Arduino data upload to Xymon server

Hi,

I have the desire to have existing DS18B20 temp sensors, see link below, to be graphed on my existing Xymon server(see below).

Currently the DS18B20 temp sensors post their temp to a MQTT Mosquitto server(see below) & for now that's as far as it goes, the plan was to have it posted onto a local web page however this is proving to be above me for now.

In the mean time I set up the Xymon server on my local home network & it has very nice graphs(see below) so my idea is to have the house temperatures graphed as well & if this works out more sensors in the future.

The Xymon server has a means of setting up custom graphs by using (Name-Colon-Value), see below.

Question

Is it possible to set up what I'm after? if so are there any examples about I can use as a guide, if no examples is anyone willing to help or should I forget it & move forward with the MQTT web page?.

Thanks for looking.

Steve...

Links
DS18B20 temp sensors Temperature Sensor Module | Freetronics
Xymon Server http://xymon.sourceforge.net/
Xymon Graphs http://www.xymon.com/xymon-cgi/svcstatus.sh?HOST=blixen.hswn.dk&SERVICE=trends
MQTT http://mqtt.org/
Mosquitto http://mosquitto.org/
Xymon custom graphs http://www.xymon.com/xymon/help/howtograph.html

Although this is in the meantime a very old thread, for those who are interested: the answer to the question is yes. I have done so recently, using an ATmega2560 with a W5100 Ethernet shield.

Although this is in the meantime a very old thread, for those who are interested: the answer to the question is yes. I have done so recently, using an ATmega2560 with a W5100 Ethernet shield.