alimentare servo argano direttamente da arduino

Control System: +Pulse Width Control 1500usec Neutral
Required Pulse: 3-5 Volt Peak to Peak Square Wave
Operating Voltage: 4.8-6.0 Volts
Operating Temperature Range: -20 to +60 Degree C
Operating Speed (4.8V): 1.68sec/360° at no load
Operating Speed (6.0V): 1.4sec/360° at no load
Stall Torque (4.8V): 152.75 oz/in. (11kg.cm)
Stall Torque (6.0V): 183 oz/in. (13.2kg.cm)
Operating Angle: 630 Deg. one side pulse traveling 400usec
360 Modifiable: Yes
Direction: Clockwise/Pulse Traveling 1500 to 1900usec
Current Drain (4.8V): 8mA/idle and 230mA no load operating
Current Drain (6.0V): 8.7mA/idle and 285mA no load operating
Dead Band Width: 8usec
Motor Type: 3 Pole Ferrite
Potentiometer Drive: Indirect Drive
Bearing Type: 1 Bearing and 1 Oilite Bushing
Gear Type: All Karbonite Gear
Connector Wire Length: 11.81" (300mm)
Dimensions: 2.32" x 1.14"x 1.96" (59 x 29 x 50mm)
Weight: 3.88 oz.. (110g)