An error occurred while uploading the sketch

#include <SoftwareSerial.h>
#include <Servo.h>

Servo myServo;
Servo myServo1;
Servo myServo2;
int TxD = 10;
int RxD = 9;
int servoposition;
int servopos;

SoftwareSerial bluetooth(TxD, RxD);

void setup() {
  int pos = 0;
  myServo.attach(3);
  myServo1.attach(5);
  myServo2.attach(6);
  myServo.write(150);
  myServo1.write(0);
  Serial.begin(9600);       // start serial communication at 9600bps
  bluetooth.begin(9600);
}

void loop() {
  if (bluetooth.available())
  {
    String value = bluetooth.readString();
    servoposition = value.toInt();

    if (value.toInt() == 0)
    {
      Serial.println(servoposition);
      myServo.write(0);
    }

    if (value.toInt() == 2)
    {
      Serial.println(servoposition);
      myServo.write(150);
      myServo1.write(180);
      myServo2.write(180);

    }

    if (value.toInt() == 3)
    {
      Serial.println(servoposition);
      myServo.write(0);
      myServo1.write(0);
      myServo2.write(0);

    }



  }



}

I have got an error
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 1 of 10: not in sync: resp=0xfc
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 2 of 10: not in sync: resp=0xfc
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 3 of 10: not in sync: resp=0xfc
Karta yüklenirken sorun oluştu. Tavsiyeler için http://www.arduino.cc/en/Guide/Troubleshooting#upload adresine göz atabilirsiniz.
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 4 of 10: not in sync: resp=0xfc
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 5 of 10: not in sync: resp=0xfc
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 6 of 10: not in sync: resp=0xfc
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 7 of 10: not in sync: resp=0xfc
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 8 of 10: not in sync: resp=0xfc
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 9 of 10: not in sync: resp=0xfc
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 10 of 10: not in sync: resp=0xfc
please help me.

(deleted)

@spycatcher2k I have got Arduino Uno clone. It was working yesterday but now it gives error. Windows 10 Pro.

(deleted)