Arduino Create Failure - Upsquared grove Development kit

Development Tools Cloud Editor
1

Hi,

I have been trying to Arduino create Up2 board grove development KIT , but was stuck at create step as it kept on failing although all my connections were intact. (Error : We were not able to establish a connection between the Arduino Create and your UP2 Board) - Couldn't find any solution !!

As a workaround, I was able to Arduino create for "Generic Linux Platforms" for my Up2 board and succesfully added the device. :slight_smile: I wanted to start a sample blink application, but I am unable to do so for Upsquared Grove Development Kit.

My query is that do I need to Arduino create Up2 board grove development Kit specifically to run blink application on Up2 or my approach of creating device as Generic Linux Platforms is fine? If so, how do I run and where do I find a simple application to get started?

Thanks

2

Are you running the CREATE "IDE" agent or the "CLOUD" function.
Whilst linked they are two seperate items.

One is an actual IDE and the other is meant for IOT usage.

I dont have a UP2 as I consider them too expensive.
My usage for both IDE and IOT is limited to the MKR series boards.

Bob.