so in the first diagram..
that is 'faulty'?... and will not work as is? or just be 'slower' (slower for what? to power up?)
but if I need to make changes and re-order...I'd guess I'll have to do that.
Should I just mimic the layout/schematic like in the second image then?...
This forum is totally screwing up lately - I wrote a long post, and it ate it. Short form,
- the 2nd image is what you normally see.
- you always need both electrolytic and bypass caps on the Vcc buss, although a bypass on the uC
Vcc pins will probably be adequate if not too far from the v.reg. - if the electrolytics are too large, Vcc may come up slowly, and the uC may not boot properly,
but you'll probably not have that problem with values of 1..22 uF.