Archive of Eagle files for Uno Revision 3 is corrupted

The zip file containing the board design for the new release is (ostensibly,per the product page: http://arduino.cc/en/Main/ArduinoBoardUno) here:

http://arduino.cc/en/uploads/Main/arduino_Uno_Rev3-02-TH.zip

Attempting to extract this file results in:

$ unzip arduino_Uno_Rev3-02-TH.zip 
Archive:  arduino_Uno_Rev3-02-TH.zip
  End-of-central-directory signature not found.  Either this file is not
  a zipfile, or it constitutes one disk of a multi-part archive.  In the
  latter case the central directory and zipfile comment will be found on
  the last disk(s) of this archive.

Additional info that may be helpful:

$ md5 arduino_Uno_Rev3-02-TH.zip 
MD5 (arduino_Uno_Rev3-02-TH.zip) = b0c4221f3989c5331be5798c7428d5f9
$ du -h arduino_Uno_Rev3-02-TH.zip 
144K	arduino_Uno_Rev3-02-TH.zip

Please fix this! Thank you.

I can confirm that this is indeed the case. The ZIP file is truncated. While it is possible to recover the .sch file from the shortened ZIP file, the .brd file is not fully recoverable.

Website admins - please upload a new copy of the file ASAP so we can oggle at the new designs.

11 days since this was reported (and tweeted), and nothing. :-(