Hey! Somewhat inexperienced when it comes to coding but i can work my way around most stuff. I just want to get output from this MS5607 module. I tried using the I2C scanner from the arduino playground (Arduino Playground - I2cScanner) and used the example code from the MS5607 library (GitHub - Schm1tz1/arduino-ms5xxx: Arduino Library with examples for using digital pressure sensors MS5607 (and MS56xx, MS57xx, MS58xx) based on AN520 by manufacturer.). Both of them couldnt detect the module. What do you guys think the error is?
My connection with the module and the Arduino 101 board (respectively) is as follows:
Altimeter: Arduino 101:
VIN 3.3V (also tried 5V, MS5607 can use from 3.3V to 6.5V. Current draw is below 20 mA)
GND GND
SDA SDA (Also tried SCL, and A4/A5)
SCL SCL (Also tried SDA, and A4/A5)
What else can I try? I'll also connect this to my Arduino Uno board later today and see if it's maybe a problem with my board, or the module. I have another I2C sensor at my house as well, I'll see if i can detect that as well.