AMS AS5048B I2c Adapter board I2C Erro

Other Hardware Sensors
6

Thanks Pylon This now appears to be working perfectly.

As suggested I have connected The A1 and A2 (MOSI, MISO) pins of the AS5048B board to GND on the teensy and this appears to have resolved the problem.

For anyone else scratching their head with this here is the wiring diagram that worked for me, it should work for all other Arduino based boards with whichever native SCL and SDA pins used,

I've just tried this with a Wemos D1 R2 and it works with SCL and SDA pin used as D15 and D14 respectively and it's working perfectly.

Thanks again Pylon and I hope this helps someone else

Cheers All!

AM5048BSOSANDROIDWIRINGDIAGRAM
AM5048BSOSANDROIDWIRINGDIAGRAM2468×2372 512 KB

Edit: Image updated to show 3.3V for Teensy 4.1