Hello.
I have this device
I tried with TinyGps library but it doesn't work.
Anybody has a good library for it?
Many thanks
Hmmm... how is it hooked up? Are you getting any data? What Arduino? Serial or SoftSerial? Baud rate?
TinyGPS has been around for quite a while, so it's probably not the problem. We'll need more info to help you.
Cheers,
/dev
I have used this with tinygps
Its a fairly standard GPS
Its default baud rate in 9600
Make sure you cross the tx / rx i.e.
Arduino Tx to GPS RX
RX to GPS TX
Also don't forget to link the grounds...
thanks to all
i used tinygps at 9600 baud rate
i have correct link rx and tx and ground
i received
Simple TinyGPS library v. 12
by Mikal Hart
0
GPS not available0
$GPGGA,000125.003,,,,,0,0,,,M,,M,,4D
$GPGSA,A,1,,,,,,,,,,,,,,,1E
$GPGSV,1,1,0079
$GPRMC,000125.003,V,,,,,0.00,0.00,060180,,,N47
CHARS=136 SENTENCES=0 CSUM ERR=0
0
GPS not available0
$GPGGA,000126.003,,,,,0,0,,,M,,M,,4E
$GPGSA,A,1,,,,,,,,,,,,,,,1E
$GPGSV,1,1,0079
$GPRMC,000126.003,V,,,,,0.00,0.00,060180,,,N44
CHARS=272 SENTENCES=0 CSUM ERR=0
0
GPS not available0
$GPGGA,000127.003,,,,,0,0,,,M,,M,,4F
$GPGSA,A,1,,,,,,,,,,,,,,,1E
$GPGSV,1,1,0079
$GPRMC,000127.003,V,,,,,0.00,0.00,060180,,,N45
CHARS=408 SENTENCES=0 CSUM ERR=0
0
From this information,
$GPGGA,000127.003,,,,,0,0,,,M,,M,,*4F
$GPGSA,A,1,,,,,,,,,,,,,,,*1E
$GPGSV,1,1,00*79
$GPRMC,000127.003,V,,,,,0.00,0.00,060180,,,N*45
I'd say it's not getting a fix. It thinks the date is June 1, 1980, so it hasn't received any signal from any GPS satellite. It should get the correct time before it gets a location.
Does the ceramic antenna look ok? Is the antenna cable fully secured? Have you tried it outside? It may take 10-20 minutes for the first fix.
Cheers,
/dev
thanks again
i tried outside but only for 1 minute
did you said 10-20 minutes? maybe secconds , i think is too long 10-20 minutes to get some data from sattelite
many thanks again.
Yes, 10 - 20 minutes to get a first time fix. After that it should be quicker.