscheint wenn man die Maus auf die obere rechte Ecke der Code-Section bewegt.

Kopiersymbol klicken. Dadurch wird der gesamte Sketch in die Zwischenablage kopiert.

Dann zur Arduino-IDE wechseln.
In der Arduino-IDE alles aus dem leeren Sketch mit Strg-A markieren und dann löschen.
Dann mit Strg-V den Sketch aus der Zwischenablage einfügen.

Den Sketch unter einem aussagekräftigen Namen speichern und dann compilieren
Bei mir compiliert das einwandfrei

// MoBa-Speed for ARDUINO V1.4
// powered by N-Modellbahn.de - Joerg Kiessling - 2018
// Version 1.4 is for 1.3 Inch OLED display and was modified by Bernhard Raschke - 2019
// Arduino Sketch for model speed measurement
// for Arduino Nano.V3, UNO.V3, MEGA
// 2 IR Line Trackers with LM393 komperator output
// Notel for OLED resolution: Display OLED 128 x 64px
// Note1 for power supply: connect OLED display VDD to Arduino 3.3V !
// Note1 for OLED adresse: 0x3C is for third party products! Use adresse 0x3D for original Adafruit products!
// Notel for OLED size: This sketch version is for 1.3 Inch OLED display with driver SH1106.h which you can download here https://github.com/wonho-maker/Adafruit_SH1106
                     

// Digital sensor input Left and Right
#define SENSOR_L 7
#define SENSOR_R 6

////// DECLARATIONS
#include <SPI.h> // Not needed when using I2C
#include <Wire.h> //I2C library
#include <Adafruit_GFX.h>
#include <Adafruit_SH1106.h>  // use this library for a 1.3 inch OLED https://github.com/wonho-maker/Adafruit_SH1106
#define SCREEN_WIDTH 128 // OLED display width, in pixels
#define SCREEN_HEIGHT 64 // OLED display height, in pixels
#define OLED_RESET 4
Adafruit_SH1106 display(OLED_RESET); // 1.3 INCH OLED DISPLAY INIT

//Distance from sensor Left to sensor Right - your distance (mm)
const double distance = 386.0;

//Your model scale 1/xx
int scale = 120;

//Waiting time to display results (ms)
int waitingtime = 5000;

//Name of variables for time and speed measuring
long int deltatime, starttime, freetime;

//N-Modellbahn.de Logo - MoBa Speed for Arduino
const unsigned char PROGMEM logo [] = {
  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
  0x7F, 0xFF, 0xFF, 0xF0, 0x00, 0x00, 0x00, 0x00, 0x21, 0x81, 0x80, 0x03, 0xF0, 0x00, 0x00, 0x00,
  0x7F, 0xFF, 0xFF, 0xF8, 0x00, 0x00, 0x00, 0x00, 0x21, 0xC1, 0x80, 0x03, 0xFC, 0x00, 0x00, 0x00,
  0x7F, 0xFF, 0xFF, 0xF8, 0x00, 0x00, 0x00, 0x00, 0x63, 0xC3, 0xC0, 0x03, 0x0C, 0x00, 0x00, 0x00,
  0x7F, 0xFF, 0xFF, 0xFC, 0x00, 0x00, 0x00, 0x00, 0x63, 0x62, 0xC3, 0xC3, 0x0C, 0x3E, 0x00, 0x00,
  0x7F, 0xFF, 0xFF, 0xFE, 0x00, 0x00, 0x00, 0x00, 0xE3, 0x66, 0xC7, 0xE3, 0xF8, 0x3F, 0x00, 0x00,
  0x7F, 0xFF, 0xFF, 0xFE, 0x00, 0x00, 0x00, 0x00, 0xE3, 0x34, 0xCE, 0x73, 0xFC, 0x03, 0x00, 0x00,
  0x7F, 0xFF, 0xFF, 0xFF, 0x00, 0x00, 0x00, 0x01, 0xE3, 0x34, 0xCC, 0x33, 0x06, 0x3F, 0x3E, 0x00,
  0x7F, 0xFF, 0xFF, 0xFF, 0x00, 0x00, 0x00, 0x01, 0xE3, 0x3C, 0xCC, 0x33, 0x06, 0x7F, 0x3E, 0x00,
  0x7F, 0xFF, 0xFF, 0xFF, 0x80, 0x00, 0x00, 0x03, 0xE3, 0x18, 0xCE, 0x73, 0x0E, 0x63, 0x00, 0x00,
  0x7F, 0xFF, 0xFF, 0xFF, 0x80, 0x00, 0x00, 0x03, 0xE3, 0x18, 0xC7, 0xE3, 0xFC, 0x7F, 0x00, 0x00,
  0x7F, 0xFF, 0xFF, 0xFF, 0xC0, 0x00, 0x00, 0x07, 0xE3, 0x00, 0xC3, 0xC3, 0xF8, 0x3F, 0x00, 0x00,
  0x7F, 0xFF, 0xFF, 0xFF, 0xC0, 0x00, 0x00, 0x07, 0xE0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
  0x7F, 0xFF, 0xFF, 0xFF, 0xE0, 0x00, 0x00, 0x0F, 0xE0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
  0x7F, 0xFF, 0xFF, 0xFF, 0xE0, 0x00, 0x00, 0x0F, 0xE0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
  0x7F, 0xFF, 0xFF, 0xFF, 0xF0, 0x00, 0x00, 0x0F, 0xE0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x60, 0x00,
  0x7F, 0xFF, 0xFF, 0xFF, 0xF0, 0x00, 0x00, 0x1F, 0xE1, 0xF8, 0x00, 0x00, 0x00, 0x00, 0x60, 0x00,
  0x7F, 0xFF, 0xFF, 0xFF, 0xF8, 0x00, 0x00, 0x1F, 0xE3, 0xF8, 0x00, 0x00, 0x00, 0x00, 0x60, 0x00,
  0x7F, 0xFF, 0xFF, 0xFF, 0xF8, 0x00, 0x00, 0x3F, 0xE3, 0x00, 0x00, 0x00, 0x00, 0x00, 0x60, 0x00,
  0x7F, 0xFF, 0xFF, 0xFF, 0xFC, 0x00, 0x00, 0x3F, 0xE3, 0x01, 0xF8, 0x1E, 0x0F, 0x07, 0xE0, 0x00,
  0x7F, 0xFF, 0xE7, 0xFF, 0xFC, 0x00, 0x00, 0x7F, 0xE3, 0xC1, 0xFC, 0x3F, 0x1F, 0x8F, 0xE0, 0x00,
  0x7F, 0xFF, 0xE7, 0xFF, 0xFE, 0x00, 0x00, 0x7F, 0xE1, 0xF1, 0x8E, 0x63, 0x31, 0x9C, 0x60, 0x00,
  0x7F, 0xFF, 0xC3, 0xFF, 0xFE, 0x00, 0x00, 0xFF, 0xE0, 0x79, 0x86, 0x7F, 0x3F, 0x98, 0x60, 0x00,
  0x7F, 0xFF, 0xC3, 0xFF, 0xFF, 0x00, 0x00, 0xFF, 0xE0, 0x19, 0x86, 0x60, 0x30, 0x18, 0x60, 0x00,
  0x7F, 0xFF, 0x81, 0xFF, 0xFF, 0x00, 0x01, 0xFF, 0xE0, 0x19, 0x8E, 0x72, 0x39, 0x1C, 0x60, 0x00,
  0x7F, 0xFF, 0x81, 0xFF, 0xFF, 0x80, 0x01, 0xFF, 0xE3, 0xF9, 0xFC, 0x3E, 0x1F, 0x0F, 0xE0, 0x00,
  0x7F, 0xFF, 0x00, 0xFF, 0xFF, 0x80, 0x03, 0xFF, 0xE3, 0xF1, 0xF8, 0x1C, 0x0E, 0x07, 0xE0, 0x00,
  0x7F, 0xFF, 0x00, 0xFF, 0xFF, 0xC0, 0x03, 0xFF, 0xE0, 0x01, 0x80, 0x00, 0x00, 0x00, 0x00, 0x00,
  0x7F, 0xFE, 0x00, 0x7F, 0xFF, 0xC0, 0x03, 0xFF, 0xE0, 0x01, 0x80, 0x00, 0x00, 0x00, 0x00, 0x00,
  0x7F, 0xFE, 0x00, 0x7F, 0xFF, 0xE0, 0x07, 0xFF, 0xE0, 0x01, 0x80, 0x00, 0x00, 0x00, 0x00, 0x00,
  0x7F, 0xFC, 0x00, 0x3F, 0xFF, 0xE0, 0x07, 0xFF, 0xE0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
  0x7F, 0xFC, 0x00, 0x3F, 0xFF, 0xF0, 0x0F, 0xFF, 0xE0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
  0x7F, 0xF8, 0x00, 0x1F, 0xFF, 0xF0, 0x0F, 0xFF, 0xE1, 0xE0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
  0x7F, 0xF8, 0x00, 0x1F, 0xFF, 0xF8, 0x1F, 0xFF, 0xE3, 0xE0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
  0x7F, 0xF8, 0x00, 0x0F, 0xFF, 0xF8, 0x1F, 0xFF, 0xE3, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
  0x7F, 0xF0, 0x00, 0x0F, 0xFF, 0xFC, 0x3F, 0xFF, 0xE3, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
  0x7F, 0xF0, 0x00, 0x07, 0xFF, 0xFC, 0x3F, 0xFF, 0xE3, 0xE3, 0xC3, 0xE0, 0x00, 0x00, 0x00, 0x00,
  0x7F, 0xE0, 0x00, 0x07, 0xFF, 0xFE, 0x7F, 0xFF, 0xE3, 0xE7, 0xE3, 0xE0, 0x00, 0x00, 0x00, 0x00,
  0x7F, 0xE0, 0x00, 0x03, 0xFF, 0xFE, 0x7F, 0xFF, 0xE3, 0x0E, 0x73, 0x00, 0x00, 0x00, 0x00, 0x00,
  0x7F, 0xC0, 0x00, 0x01, 0xFF, 0xFF, 0xFF, 0xFF, 0xE3, 0x0C, 0x33, 0x00, 0x00, 0x00, 0x00, 0x00,
  0x7F, 0xC0, 0x00, 0x01, 0xFF, 0xFF, 0xFF, 0xFF, 0xE3, 0x0C, 0x33, 0x00, 0x00, 0x00, 0x00, 0x00,
  0x7F, 0x80, 0x00, 0x00, 0xFF, 0xFF, 0xFF, 0xFF, 0xE3, 0x0E, 0x73, 0x00, 0x00, 0x00, 0x00, 0x00,
  0x7F, 0x80, 0x00, 0x00, 0xFF, 0xFF, 0xFF, 0xFF, 0xE3, 0x07, 0xE3, 0x00, 0x00, 0x00, 0x00, 0x00,
  0x7F, 0x00, 0x00, 0x00, 0x7F, 0xFF, 0xFF, 0xFF, 0xE3, 0x03, 0xC3, 0x00, 0x00, 0x00, 0x00, 0x00,
  0x7F, 0x00, 0x00, 0x00, 0x7F, 0xFF, 0xFF, 0xFF, 0xE0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
  0x7E, 0x00, 0x00, 0x00, 0x3F, 0xFF, 0xFF, 0xFF, 0xE0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
  0x7E, 0x00, 0x00, 0x00, 0x3F, 0xFF, 0xFF, 0xFF, 0xE0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
  0x7E, 0x00, 0x00, 0x00, 0x1F, 0xFF, 0xFF, 0xFF, 0xE0, 0x00, 0x00, 0x06, 0x00, 0x00, 0x00, 0x00,
  0x7C, 0x00, 0x00, 0x00, 0x1F, 0xFF, 0xFF, 0xFF, 0xE0, 0x70, 0x00, 0x06, 0x00, 0x30, 0x00, 0x00,
  0x7C, 0x00, 0x00, 0x00, 0x0F, 0xFF, 0xFF, 0xFF, 0xE0, 0x70, 0x00, 0x06, 0x00, 0x30, 0x00, 0x00,
  0x78, 0x00, 0x00, 0x00, 0x0F, 0xFF, 0xFF, 0xFF, 0xE0, 0xD8, 0x00, 0x06, 0x00, 0x00, 0x00, 0x00,
  0x78, 0x00, 0x00, 0x00, 0x07, 0xFF, 0xFF, 0xFF, 0xE0, 0xD8, 0x7C, 0x7E, 0x63, 0x33, 0xF0, 0x78,
  0x70, 0x00, 0x00, 0x00, 0x07, 0xFF, 0xFF, 0xFF, 0xE1, 0x8C, 0x7C, 0xFE, 0x63, 0x33, 0xF8, 0xFC,
  0x70, 0x00, 0x00, 0x00, 0x03, 0xFF, 0xFF, 0xFF, 0xE1, 0x8C, 0x61, 0xC6, 0x63, 0x33, 0x19, 0xCE,
  0x60, 0x00, 0x00, 0x00, 0x03, 0xFF, 0xFF, 0xFF, 0xE1, 0xFC, 0x61, 0x86, 0x63, 0x33, 0x19, 0x86,
  0x60, 0x00, 0x00, 0x00, 0x01, 0xFF, 0xFF, 0xFF, 0xE3, 0xFE, 0x61, 0x86, 0x63, 0x33, 0x19, 0x86,
  0x40, 0x00, 0x00, 0x00, 0x01, 0xFF, 0xFF, 0xFF, 0xE3, 0x06, 0x61, 0xC6, 0x63, 0x33, 0x19, 0xCE,
  0x40, 0x00, 0x00, 0x00, 0x00, 0xFF, 0xFF, 0xFF, 0xE6, 0x03, 0x60, 0xFE, 0x7F, 0x33, 0x18, 0xFC,
  0x00, 0x00, 0x00, 0x00, 0x00, 0xFF, 0xFF, 0xFF, 0xE6, 0x03, 0x60, 0x7E, 0x3F, 0x33, 0x18, 0x78,
  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00
};

void setup()  {
  //Sensor Input
  pinMode(SENSOR_L, INPUT_PULLUP);
  pinMode(SENSOR_R, INPUT_PULLUP);

  //Interface baud rate
  Serial.begin(9600);

  //Display
  initialize_display();
}

void loop()  {
  //waiting for signal, sensor Left
  if (digitalRead(SENSOR_L) == LOW)
  {
    //Sensor Left was activated, start time = system time (ms)
    starttime = millis();
    underprogress_display();
    //waiting for signal sensor Right
    while (digitalRead(SENSOR_R) == HIGH) {}

    //Measured time in ms
    deltatime = (millis() - starttime);

    refresh_display();
    freetime = 0;
    if (digitalRead(SENSOR_R) == LOW)
    {
      
      freetime = 0;  
      while (freetime < 20)
      {
        freetime++;
   
        if (digitalRead(SENSOR_R) == LOW)
        {
          freetime = 0;  //reset time with new occupation
        }
        delay (100);
     
      }
      delay (100);
    }
    
    state_ready_display();
  }


  //waiting for signal, sensor Right
  if (digitalRead(SENSOR_R) == LOW)
  {
    //Sensor Right was activated, start time = system time (ms)
    starttime = millis();
    underprogress_display();
    //waiting for signal sensor Left
    while (digitalRead(SENSOR_L) == HIGH) {}

    //Measured time in ms
    deltatime = (millis() - starttime);

    refresh_display();
    freetime = 0;
    if (digitalRead(SENSOR_L) == LOW)
    {
      
      freetime = 0; 
      while (freetime < 20)
      {
        freetime++;
        
        if (digitalRead(SENSOR_L) == LOW)
        {
          freetime = 0;  //reset time with new occupation
        }
        delay (100);
     
      }
      delay (100);
    }
    
    state_ready_display();
  }

} //End of loop


//Output on display
void refresh_display() {

  //Output on serial monitor
  Serial.println("Speedcheck running..");
  Serial.println("");
  Serial.println("Deltatime:");
  Serial.print(deltatime);
  Serial.println(" ms");
  Serial.println("---------");
  Serial.println("Speed:");
  Serial.print(distance / deltatime);
  Serial.println(" m/s (real)");
  Serial.print(scale * distance / deltatime * 3.6, 0);
  Serial.print(" km/h (scale 1/");
  Serial.print(scale);
  Serial.println(")");

  //Output on OLED
  display.clearDisplay();
  display.setTextSize(5);
  display.setCursor(0, 28);
  display.print(scale * distance / deltatime * 3.6, 0); //calculating speed in km/h
  display.setTextSize(1);
  display.setCursor(91, 56);
  display.print("km/h");
  display.setCursor(98, 28);
  display.print("1/");
  display.setCursor(110, 28);
  display.print(scale);
  display.drawFastHLine(0, 18, 128, WHITE);
  display.setTextSize(2);
  display.setCursor(0, 0);
  display.print(deltatime * 0.001);
  display.setTextSize(1);
  display.setCursor(50, 7);
  display.print("s");
  display.drawFastVLine(63, 0, 16, WHITE);
  display.setTextSize(2);
  display.setCursor(71, 00);
  display.print(distance / deltatime);
  display.setTextSize(1);
  display.setCursor(121, -2);
  display.print("m");
  display.drawFastHLine(121, 7, 5, WHITE);
  display.setCursor(121, 8);
  display.print("s");
  display.display();

  delay(waitingtime);


}

void state_ready_display() {

  display.clearDisplay();
  display.setTextSize(4);
  display.setCursor(5, 28);
  display.print("READY");
  display.drawFastHLine(0, 18, 128, WHITE);
  display.setTextSize(2);
  display.setCursor(37, 0);
  display.print("1/");
  display.setCursor(60, 0);
  display.print(scale);
  display.display();

  Serial.println("");
  Serial.println("<<< READY >>>");
}

void underprogress_display() {

  display.clearDisplay();
  display.setTextSize(2);
  display.setCursor(0, 20);
  display.println("");
  display.print(" running..");
  display.setTextSize(2);
  display.setCursor(5, 0);
  display.print("Speedcheck");
  display.display();
}

void initialize_display() {
  display.begin(SH1106_SWITCHCAPVCC, 0x3C); // initialize 1.3" OLED display (use adresse 0x3D for original Adafruit product)
  display.display();
  display.clearDisplay();
  display.drawBitmap(0, 0, logo, 128, 64, WHITE);
  display.display();
  display.setTextColor(INVERSE);

  delay(2500);

  display.clearDisplay();
  display.setTextSize(1);
  display.setCursor(0, 0);
  display.println("powered by");
  display.println("by Rainer Mandel");
  display.println("Zillbach");
  display.println("Version 1.4:");
  //display.print("by Bernhard Raschke");
  //display.display();

  delay(3000);

  display.clearDisplay();
  display.setTextSize(4);
  display.setCursor(5, 28);
  display.print("READY");
  display.drawFastHLine(0, 18, 128, WHITE);
  display.setTextSize(2);
  display.setCursor(37, 0);
  display.print("1/");
  display.setCursor(60, 0);
  display.print(scale);
  display.display();

  Serial.println("<<< READY >>>");
}

vgs

my_xy_projekt · December 23, 2023, 4:30pm

?

StefanL38 · December 23, 2023, 5:08pm

Ja direkt einfügen geht auch.

Das ist 1 zu 1 der Sketch den Rainer Maria Mandel in post # 30 gepostet hat.
Verwendet die Adafruit_SH1106.h statt wie im thread noch weiter oben post # 10.
Da wurde die Adafruit_SSD1306.h verwendet.

Rainer Maria Wandel - äh - Mandel
Was für ein Display hast du denn nun?
Oder möchtest du alle Sketche aus der MobaSpeed-Sammlung durchprobieren?

vgs

my_xy_projekt · December 23, 2023, 5:09pm

Ok - dann ist da schon die Variable falsch definiert.
Die läuft nach 25 Tagen über. Mit entsprechenden Folgen, da millis() dann noch 25 Tage weiter läuft.

martinamandel · December 23, 2023, 5:57pm

RBS11084 1.3" OLED Display I2C/IIC/TWI 128x64 Pixel für Arduino vonFirma Roboterbausatz.

StefanL38 · December 23, 2023, 6:04pm

Jaaaaa. Und was hat das Display für einen Treiber?

SH1106?
SD1306?
?
-?
da musste jetzt noch mal auf die Seite von RobotorIstBlauUndMachtNenSatz
und das dort nachschauen oder wenigstens einen Link posten

my_xy_projekt · December 23, 2023, 6:06pm

Quelle

Topic		Replies	Views
An error that I can't identify and correct Programming	18	617	January 13, 2024
Kann einen Nano nicht neu programieren Deutsch	14	337	January 1, 2026
Arduino not uploading sketches anymore but still runs previous code help! Classic Nano	8	223	August 24, 2025
Arduino Nano Every will nicht hochladen Deutsch	79	981	May 17, 2026
Nano-Clone mit SH1106 OLED hängt im setup fest Deutsch	72	1429	July 31, 2024

Aduino Nano Fehler beim compilieren

Related topics