# Air pressure display

**URL:** <https://forum.arduino.cc/t/air-pressure-display/1182271>\
**Category:** Science and Measurement\
**Created:** [October 25, 2023, 9:40pm UTC](https://forum.arduino.cc/t/air-pressure-display/1182271 "2023-10-25T21:40:20Z")\
**Posts on this page:** 10\
**Page:** 1

<div class="post-metadata">

**Author:** ![drchops](https://avatars.discourse-cdn.com/v4/letter/d/278dde/32.png) [@drchops](https://forum.arduino.cc/u/drchops)\
**Post date:** [October 25, 2023, 9:40pm UTC](https://forum.arduino.cc/t/air-pressure-display/1182271/1 "2023-10-25T21:40:20Z")

</div>

hi all

ive got an idea but im unsure how to go about it. i want to read air pressure and then display it on a oled screen.

im unsure where to start if someone has a suggestion or can point me in the right direction that would much appreciated

cheers  
lucas

---

<div class="post-metadata">

**Author:** ![anon94801460](https://avatars.discourse-cdn.com/v4/letter/a/278dde/32.png) [@anon94801460](https://forum.arduino.cc/u/anon94801460)\
**Post date:** [October 25, 2023, 10:39pm UTC](https://forum.arduino.cc/t/air-pressure-display/1182271/2 "2023-10-25T22:39:03Z")

</div>

Very straightforward. What Arduino, screen and sensor do you have, and what have you done so far?

---

<div class="post-metadata">

**Author:** ![Ron\_Blain](https://dub1.discourse-cdn.com/arduino/user_avatar/forum.arduino.cc/ron_blain/32/1126393_2.png) [@Ron\_Blain](https://forum.arduino.cc/u/Ron_Blain)\
**Post date:** [October 25, 2023, 11:15pm UTC](https://forum.arduino.cc/t/air-pressure-display/1182271/3 "2023-10-25T23:15:43Z")

</div>

> [@drchops](#):
>
> ive got an idea but im unsure how to go about it. i want to read air pressure and then display it on a oled screen.

Should be easy enough. However less answers to:

> [@anon94801460](#):
>
> Very straightforward. What Arduino, screen and sensor do you have, and what have you done so far?

Those questions need answered. How much air pressure? That determines your sensor. Which Arduino determines to some extent the needed code. This will go much, much better if you provide more information.

Ron

---

<div class="post-metadata">

**Author:** ![drchops](https://avatars.discourse-cdn.com/v4/letter/d/278dde/32.png) [@drchops](https://forum.arduino.cc/u/drchops)\
**Post date:** [October 26, 2023, 1:09am UTC](https://forum.arduino.cc/t/air-pressure-display/1182271/4 "2023-10-26T01:09:11Z")

</div>

hi jremington

i have a uno wifi board and nothing else the pressure will range between 0-200psi as for the screen im not sure, are there better ones to look out for?

cheers  
lucas

---

<div class="post-metadata">

**Author:** ![anon94801460](https://avatars.discourse-cdn.com/v4/letter/a/278dde/32.png) [@anon94801460](https://forum.arduino.cc/u/anon94801460)\
**Post date:** [October 26, 2023, 1:25am UTC](https://forum.arduino.cc/t/air-pressure-display/1182271/5 "2023-10-26T01:25:13Z")

</div>

The first step is to get a pressure sensor and learn how to use it, with output on the serial monitor. There are plenty of tutorials on line.

Any screen will work to display numerical values, but if you want to make a graph, a small TFT display is fine (128x64 will work with the Uno). Adafruit sells several varieties.

---

<div class="post-metadata">

**Author:** ![drchops](https://avatars.discourse-cdn.com/v4/letter/d/278dde/32.png) [@drchops](https://forum.arduino.cc/u/drchops)\
**Post date:** [October 26, 2023, 1:59am UTC](https://forum.arduino.cc/t/air-pressure-display/1182271/6 "2023-10-26T01:59:24Z")

</div>

awesome thanks jremington

---

<div class="post-metadata">

**Author:** ![anon94801460](https://avatars.discourse-cdn.com/v4/letter/a/278dde/32.png) [@anon94801460](https://forum.arduino.cc/u/anon94801460)\
**Post date:** [October 26, 2023, 2:10am UTC](https://forum.arduino.cc/t/air-pressure-display/1182271/7 "2023-10-26T02:10:22Z")

</div>

Here is a tutorial for an I2C air pressure sensor (normally, I recommend to avoid Instructables, but this one is OK): [https://www.instructables.com/M3200-Pressure-Transducer-Arduino/](https://www.instructables.com/M3200-Pressure-Transducer-Arduino/)

There are many posts discussing how to read analog (0.5 to 4.5V) pressure sensors on this forum.

---

<div class="post-metadata">

**Author:** ![drchops](https://avatars.discourse-cdn.com/v4/letter/d/278dde/32.png) [@drchops](https://forum.arduino.cc/u/drchops)\
**Post date:** [October 26, 2023, 3:07am UTC](https://forum.arduino.cc/t/air-pressure-display/1182271/8 "2023-10-26T03:07:12Z")

</div>

fantasic thanks for your help mate. is there a way that you could display say 4 readings on one screen?

cheers'  
lucas

---

<div class="post-metadata">

**Author:** ![Ron\_Blain](https://dub1.discourse-cdn.com/arduino/user_avatar/forum.arduino.cc/ron_blain/32/1126393_2.png) [@Ron\_Blain](https://forum.arduino.cc/u/Ron_Blain)\
**Post date:** [October 26, 2023, 11:43pm UTC](https://forum.arduino.cc/t/air-pressure-display/1182271/9 "2023-10-26T23:43:46Z")

</div>

> [@drchops](#):
>
> is there a way that you could display say 4 readings on one screen?

Never used an OLED display as of yet but if all you want is 4 rows and 20 columns is enough I have used plenty of LCD displays.

 ![DHT 22 1](https://europe1.discourse-cdn.com/arduino/original/4X/0/9/3/0933f9dd19b9af1ce7080acb98bc3deee160ef67.png)  
In the above I only use 3 of 4 rows. When choosing a LCD screen [I like the ones with the SDA and SCL lines](https://www.amazon.com/SunFounder-Serial-Module-Arduino-Mega2560/dp/B01GPUMP9C/ref=asc_df_B01GPUMP9C/?tag=hyprod-20&linkCode=df0&hvadid=309777534894&hvpos=&hvnetw=g&hvrand=4192598482421849972&hvpone=&hvptwo=&hvqmt=&hvdev=c&hvdvcmdl=&hvlocint=&hvlocphy=9015336&hvtargid=pla-572925702212&psc=1&tag=&ref=&adgrpid=58425267301&hvpone=&hvptwo=&hvadid=309777534894&hvpos=&hvnetw=g&hvrand=4192598482421849972&hvqmt=&hvdev=c&hvdvcmdl=&hvlocint=&hvlocphy=9015336&hvtargid=pla-572925702212). I am sure the same can be done with a OLED display.

Ron

---

<div class="post-metadata">

**Author:** ![system](https://dub1.discourse-cdn.com/arduino/user_avatar/forum.arduino.cc/system/32/1140315_2.png) [@system](https://forum.arduino.cc/u/system)\
**Post date:** [April 23, 2024, 11:44pm UTC](https://forum.arduino.cc/t/air-pressure-display/1182271/10 "2024-04-23T23:44:11Z")

</div>

Closed on April 23, 2024, 11:44pm UTC

This topic was automatically closed 180 days after the last reply. New replies are no longer allowed.
