Arduino: 1.6.2 (Windows 8.1), Board: "Arduino Uno" Sketch uses 4.716 bytes (14%

Arduino: 1.6.2 (Windows 8.1), Board: "Arduino Uno"

Sketch uses 4.716 bytes (14%) of program storage space. Maximum is 32.256 bytes.

Global variables use 200 bytes (9%) of dynamic memory, leaving 1.848 bytes for local variables. Maximum is 2.048 bytes.

avrdude: stk500_recv(): programmer is not responding

avrdude: stk500_getsync() attempt 1 of 10: not in sync: resp=0xba

avrdude: stk500_recv(): programmer is not responding

avrdude: stk500_getsync() attempt 2 of 10: not in sync: resp=0xba

avrdude: stk500_recv(): programmer is not responding

Problem uploading to board. See http://www.arduino.cc/en/Guide/Troubleshooting#upload for suggestions.

avrdude: stk500_getsync() attempt 3 of 10: not in sync: resp=0xba

avrdude: stk500_recv(): programmer is not responding

avrdude: stk500_getsync() attempt 4 of 10: not in sync: resp=0xba

avrdude: stk500_recv(): programmer is not responding

avrdude: stk500_getsync() attempt 5 of 10: not in sync: resp=0xba

avrdude: stk500_recv(): programmer is not responding

avrdude: stk500_getsync() attempt 6 of 10: not in sync: resp=0xba

avrdude: stk500_recv(): programmer is not responding

avrdude: stk500_getsync() attempt 7 of 10: not in sync: resp=0xba

avrdude: stk500_recv(): programmer is not responding

avrdude: stk500_getsync() attempt 8 of 10: not in sync: resp=0xba

avrdude: stk500_recv(): programmer is not responding

avrdude: stk500_getsync() attempt 9 of 10: not in sync: resp=0xba

avrdude: stk500_recv(): programmer is not responding

avrdude: stk500_getsync() attempt 10 of 10: not in sync: resp=0xba

This report would have more information with "Show verbose output during compilation" enabled in File > Preferences.

i just take my arduino uno board and i have this problem!my code is ok! can anyone help?please!

See http://www.arduino.cc/en/Guide/Troubleshooting#upload for suggestions.

lol i did!! can you help me with other ways?

OK. What, exactly, do the RX and TX lights do when you reset the Arduino and when you initiate the upload?