# Arduino IDE 2.3.1 crashes ESP8266 **URL:** \ **Category:** IDE 2.x\ **Created:** [February 19, 2024, 1:37pm UTC](https://forum.arduino.cc/t/arduino-ide-2-3-1-crashes-esp8266/1225801 "2024-02-19T13:37:27Z")\ **Posts on this page:** 16\ **Page:** 1
**Author:** ![Sachig](https://avatars.discourse-cdn.com/v4/letter/s/3be4f8/32.png) [@Sachig](https://forum.arduino.cc/u/Sachig)\ **Post date:** [February 19, 2024, 1:37pm UTC](https://forum.arduino.cc/t/arduino-ide-2-3-1-crashes-esp8266/1225801/1 "2024-02-19T13:37:27Z")
Hi, after upgrading to IDE 2.3.1, the ESP8266 code (NodeMCU 1.0) crashes. In previous version (IDE 2.2.1) it run perfectly. Any ideas? How can I roll back to previous IDE? ---
**Author:** ![UKHeliBob](https://dub1.discourse-cdn.com/arduino/user_avatar/forum.arduino.cc/ukhelibob/32/215663_2.png) [@UKHeliBob](https://forum.arduino.cc/u/UKHeliBob)\ **Post date:** [February 19, 2024, 2:22pm UTC](https://forum.arduino.cc/t/arduino-ide-2-3-1-crashes-esp8266/1225801/2 "2024-02-19T14:22:21Z")
Welcome to the forum What happens when the code crashes ? What messages are printed, if any ? ---
**Author:** ![Sachig](https://avatars.discourse-cdn.com/v4/letter/s/3be4f8/32.png) [@Sachig](https://forum.arduino.cc/u/Sachig)\ **Post date:** [February 19, 2024, 3:41pm UTC](https://forum.arduino.cc/t/arduino-ide-2-3-1-crashes-esp8266/1225801/3 "2024-02-19T15:41:18Z")
Thank you! The code start its task connects to WiFi, then: --------------- CUT HERE FOR EXCEPTION DECODER --------------- Exception (3): epc1=0x40206917 epc2=0x00000000 epc3=0x00000000 excvaddr=0x4025c402 depc=0x00000000 > > > stack\>\>\> ctx: cont sp: 3ffffe40 end: 3fffffd0 offset: 0150 3fffff90: 4025d0a1 00000000 0000000c 40100684 3fffffa0: 3fffdad0 00000000 3fff13c4 3fff13f0 3fffffb0: 3fffdad0 00000000 3fff13c4 4021db48 3fffffc0: feefeffe feefeffe 3fffdab0 401011d5 \<\<\ **Author:** ![sterretje](https://dub1.discourse-cdn.com/arduino/user_avatar/forum.arduino.cc/sterretje/32/391294_2.png) [@sterretje](https://forum.arduino.cc/u/sterretje)\ **Post date:** [February 19, 2024, 3:54pm UTC](https://forum.arduino.cc/t/arduino-ide-2-3-1-crashes-esp8266/1225801/4 "2024-02-19T15:54:12Z") Did you do a fresh install of the IDE when updating? Or did you update from within the IDE when it offered you to update? Did you update (or had to re-install) any board packages or libraries? ---
**Author:** ![Sachig](https://avatars.discourse-cdn.com/v4/letter/s/3be4f8/32.png) [@Sachig](https://forum.arduino.cc/u/Sachig)\ **Post date:** [February 19, 2024, 3:58pm UTC](https://forum.arduino.cc/t/arduino-ide-2-3-1-crashes-esp8266/1225801/5 "2024-02-19T15:58:27Z")
1. I did an upgrade when offered 2. I checked and the board packages where present. I did not reinstall any 3. The upgrade changed some of the parameters, like MMU configuration. I reset those before compiling ---
**Author:** ![Sachig](https://avatars.discourse-cdn.com/v4/letter/s/3be4f8/32.png) [@Sachig](https://forum.arduino.cc/u/Sachig)\ **Post date:** [February 19, 2024, 4:01pm UTC](https://forum.arduino.cc/t/arduino-ide-2-3-1-crashes-esp8266/1225801/6 "2024-02-19T16:01:15Z")
PS I know that the code works on IDE 2.2.1 as I upgraded my desktop and not yet (luckyly) my laptop ---
**Author:** ![ptillisch](https://avatars.discourse-cdn.com/v4/letter/p/ad7895/32.png) [@ptillisch](https://forum.arduino.cc/u/ptillisch)\ **Post date:** [February 19, 2024, 4:18pm UTC](https://forum.arduino.cc/t/arduino-ide-2-3-1-crashes-esp8266/1225801/7 "2024-02-19T16:18:32Z")
Hi @Sachig. I'm going to ask you to provide the compilation output you get from compiling the same troubled sketch code using the non-working Arduino IDE 2.3.1 installation and the working Arduino IDE 2.2.1 installation. * * * ❗ This procedure is not intended to solve the problem. The purpose is to gather more information. * * * Please do this: ## A. Get output from Arduino IDE 2.3.1 1. Select **File \> Preferences...** (or **Arduino IDE \> Settings...** for macOS users) from the Arduino IDE menus. The " **Preferences**" dialog will open. 2. Check the box next to " **Show verbose output during: ☐ compilation**" in the " **Preferences**" dialog. 3. Click the " **OK**" button. 4. Select **Sketch \> Verify/Compile** from the Arduino IDE menus. 5. Wait for the compilation to fail. 6. You will see a " **Compilation error: ...**" notification at the bottom right corner of the Arduino IDE window. Click the " **COPY ERROR MESSAGES**" button on that notification. 7. Open a forum reply here by clicking the " **Reply**" button. 8. Click the **``** icon on the post composer toolbar. This will add the forum's code block markup ( **`````** ) to your reply to make sure the error messages are correctly formatted. ![Code block icon on toolbar](https://europe1.discourse-cdn.com/arduino/original/4X/f/3/4/f34b0ef2ecd107da4bf127b3c0bc1c28569e7fe0.png) 9. Press the **Ctrl** + **V** keyboard shortcut ( **Command** + **V** for macOS users). This will [paste](https://lifehacker.com/how-to-copy-cut-and-paste-for-beginners-5801525) the compilation output into the code block. 10. Move the cursor outside of the code block markup before you add any additional text to your reply. 11. Click the " **Reply**" button to post the output. ## B. Get output from Arduino IDE 2.2.1 1. Select **File \> Preferences...** (or **Arduino IDE \> Settings...** for macOS users) from the Arduino IDE menus. The " **Preferences**" dialog will open. 2. Check the box next to " **Show verbose output during: ☐ compilation**" in the " **Preferences**" dialog. 3. Click the " **OK**" button. 4. Select **Sketch \> Verify/Compile** from the Arduino IDE menus. 5. Wait for the compilation to finish. 6. Right click on the black " **Output**" panel at the bottom of the Arduino IDE window. 7. From the context menu, click **Copy All**. 8. Open a forum reply here by clicking the " **Reply**" button. 9. Click the **``** icon on the post composer toolbar. This will add the forum's code block markup ( **`````** ) to your reply to make sure the error messages are correctly formatted. ![Code block icon on toolbar](https://europe1.discourse-cdn.com/arduino/original/4X/f/3/4/f34b0ef2ecd107da4bf127b3c0bc1c28569e7fe0.png) 10. Press the **Ctrl** + **V** keyboard shortcut ( **Command** + **V** for macOS users). This will [paste](https://lifehacker.com/how-to-copy-cut-and-paste-for-beginners-5801525) the compilation output into the code block. 11. Move the cursor outside of the code block markup before you add any additional text to your reply. 12. Click the " **Reply**" button to post the output. * * * In case the output is longer than the forum software will allow to be added to a post, you can instead save it to a `.txt` file and then attach that file to a reply here: 1. Open any text editor program. 2. [Paste](https://lifehacker.com/how-to-copy-cut-and-paste-for-beginners-5801525) the copied output into the text editor. 3. Save the file in `.txt` format. 4. Open a forum reply here by clicking the " **Reply**" button. 5. Click the "Upload" icon ( ![image](https://europe1.discourse-cdn.com/arduino/original/4X/c/0/0/c0067471d5eb440267189d84a0c94cfed541a968.png)) on the post composer toolbar: ![Upload icon on toolbar](https://europe1.discourse-cdn.com/arduino/original/4X/3/0/1/30174157d368457aa9e1c9f5fb673d691a6e1516.png) The " **Open**" dialog will open. 6. Select the `.txt` file you saved from the " **Open**" dialog. 7. Click the " **Open**" button. The dialog will close. 8. Click the " **Reply**" button to publish the post. Alternatively, instead of using the "Upload" icon on the post composer toolbar as described in steps (5) - (7) above, you can simply drag and drop the `.txt` file onto the post composer field to attach it. ---
**Author:** ![Sachig](https://avatars.discourse-cdn.com/v4/letter/s/3be4f8/32.png) [@Sachig](https://forum.arduino.cc/u/Sachig)\ **Post date:** [February 19, 2024, 4:36pm UTC](https://forum.arduino.cc/t/arduino-ide-2-3-1-crashes-esp8266/1225801/8 "2024-02-19T16:36:54Z")
There is no error on the compilation and the code is uploaded to the ESP8266. It crashes when it runs ---
**Author:** ![Sachig](https://avatars.discourse-cdn.com/v4/letter/s/3be4f8/32.png) [@Sachig](https://forum.arduino.cc/u/Sachig)\ **Post date:** [February 19, 2024, 4:38pm UTC](https://forum.arduino.cc/t/arduino-ide-2-3-1-crashes-esp8266/1225801/9 "2024-02-19T16:38:18Z")
```arduino FQBN: esp8266:esp8266:nodemcuv2:mmu=3216 Using board 'nodemcuv2' from platform in folder: C:\Users\user\AppData\Local\Arduino15\packages\esp8266\hardware\esp8266\3.1.2 Using core 'esp8266' from platform in folder: C:\Users\user\AppData\Local\Arduino15\packages\esp8266\hardware\esp8266\3.1.2 "C:\\Users\\user\\AppData\\Local\\Arduino15\\packages\\esp8266\\tools\\python3\\3.7.2-post1/python3" -I "C:\\Users\\user\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\3.1.2/tools/mkbuildoptglobals.py" "C:\\Program Files\\Arduino IDE\\resources\\app\\lib\\backend\\resources" 10607 "C:\\Users\\user\\AppData\\Local\\Temp\\arduino\\sketches\\1A8A66D807C31ADBD86A6E79CF20C097" "C:\\Users\\user\\AppData\\Local\\Temp\\arduino\\sketches\\1A8A66D807C31ADBD86A6E79CF20C097/core/build.opt" "C:\\Users\\user\\OneDrive\\One-Documents\\4-Arduino\\3 - Shades\\Smart_Pinnes_Home_V9/Smart_Pinnes_Home_V9.ino.globals.h" "C:\\Users\\user\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\3.1.2\\cores\\esp8266/CommonHFile.h" default_encoding: cp1255 Assume aggressive 'core.a' caching enabled. Note: optional global include file 'C:\Users\user\OneDrive\One-Documents\4-Arduino\3 - Shades\Smart_Pinnes_Home_V9\Smart_Pinnes_Home_V9.ino.globals.h' does not exist. Read more at https://arduino-esp8266.readthedocs.io/en/latest/faq/a06-global-build-options.html Detecting libraries used... C:\Users\user\AppData\Local\Arduino15\packages\esp8266\tools\xtensa-lx106-elf-gcc\3.1.0-gcc10.3-e5f9fec/bin/xtensa-lx106-elf-g++ -D __ets__ -DICACHE_FLASH -U __STRICT_ANSI__ -D_GNU_SOURCE -DESP8266 @C:\Users\user\AppData\Local\Temp\arduino\sketches\1A8A66D807C31ADBD86A6E79CF20C097/core/build.opt -IC:\Users\user\AppData\Local\Arduino15\packages\esp8266\hardware\esp8266\3.1.2/tools/sdk/include -IC:\Users\user\AppData\Local\Arduino15\packages\esp8266\hardware\esp8266\3.1.2/tools/sdk/lwip2/include -IC:\Users\user\AppData\Local\Arduino15\packages\esp8266\hardware\esp8266\3.1.2/tools/sdk/libc/xtensa-lx106-elf/include -IC:\Users\user\AppData\Local\Temp\arduino\sketches\1A8A66D807C31ADBD86A6E79CF20C097/core -c @C:\Users\user\AppData\Local\Arduino15\packages\esp8266\hardware\esp8266\3.1.2/tools/warnings/none-cppflags -Os -g -free -fipa-pta -Werror=return-type -mlongcalls -mtext-section-literals -fno-rtti -falign-functions=4 -std=gnu++17 -ffunction-sections -fdata-sections -fno-exceptions -DMMU_IRAM_SIZE=0x8000 -DMMU_ICACHE_SIZE=0x4000 -DMMU_SEC_HEAP=0x40108000 -DMMU_SEC_HEAP_SIZE=0x4000 -w -x c++ -E -CC -DNONOSDK22x_190703=1 -DF_CPU=80000000L -DLWIP_OPEN_SRC -DTCP_MSS=536 -DLWIP_FEATURES=1 -DLWIP_IPV6=0 -DARDUINO=10607 -DARDUINO_ESP8266_NODEMCU_ESP12E -DARDUINO_ARCH_ESP8266 -DARDUINO_BOARD="ESP8266_NODEMCU_ESP12E" -DARDUINO_BOARD_ID="nodemcuv2" -DLED_BUILTIN=2 -DFLASHMODE_DIO -IC:\Users\user\AppData\Local\Arduino15\packages\esp8266\hardware\esp8266\3.1.2\cores\esp8266 -IC:\Users\user\AppData\Local\Arduino15\packages\esp8266\hardware\esp8266\3.1.2\variants\nodemcu C:\Users\user\AppData\Local\Temp\arduino\sketches\1A8A66D807C31ADBD86A6E79CF20C097\sketch\Smart_Pinnes_Home_V9.ino.cpp -o nul Alternatives for ESP8266WiFi.h: [ESP8266WiFi@1.0] ResolveLibrary(ESP8266WiFi.h) -> candidates: [ESP8266WiFi@1.0] C:\Users\user\AppData\Local\Arduino15\packages\esp8266\tools\xtensa-lx106-elf-gcc\3.1.0-gcc10.3-e5f9fec/bin/xtensa-lx106-elf-g++ -D __ets__ -DICACHE_FLASH -U __STRICT_ANSI__ -D_GNU_SOURCE -DESP8266 @C:\Users\user\AppData\Local\Temp\arduino\sketches\1A8A66D807C31ADBD86A6E79CF20C097/core/build.opt -IC:\Users\user\AppData\Local\Arduino15\packages\esp8266\hardware\esp8266\3.1.2/tools/sdk/include -IC:\Users\user\AppData\Local\Arduino15\packages\esp8266\hardware\esp8266\3.1.2/tools/sdk/lwip2/include -IC:\Users\user\AppData\Local\Arduino15\packages\esp8266\hardware\esp8266\3.1.2/tools/sdk/libc/xtensa-lx106-elf/include -IC:\Users\user\AppData\Local\Temp\arduino\sketches\1A8A66D807C31ADBD86A6E79CF20C097/core -c @C:\Users\user\AppData\Local\Arduino15\packages\esp8266\hardware\esp8266\3.1.2/tools/warnings/none-cppflags -Os -g -free -fipa-pta -Werror=return-type -mlongcalls -mtext-section-literals -fno-rtti -falign-functions=4 -std=gnu++17 -ffunction-sections -fdata-sections -fno-exceptions -DMMU_IRAM_SIZE=0x8000 -DMMU_ICACHE_SIZE=0x4000 -DMMU_SEC_HEAP=0x40108000 -DMMU_SEC_HEAP_SIZE=0x4000 -w -x c++ -E -CC -DNONOSDK22x_190703=1 -DF_CPU=80000000L -DLWIP_OPEN_SRC -DTCP_MSS=536 -DLWIP_FEATURES=1 -DLWIP_IPV6=0 -DARDUINO=10607 -DARDUINO_ESP8266_NODEMCU_ESP12E -DARDUINO_ARCH_ESP8266 -DARDUINO_BOARD="ESP8266_NODEMCU_ESP12E" -DARDUINO_BOARD_ID="nodemcuv2" -DLED_BUILTIN=2 -DFLASHMODE_DIO -IC:\Users\user\AppData\Local\Arduino15\packages\esp8266\hardware\esp8266\3.1.2\cores\esp8266 -IC:\Users\user\AppData\Local\Arduino15\packages\esp8266\hardware\esp8266\3.1.2\variants\nodemcu -IC:\Users\user\AppData\Local\Arduino15\packages\esp8266\hardware\esp8266\3.1.2\libraries\ESP8266WiFi\src C:\Users\user\AppData\Local\Temp\arduino\sketches\1A8A66D807C31ADBD86A6E79CF20C097\sketch\Smart_Pinnes_Home_V9.ino.cpp -o nul Alternatives for ESPAsyncTCP.h: [ESP AsyncTCP@1.2.2] ResolveLibrary(ESPAsyncTCP.h) -> candidates: [ESP AsyncTCP@1.2.2] C:\Users\user\AppData\Local\Arduino15\packages\esp8266\tools\xtensa-lx106-elf-gcc\3.1.0-gcc10.3-e5f9fec/bin/xtensa-lx106-elf-g++ -D __ets__ -DICACHE_FLASH -U __STRICT_ANSI__ -D_GNU_SOURCE -DESP8266 @C:\Users\user\AppData\Local\Temp\arduino\sketches\1A8A66D807C31ADBD86A6E79CF20C097/core/build.opt -IC:\Users\user\AppData\Local\Arduino15\packages\esp8266\hardware\esp8266\3.1.2/tools/sdk/include -IC:\Users\user\AppData\Local\Arduino15\packages\esp8266\hardware\esp8266\3.1.2/tools/sdk/lwip2/include -IC:\Users\user\AppData\Local\Arduino15\packages\esp8266\hardware\esp8266\3.1.2/tools/sdk/libc/xtensa-lx106-elf/include -IC:\Users\user\AppData\Local\Temp\arduino\sketches\1A8A66D807C31ADBD86A6E79CF20C097/core -c @C:\Users\user\AppData\Local\Arduino15\packages\esp8266\hardware\esp8266\3.1.2/tools/warnings/none-cppflags -Os -g -free -fipa-pta -Werror=return-type -mlongcalls -mtext-section-literals -fno-rtti -falign-functions=4 -std=gnu++17 -ffunction-sections -fdata-sections -fno-exceptions -DMMU_IRAM_SIZE=0x8000 -DMMU_ICACHE_SIZE=0x4000 -DMMU_SEC_HEAP=0x40108000 -DMMU_SEC_HEAP_SIZE=0x4000 -w -x c++ -E -CC -DNONOSDK22x_190703=1 -DF_CPU=80000000L -DLWIP_OPEN_SRC -DTCP_MSS=536 -DLWIP_FEATURES=1 -DLWIP_IPV6=0 -DARDUINO=10607 -DARDUINO_ESP8266_NODEMCU_ESP12E -DARDUINO_ARCH_ESP8266 -DARDUINO_BOARD="ESP8266_NODEMCU_ESP12E" -DARDUINO_BOARD_ID="nodemcuv2" -DLED_BUILTIN=2 -DFLASHMODE_DIO -IC:\Users\user\AppData\Local\Arduino15\packages\esp8266\hardware\esp8266\3.1.2\cores\esp8266 -IC:\Users\user\AppData\Local\Arduino15\packages\esp8266\hardware\esp8266\3.1.2\variants\nodemcu -IC:\Users\user\AppData\Local\Arduino15\packages\esp8266\hardware\esp8266\3.1.2\libraries\ESP8266WiFi\src -Ic:\Users\user\OneDrive\One-Documents\4-Arduino\libraries\ESPAsyncTCP-master\src C:\Users\user\AppData\Local\Temp\arduino\sketches\1A8A66D807C31ADBD86A6E79CF20C097\sketch\Smart_Pinnes_Home_V9.ino.cpp -o nul Alternatives for ESPAsyncWebServer.h: [ESP Async WebServer@2.7.0] ResolveLibrary(ESPAsyncWebServer.h) -> candidates: [ESP Async WebServer@2.7.0] C:\Users\user\AppData\Local\Arduino15\packages\esp8266\tools\xtensa-lx106-elf-gcc\3.1.0-gcc10.3-e5f9fec/bin/xtensa-lx106-elf-g++ -D __ets__ -DICACHE_FLASH -U __STRICT_ANSI__ -D_GNU_SOURCE -DESP8266 @C:\Users\user\AppData\Local\Temp\arduino\sketches\1A8A66D807C31ADBD86A6E79CF20C097/core/build.opt -IC:\Users\user\AppData\Local\Arduino15\packages\esp8266\hardware\esp8266\3.1.2/tools/sdk/include -IC:\Users\user\AppData\Local\Arduino15\packages\esp8266\hardware\esp8266\3.1.2/tools/sdk/lwip2/include -IC:\Users\user\AppData\Local\Arduino15\packages\esp8266\hardware\esp8266\3.1.2/tools/sdk/libc/xtensa-lx106-elf/include -IC:\Users\user\AppData\Local\Temp\arduino\sketches\1A8A66D807C31ADBD86A6E79CF20C097/core -c @C:\Users\user\AppData\Local\Arduino15\packages\esp8266\hardware\esp8266\3.1.2/tools/warnings/none-cppflags -Os -g -free -fipa-pta -Werror=return-type -mlongcalls -mtext-section-literals -fno-rtti -falign-functions=4 -std=gnu++17 -ffunction-sections -fdata-sections -fno-exceptions -DMMU_IRAM_SIZE=0x8000 -DMMU_ICACHE_SIZE=0x4000 -DMMU_SEC_HEAP=0x40108000 -DMMU_SEC_HEAP_SIZE=0x4000 -w -x c++ -E -CC -DNONOSDK22x_190703=1 -DF_CPU=80000000L -DLWIP_OPEN_SRC -DTCP_MSS=536 -DLWIP_FEATURES=1 -DLWIP_IPV6=0 -DARDUINO=10607 -DARDUINO_ESP8266_NODEMCU_ESP12E -DARDUINO_ARCH_ESP8266 -DARDUINO_BOARD="ESP8266_NODEMCU_ESP12E" -DARDUINO_BOARD_ID="nodemcuv2" -DLED_BUILTIN=2 -DFLASHMODE_DIO -IC:\Users\user\AppData\Local\Arduino15\packages\esp8266\hardware\esp8266\3.1.2\cores\esp8266 -IC:\Users\user\AppData\Local\Arduino15\packages\esp8266\hardware\esp8266\3.1.2\variants\nodemcu -IC:\Users\user\AppData\Local\Arduino15\packages\esp8266\hardware\esp8266\3.1.2\libraries\ESP8266WiFi\src -Ic:\Users\user\OneDrive\One-Documents\4-Arduino\libraries\ESPAsyncTCP-master\src -Ic:\Users\user\OneDrive\One-Documents\4-Arduino\libraries\ESP_Async_WebServer\src C:\Users\user\AppData\Local\Temp\arduino\sketches\1A8A66D807C31ADBD86A6E79CF20C097\sketch\Smart_Pinnes_Home_V9.ino.cpp -o nul Alternatives for Hash.h: [Hash@1.0] ResolveLibrary(Hash.h) -> candidates: [Hash@1.0] C:\Users\user\AppData\Local\Arduino15\packages\esp8266\tools\xtensa-lx106-elf-gcc\3.1.0-gcc10.3-e5f9fec/bin/xtensa-lx106-elf-g++ -D __ets__ -DICACHE_FLASH -U __STRICT_ANSI__ -D_GNU_SOURCE -DESP8266 @C:\Users\user\AppData\Local\Temp\arduino\sketches\1A8A66D807C31ADBD86A6E79CF20C097/core/build.opt -IC:\Users\user\AppData\Local\Arduino15\packages\esp8266\hardware\esp8266\3.1.2/tools/sdk/include -IC:\Users\user\AppData\Local\Arduino15\packages\esp8266\hardware\esp8266\3.1.2/tools/sdk/lwip2/include -IC:\Users\user\AppData\Local\Arduino15\packages\esp8266\hardware\esp8266\3.1.2/tools/sdk/libc/xtensa-lx106-elf/include -IC:\Users\user\AppData\Local\Temp\arduino\sketches\1A8A66D807C31ADBD86A6E79CF20C097/core -c @C:\Users\user\AppData\Local\Arduino15\packages\esp8266\hardware\esp8266\3.1.2/tools/warnings/none-cppflags -Os -g -free -fipa-pta -Werror=return-type -mlongcalls -mtext-section-literals -fno-rtti -falign-functions=4 -std=gnu++17 -ffunction-sections -fdata-sections -fno-exceptions -DMMU_IRAM_SIZE=0x8000 -DMMU_ICACHE_SIZE=0x4000 -DMMU_SEC_HEAP=0x40108000 -DMMU_SEC_HEAP_SIZE=0x4000 -w -x c++ -E -CC -DNONOSDK22x_190703=1 -DF_CPU=80000000L -DLWIP_OPEN_SRC -DTCP_MSS=536 -DLWIP_FEATURES=1 -DLWIP_IPV6=0 -DARDUINO=10607 -DARDUINO_ESP8266_NODEMCU_ESP12E -DARDUINO_ARCH_ESP8266 -DARDUINO_BOARD="ESP8266_NODEMCU_ESP12E" -DARDUINO_BOARD_ID="nodemcuv2" -DLED_BUILTIN=2 -DFLASHMODE_DIO -IC:\Users\user\AppData\Local\Arduino15\packages\esp8266\hardware\esp8266\3.1.2\cores\esp8266 -IC:\Users\user\AppData\Local\Arduino15\packages\esp8266\hardware\esp8266\3.1.2\variants\nodemcu -IC:\Users\user\AppData\Local\Arduino15\packages\esp8266\hardware\esp8266\3.1.2\libraries\ESP8266WiFi\src -Ic:\Users\user\OneDrive\One-Documents\4-Arduino\libraries\ESPAsyncTCP-master\src -Ic:\Users\user\OneDrive\One-Documents\4-Arduino\libraries\ESP_Async_WebServer\src -IC:\Users\user\AppData\Local\Arduino15\packages\esp8266\hardware\esp8266\3.1.2\libraries\Hash\src C:\Users\user\AppData\Local\Temp\arduino\sketches\1A8A66D807C31ADBD86A6E79CF20C097\sketch\Smart_Pinnes_Home_V9.ino.cpp -o nul Alternatives for ElegantOTA.h: [ElegantOTA@3.1.0] ResolveLibrary(ElegantOTA.h) -> candidates: [ElegantOTA@3.1.0] C:\Users\user\AppData\Local\Arduino15\packages\esp8266\tools\xtensa-lx106-elf-gcc\3.1.0-gcc10.3-e5f9fec/bin/xtensa-lx106-elf-g++ -D __ets__ -DICACHE_FLASH -U __STRICT_ANSI__ -D_GNU_SOURCE -DESP8266 @C:\Users\user\AppData\Local\Temp\arduino\sketches\1A8A66D807C31ADBD86A6E79CF20C097/core/build.opt -IC:\Users\user\AppData\Local\Arduino15\packages\esp8266\hardware\esp8266\3.1.2/tools/sdk/include -IC:\Users\user\AppData\Local\Arduino15\packages\esp8266\hardware\esp8266\3.1.2/tools/sdk/lwip2/include -IC:\Users\user\AppData\Local\Arduino15\packages\esp8266\hardware\esp8266\3.1.2/tools/sdk/libc/xtensa-lx106-elf/include -IC:\Users\user\AppData\Local\Temp\arduino\sketches\1A8A66D807C31ADBD86A6E79CF20C097/core -c @C:\Users\user\AppData\Local\Arduino15\packages\esp8266\hardware\esp8266\3.1.2/tools/warnings/none-cppflags -Os -g -free -fipa-pta -Werror=return-type -mlongcalls -mtext-section-literals -fno-rtti -falign-functions=4 -std=gnu++17 -ffunction-sections -fdata-sections -fno-exceptions -DMMU_IRAM_SIZE=0x8000 -DMMU_ICACHE_SIZE=0x4000 -DMMU_SEC_HEAP=0x40108000 -DMMU_SEC_HEAP_SIZE=0x4000 -w -x c++ -E -CC -DNONOSDK22x_190703=1 -DF_CPU=80000000L -DLWIP_OPEN_SRC -DTCP_MSS=536 -DLWIP_FEATURES=1 -DLWIP_IPV6=0 -DARDUINO=10607 -DARDUINO_ESP8266_NODEMCU_ESP12E -DARDUINO_ARCH_ESP8266 -DARDUINO_BOARD="ESP8266_NODEMCU_ESP12E" -DARDUINO_BOARD_ID="nodemcuv2" -DLED_BUILTIN=2 -DFLASHMODE_DIO -IC:\Users\user\AppData\Local\Arduino15\packages\esp8266\hardware\esp8266\3.1.2\cores\esp8266 -IC:\Users\user\AppData\Local\Arduino15\packages\esp8266\hardware\esp8266\3.1.2\variants\nodemcu -IC:\Users\user\AppData\Local\Arduino15\packages\esp8266\hardware\esp8266\3.1.2\libraries\ESP8266WiFi\src -Ic:\Users\user\OneDrive\One-Documents\4-Arduino\libraries\ESPAsyncTCP-master\src -Ic:\Users\user\OneDrive\One-Documents\4-Arduino\libraries\ESP_Async_WebServer\src -IC:\Users\user\AppData\Local\Arduino15\packages\esp8266\hardware\esp8266\3.1.2\libraries\Hash\src -Ic:\Users\user\OneDrive\One-Documents\4-Arduino\libraries\ElegantOTA\src C:\Users\user\AppData\Local\Temp\arduino\sketches\1A8A66D807C31ADBD86A6E79CF20C097\sketch\Smart_Pinnes_Home_V9.ino.cpp -o nul Alternatives for LittleFS.h: [LittleFS@0.1.0] ResolveLibrary(LittleFS.h) -> candidates: [LittleFS@0.1.0] C:\Users\user\AppData\Local\Arduino15\packages\esp8266\tools\xtensa-lx106-elf-gcc\3.1.0-gcc10.3-e5f9fec/bin/xtensa-lx106-elf-g++ -D __ets__ -DICACHE_FLASH -U __STRICT_ANSI__ -D_GNU_SOURCE -DESP8266 @C:\Users\user\AppData\Local\Temp\arduino\sketches\1A8A66D807C31ADBD86A6E79CF20C097/core/build.opt -IC:\Users\user\AppData\Local\Arduino15\packages\esp8266\hardware\esp8266\3.1.2/tools/sdk/include -IC:\Users\user\AppData\Local\Arduino15\packages\esp8266\hardware\esp8266\3.1.2/tools/sdk/lwip2/include -IC:\Users\user\AppData\Local\Arduino15\packages\esp8266\hardware\esp8266\3.1.2/tools/sdk/libc/xtensa-lx106-elf/include -IC:\Users\user\AppData\Local\Temp\arduino\sketches\1A8A66D807C31ADBD86A6E79CF20C097/core -c @C:\Users\user\AppData\Local\Arduino15\packages\esp8266\hardware\esp8266\3.1.2/tools/warnings/none-cppflags -Os -g -free -fipa-pta -Werror=return-type -mlongcalls -mtext-section-literals -fno-rtti -falign-functions=4 -std=gnu++17 -ffunction-sections -fdata-sections -fno-exceptions -DMMU_IRAM_SIZE=0x8000 -DMMU_ICACHE_SIZE=0x4000 -DMMU_SEC_HEAP=0x40108000 -DMMU_SEC_HEAP_SIZE=0x4000 -w -x c++ -E -CC -DNONOSDK22x_190703=1 -DF_CPU=80000000L -DLWIP_OPEN_SRC -DTCP_MSS=536 -DLWIP_FEATURES=1 -DLWIP_IPV6=0 -DARDUINO=10607 -DARDUINO_ESP8266_NODEMCU_ESP12E -DARDUINO_ARCH_ESP8266 -DARDUINO_BOARD="ESP8266_NODEMCU_ESP12E" -DARDUINO_BOARD_ID="nodemcuv2" -DLED_BUILTIN=2 -DFLASHMODE_DIO -IC:\Users\user\AppData\Local\Arduino15\packages\esp8266\hardware\esp8266\3.1.2\cores\esp8266 -IC:\Users\user\AppData\Local\Arduino15\packages\esp8266\hardware\esp8266\3.1.2\variants\nodemcu -IC:\Users\user\AppData\Local\Arduino15\packages\esp8266\hardware\esp8266\3.1.2\libraries\ESP8266WiFi\src -Ic:\Users\user\OneDrive\One-Documents\4-Arduino\libraries\ESPAsyncTCP-master\src -Ic:\Users\user\OneDrive\One-Documents\4-Arduino\libraries\ESP_Async_WebServer\src -IC:\Users\user\AppData\Local\Arduino15\packages\esp8266\hardware\esp8266\3.1.2\libraries\Hash\src -Ic:\Users\user\OneDrive\One-Documents\4-Arduino\libraries\ElegantOTA\src -IC:\Users\user\AppData\Local\Arduino15\packages\esp8266\hardware\esp8266\3.1.2\libraries\LittleFS\src C:\Users\user\AppData\Local\Temp\arduino\sketches\1A8A66D807C31ADBD86A6E79CF20C097\sketch\Smart_Pinnes_Home_V9.ino.cpp -o nul Alternatives for Wire.h: [Wire@1.0] ResolveLibrary(Wire.h) -> candidates: [Wire@1.0] C:\Users\user\AppData\Local\Arduino15\packages\esp8266\tools\xtensa-lx106-elf-gcc\3.1.0-gcc10.3-e5f9fec/bin/xtensa-lx106-elf-g++ -D __ets__ -DICACHE_FLASH -U __STRICT_ANSI__ -D_GNU_SOURCE -DESP8266 @C:\Users\user\AppData\Local\Temp\arduino\sketches\1A8A66D807C31ADBD86A6E79CF20C097/core/build.opt -IC:\Users\user\AppData\Local\Arduino15\packages\esp8266\hardware\esp8266\3.1.2/tools/sdk/include -IC:\Users\user\AppData\Local\Arduino15\packages\esp8266\hardware\esp8266\3.1.2/tools/sdk/lwip2/include -IC:\Users\user\AppData\Local\Arduino15\packages\esp8266\hardware\esp8266\3.1.2/tools/sdk/libc/xtensa-lx106-elf/include -IC:\Users\user\AppData\Local\Temp\arduino\sketches\1A8A66D807C31ADBD86A6E79CF20C097/core -c @C:\Users\user\AppData\Local\Arduino15\packages\esp8266\hardware\esp8266\3.1.2/tools/warnings/none-cppflags -Os -g -free -fipa-pta -Werror=return-type -mlongcalls -mtext-section-literals -fno-rtti -falign-functions=4 -std=gnu++17 -ffunction-sections -fdata-sections -fno-exceptions -DMMU_IRAM_SIZE=0x8000 -DMMU_ICACHE_SIZE=0x4000 -DMMU_SEC_HEAP=0x40108000 -DMMU_SEC_HEAP_SIZE=0x4000 -w -x c++ -E -CC -DNONOSDK22x_190703=1 -DF_CPU=80000000L -DLWIP_OPEN_SRC -DTCP_MSS=536 -DLWIP_FEATURES=1 -DLWIP_IPV6=0 -DARDUINO=10607 -DARDUINO_ESP8266_NODEMCU_ESP12E -DARDUINO_ARCH_ESP8266 -DARDUINO_BOARD="ESP8266_NODEMCU_ESP12E" -DARDUINO_BOARD_ID="nodemcuv2" -DLED_BUILTIN=2 -DFLASHMODE_DIO -IC:\Users\user\AppData\Local\Arduino15\packages\esp8266\hardware\esp8266\3.1.2\cores\esp8266 -IC:\Users\user\AppData\Local\Arduino15\packages\esp8266\hardware\esp8266\3.1.2\variants\nodemcu -IC:\Users\user\AppData\Local\Arduino15\packages\esp8266\hardware\esp8266\3.1.2\libraries\ESP8266WiFi\src -Ic:\Users\user\OneDrive\One-Documents\4-Arduino\libraries\ESPAsyncTCP-master\src -Ic:\Users\user\OneDrive\One-Documents\4-Arduino\libraries\ESP_Async_WebServer\src -IC:\Users\user\AppData\Local\Arduino15\packages\esp8266\hardware\esp8266\3.1.2\libraries\Hash\src -Ic:\Users\user\OneDrive\One-Documents\4-Arduino\libraries\ElegantOTA\src -IC:\Users\user\AppData\Local\Arduino15\packages\esp8266\hardware\esp8266\3.1.2\libraries\LittleFS\src -IC:\Users\user\AppData\Local\Arduino15\packages\esp8266\hardware\esp8266\3.1.2\libraries\Wire C:\Users\user\AppData\Local\Temp\arduino\sketches\1A8A66D807C31ADBD86A6E79CF20C097\sketch\Smart_Pinnes_Home_V9.ino.cpp -o nul Alternatives for EEPROM.h: [EEPROM@1.0] ResolveLibrary(EEPROM.h) -> candidates: [EEPROM@1.0] C:\Users\user\AppData\Local\Arduino15\packages\esp8266\tools\xtensa-lx106-elf-gcc\3.1.0-gcc10.3-e5f9fec/bin/xtensa-lx106-elf-g++ -D __ets__ -DICACHE_FLASH -U __STRICT_ANSI__ -D_GNU_SOURCE -DESP8266 @C:\Users\user\AppData\Local\Temp\arduino\sketches\1A8A66D807C31ADBD86A6E79CF20C097/core/build.opt -IC:\Users\user\AppData\Local\Arduino15\packages\esp8266\hardware\esp8266\3.1.2/tools/sdk/include -IC:\Users\user\AppData\Local\Arduino15\packages\esp8266\hardware\esp8266\3.1.2/tools/sdk/lwip2/include -IC:\Users\user\AppData\Local\Arduino15\packages\esp8266\hardware\esp8266\3.1.2/tools/sdk/libc/xtensa-lx106-elf/include -IC:\Users\user\AppData\Local\Temp\arduino\sketches\1A8A66D807C31ADBD86A6E79CF20C097/core -c @C:\Users\user\AppData\Local\Arduino15\packages\esp8266\hardware\esp8266\3.1.2/tools/warnings/none-cppflags -Os -g -free -fipa-pta -Werror=return-type -mlongcalls -mtext-section-literals -fno-rtti -falign-functions=4 -std=gnu++17 -ffunction-sections -fdata-sections -fno-exceptions -DMMU_IRAM_SIZE=0x8000 -DMMU_ICACHE_SIZE=0x4000 -DMMU_SEC_HEAP=0x40108000 -DMMU_SEC_HEAP_SIZE=0x4000 -w -x c++ -E -CC -DNONOSDK22x_190703=1 -DF_CPU=80000000L -DLWIP_OPEN_SRC -DTCP_MSS=536 -DLWIP_FEATURES=1 -DLWIP_IPV6=0 -DARDUINO=10607 -DARDUINO_ESP8266_NODEMCU_ESP12E -DARDUINO_ARCH_ESP8266 -DARDUINO_BOARD="ESP8266_NODEMCU_ESP12E" -DARDUINO_BOARD_ID="nodemcuv2" -DLED_BUILTIN=2 -DFLASHMODE_DIO -IC:\Users\user\AppData\Local\Arduino15\packages\esp8266\hardware\esp8266\3.1.2\cores\esp8266 -IC:\Users\user\AppData\Local\Arduino15\packages\esp8266\hardware\esp8266\3.1.2\variants\nodemcu -IC:\Users\user\AppData\Local\Arduino15\packages\esp8266\hardware\esp8266\3.1.2\libraries\ESP8266WiFi\src -Ic:\Users\user\OneDrive\One-Documents\4-Arduino\libraries\ESPAsyncTCP-master\src -Ic:\Users\user\OneDrive\One-Documents\4-Arduino\libraries\ESP_Async_WebServer\src -IC:\Users\user\AppData\Local\Arduino15\packages\esp8266\hardware\esp8266\3.1.2\libraries\Hash\src -Ic:\Users\user\OneDrive\One-Documents\4-Arduino\libraries\ElegantOTA\src -IC:\Users\user\AppData\Local\Arduino15\packages\esp8266\hardware\esp8266\3.1.2\libraries\LittleFS\src -IC:\Users\user\AppData\Local\Arduino15\packages\esp8266\hardware\esp8266\3.1.2\libraries\Wire -IC:\Users\user\AppData\Local\Arduino15\packages\esp8266\hardware\esp8266\3.1.2\libraries\EEPROM C:\Users\user\AppData\Local\Temp\arduino\sketches\1A8A66D807C31ADBD86A6E79CF20C097\sketch\Smart_Pinnes_Home_V9.ino.cpp -o nul Alternatives for SPI.h: [SPI@1.0] ResolveLibrary(SPI.h) -> candidates: [SPI@1.0] C:\Users\user\AppData\Local\Arduino15\packages\esp8266\tools\xtensa-lx106-elf-gcc\3.1.0-gcc10.3-e5f9fec/bin/xtensa-lx106-elf-g++ -D __ets__ -DICACHE_FLASH -U __STRICT_ANSI__ -D_GNU_SOURCE -DESP8266 @C:\Users\user\AppData\Local\Temp\arduino\sketches\1A8A66D807C31ADBD86A6E79CF20C097/core/build.opt -IC:\Users\user\AppData\Local\Arduino15\packages\esp8266\hardware\esp8266\3.1.2/tools/sdk/include -IC:\Users\user\AppData\Local\Arduino15\packages\esp8266\hardware\esp8266\3.1.2/tools/sdk/lwip2/include -IC:\Users\user\AppData\Local\Arduino15\packages\esp8266\hardware\esp8266\3.1.2/tools/sdk/libc/xtensa-lx106-elf/include -IC:\Users\user\AppData\Local\Temp\arduino\sketches\1A8A66D807C31ADBD86A6E79CF20C097/core -c @C:\Users\user\AppData\Local\Arduino15\packages\esp8266\hardware\esp8266\3.1.2/tools/warnings/none-cppflags -Os -g -free -fipa-pta -Werror=return-type -mlongcalls -mtext-section-literals -fno-rtti -falign-functions=4 -std=gnu++17 -ffunction-sections -fdata-sections -fno-exceptions -DMMU_IRAM_SIZE=0x8000 -DMMU_ICACHE_SIZE=0x4000 -DMMU_SEC_HEAP=0x40108000 -DMMU_SEC_HEAP_SIZE=0x4000 -w -x c++ -E -CC -DNONOSDK22x_190703=1 -DF_CPU=80000000L -DLWIP_OPEN_SRC -DTCP_MSS=536 -DLWIP_FEATURES=1 -DLWIP_IPV6=0 -DARDUINO=10607 -DARDUINO_ESP8266_NODEMCU_ESP12E -DARDUINO_ARCH_ESP8266 -DARDUINO_BOARD="ESP8266_NODEMCU_ESP12E" -DARDUINO_BOARD_ID="nodemcuv2" -DLED_BUILTIN=2 -DFLASHMODE_DIO -IC:\Users\user\AppData\Local\Arduino15\packages\esp8266\hardware\esp8266\3.1.2\cores\esp8266 -IC:\Users\user\AppData\Local\Arduino15\packages\esp8266\hardware\esp8266\3.1.2\variants\nodemcu -IC:\Users\user\AppData\Local\Arduino15\packages\esp8266\hardware\esp8266\3.1.2\libraries\ESP8266WiFi\src -Ic:\Users\user\OneDrive\One-Documents\4-Arduino\libraries\ESPAsyncTCP-master\src -Ic:\Users\user\OneDrive\One-Documents\4-Arduino\libraries\ESP_Async_WebServer\src -IC:\Users\user\AppData\Local\Arduino15\packages\esp8266\hardware\esp8266\3.1.2\libraries\Hash\src -Ic:\Users\user\OneDrive\One-Documents\4-Arduino\libraries\ElegantOTA\src -IC:\Users\user\AppData\Local\Arduino15\packages\esp8266\hardware\esp8266\3.1.2\libraries\LittleFS\src -IC:\Users\user\AppData\Local\Arduino15\packages\esp8266\hardware\esp8266\3.1.2\libraries\Wire -IC:\Users\user\AppData\Local\Arduino15\packages\esp8266\hardware\esp8266\3.1.2\libraries\EEPROM -IC:\Users\user\AppData\Local\Arduino15\packages\esp8266\hardware\esp8266\3.1.2\libraries\SPI C:\Users\user\AppData\Local\Temp\arduino\sketches\1A8A66D807C31ADBD86A6E79CF20C097\sketch\Smart_Pinnes_Home_V9.ino.cpp -o nul Alternatives for SD.h: [SD@1.2.4 SD@2.0.0] ResolveLibrary(SD.h) -> candidates: [SD@1.2.4 SD@2.0.0] C:\Users\user\AppData\Local\Arduino15\packages\esp8266\tools\xtensa-lx106-elf-gcc\3.1.0-gcc10.3-e5f9fec/bin/xtensa-lx106-elf-g++ -D __ets__ -DICACHE_FLASH -U __STRICT_ANSI__ -D_GNU_SOURCE -DESP8266 @C:\Users\user\AppData\Local\Temp\arduino\sketches\1A8A66D807C31ADBD86A6E79CF20C097/core/build.opt -IC:\Users\user\AppData\Local\Arduino15\packages\esp8266\hardware\esp8266\3.1.2/tools/sdk/include -IC:\Users\user\AppData\Local\Arduino15\packages\esp8266\hardware\esp8266\3.1.2/tools/sdk/lwip2/include -IC:\Users\user\AppData\Local\Arduino15\packages\esp8266\hardware\esp8266\3.1.2/tools/sdk/libc/xtensa-lx106-elf/include -IC:\Users\user\AppData\Local\Temp\arduino\sketches\1A8A66D807C31ADBD86A6E79CF20C097/core -c @C:\Users\user\AppData\Local\Arduino15\packages\esp8266\hardware\esp8266\3.1.2/tools/warnings/none-cppflags -Os -g -free -fipa-pta -Werror=return-type -mlongcalls -mtext-section-literals -fno-rtti -falign-functions=4 -std=gnu++17 -ffunction-sections -fdata-sections -fno-exceptions -DMMU_IRAM_SIZE=0x8000 -DMMU_ICACHE_SIZE=0x4000 -DMMU_SEC_HEAP=0x40108000 -DMMU_SEC_HEAP_SIZE=0x4000 -w -x c++ -E -CC -DNONOSDK22x_190703=1 -DF_CPU=80000000L -DLWIP_OPEN_SRC -DTCP_MSS=536 -DLWIP_FEATURES=1 -DLWIP_IPV6=0 -DARDUINO=10607 -DARDUINO_ESP8266_NODEMCU_ESP12E -DARDUINO_ARCH_ESP8266 -DARDUINO_BOARD="ESP8266_NODEMCU_ESP12E" -DARDUINO_BOARD_ID="nodemcuv2" -DLED_BUILTIN=2 -DFLASHMODE_DIO -IC:\Users\user\AppData\Local\Arduino15\packages\esp8266\hardware\esp8266\3.1.2\cores\esp8266 -IC:\Users\user\AppData\Local\Arduino15\packages\esp8266\hardware\esp8266\3.1.2\variants\nodemcu -IC:\Users\user\AppData\Local\Arduino15\packages\esp8266\hardware\esp8266\3.1.2\libraries\ESP8266WiFi\src -Ic:\Users\user\OneDrive\One-Documents\4-Arduino\libraries\ESPAsyncTCP-master\src -Ic:\Users\user\OneDrive\One-Documents\4-Arduino\libraries\ESP_Async_WebServer\src -IC:\Users\user\AppData\Local\Arduino15\packages\esp8266\hardware\esp8266\3.1.2\libraries\Hash\src -Ic:\Users\user\OneDrive\One-Documents\4-Arduino\libraries\ElegantOTA\src -IC:\Users\user\AppData\Local\Arduino15\packages\esp8266\hardware\esp8266\3.1.2\libraries\LittleFS\src -IC:\Users\user\AppData\Local\Arduino15\packages\esp8266\hardware\esp8266\3.1.2\libraries\Wire -IC:\Users\user\AppData\Local\Arduino15\packages\esp8266\hardware\esp8266\3.1.2\libraries\EEPROM -IC:\Users\user\AppData\Local\Arduino15\packages\esp8266\hardware\esp8266\3.1.2\libraries\SPI -IC:\Users\user\AppData\Local\Arduino15\packages\esp8266\hardware\esp8266\3.1.2\libraries\SD\src C:\Users\user\AppData\Local\Temp\arduino\sketches\1A8A66D807C31ADBD86A6E79CF20C097\sketch\Smart_Pinnes_Home_V9.ino.cpp -o nul Alternatives for SDFS.h: [SDFS@0.1.0] ResolveLibrary(SDFS.h) -> candidates: [SDFS@0.1.0] C:\Users\user\AppData\Local\Arduino15\packages\esp8266\tools\xtensa-lx106-elf-gcc\3.1.0-gcc10.3-e5f9fec/bin/xtensa-lx106-elf-g++ -D __ets__ -DICACHE_FLASH -U __STRICT_ANSI__ -D_GNU_SOURCE -DESP8266 @C:\Users\user\AppData\Local\Temp\arduino\sketches\1A8A66D807C31ADBD86A6E79CF20C097/core/build.opt -IC:\Users\user\AppData\Local\Arduino15\packages\esp8266\hardware\esp8266\3.1.2/tools/sdk/include -IC:\Users\user\AppData\Local\Arduino15\packages\esp8266\hardware\esp8266\3.1.2/tools/sdk/lwip2/include -IC:\Users\user\AppData\Local\Arduino15\packages\esp8266\hardware\esp8266\3.1.2/tools/sdk/libc/xtensa-lx106-elf/include -IC:\Users\user\AppData\Local\Temp\arduino\sketches\1A8A66D807C31ADBD86A6E79CF20C097/core -c @C:\Users\user\AppData\Local\Arduino15\packages\esp8266\hardware\esp8266\3.1.2/tools/warnings/none-cppflags -Os -g -free -fipa-pta -Werror=return-type -mlongcalls -mtext-section-literals -fno-rtti -falign-functions=4 -std=gnu++17 -ffunction-sections -fdata-sections -fno-exceptions -DMMU_IRAM_SIZE=0x8000 -DMMU_ICACHE_SIZE=0x4000 -DMMU_SEC_HEAP=0x40108000 -DMMU_SEC_HEAP_SIZE=0x4000 -w -x c++ -E -CC -DNONOSDK22x_190703=1 -DF_CPU=80000000L -DLWIP_OPEN_SRC -DTCP_MSS=536 -DLWIP_FEATURES=1 -DLWIP_IPV6=0 -DARDUINO=10607 -DARDUINO_ESP8266_NODEMCU_ESP12E -DARDUINO_ARCH_ESP8266 -DARDUINO_BOARD="ESP8266_NODEMCU_ESP12E" -DARDUINO_BOARD_ID="nodemcuv2" -DLED_BUILTIN=2 -DFLASHMODE_DIO -IC:\Users\user\AppData\Local\Arduino15\packages\esp8266\hardware\esp8266\3.1.2\cores\esp8266 -IC:\Users\user\AppData\Local\Arduino15\packages\esp8266\hardware\esp8266\3.1.2\variants\nodemcu -IC:\Users\user\AppData\Local\Arduino15\packages\esp8266\hardware\esp8266\3.1.2\libraries\ESP8266WiFi\src -Ic:\Users\user\OneDrive\One-Documents\4-Arduino\libraries\ESPAsyncTCP-master\src -Ic:\Users\user\OneDrive\One-Documents\4-Arduino\libraries\ESP_Async_WebServer\src -IC:\Users\user\AppData\Local\Arduino15\packages\esp8266\hardware\esp8266\3.1.2\libraries\Hash\src -Ic:\Users\user\OneDrive\One-Documents\4-Arduino\libraries\ElegantOTA\src -IC:\Users\user\AppData\Local\Arduino15\packages\esp8266\hardware\esp8266\3.1.2\libraries\LittleFS\src -IC:\Users\user\AppData\Local\Arduino15\packages\esp8266\hardware\esp8266\3.1.2\libraries\Wire -IC:\Users\user\AppData\Local\Arduino15\packages\esp8266\hardware\esp8266\3.1.2\libraries\EEPROM -IC:\Users\user\AppData\Local\Arduino15\packages\esp8266\hardware\esp8266\3.1.2\libraries\SPI -IC:\Users\user\AppData\Local\Arduino15\packages\esp8266\hardware\esp8266\3.1.2\libraries\SD\src -IC:\Users\user\AppData\Local\Arduino15\packages\esp8266\hardware\esp8266\3.1.2\libraries\SDFS\src C:\Users\user\AppData\Local\Temp\arduino\sketches\1A8A66D807C31ADBD86A6E79CF20C097\sketch\Smart_Pinnes_Home_V9.ino.cpp -o nul Alternatives for SdFat.h: [ESP8266SdFat@2.1.1] ResolveLibrary(SdFat.h) -> candidates: [ESP8266SdFat@2.1.1] C:\Users\user\AppData\Local\Arduino15\packages\esp8266\tools\xtensa-lx106-elf-gcc\3.1.0-gcc10.3-e5f9fec/bin/xtensa-lx106-elf-g++ -D __ets__ -DICACHE_FLASH -U __STRICT_ANSI__ -D_GNU_SOURCE -DESP8266 @C:\Users\user\AppData\Local\Temp\arduino\sketches\1A8A66D807C31ADBD86A6E79CF20C097/core/build.opt -IC:\Users\user\AppData\Local\Arduino15\packages\esp8266\hardware\esp8266\3.1.2/tools/sdk/include -IC:\Users\user\AppData\Local\Arduino15\packages\esp8266\hardware\esp8266\3.1.2/tools/sdk/lwip2/include -IC:\Users\user\AppData\Local\Arduino15\packages\esp8266\hardware\esp8266\3.1.2/tools/sdk/libc/xtensa-lx106-elf/include -IC:\Users\user\AppData\Local\Temp\arduino\sketches\1A8A66D807C31ADBD86A6E79CF20C097/core -c @C:\Users\user\AppData\Local\Arduino15\packages\esp8266\hardware\esp8266\3.1.2/tools/warnings/none-cppflags -Os -g -free -fipa-pta -Werror=return-type -mlongcalls -mtext-section-literals -fno-rtti -falign-functions=4 -std=gnu++17 -ffunction-sections -fdata-sections -fno-exceptions -DMMU_IRAM_SIZE=0x8000 -DMMU_ICACHE_SIZE=0x4000 -DMMU_SEC_HEAP=0x40108000 -DMMU_SEC_HEAP_SIZE=0x4000 -w -x c++ -E -CC -DNONOSDK22x_190703=1 -DF_CPU=80000000L -DLWIP_OPEN_SRC -DTCP_MSS=536 -DLWIP_FEATURES=1 -DLWIP_IPV6=0 -DARDUINO=10607 -DARDUINO_ESP8266_NODEMCU_ESP12E -DARDUINO_ARCH_ESP8266 -DARDUINO_BOARD="ESP8266_NODEMCU_ESP12E" -DARDUINO_BOARD_ID="nodemcuv2" -DLED_BUILTIN=2 -DFLASHMODE_DIO -IC:\Users\user\AppData\Local\Arduino15\packages\esp8266\hardware\esp8266\3.1.2\cores\esp8266 -IC:\Users\user\AppData\Local\Arduino15\packages\esp8266\hardware\esp8266\3.1.2\variants\nodemcu -IC:\Users\user\AppData\Local\Arduino15\packages\esp8266\hardware\esp8266\3.1.2\libraries\ESP8266WiFi\src -Ic:\Users\user\OneDrive\One-Documents\4-Arduino\libraries\ESPAsyncTCP-master\src -Ic:\Users\user\OneDrive\One-Documents\4-Arduino\libraries\ESP_Async_WebServer\src -IC:\Users\user\AppData\Local\Arduino15\packages\esp8266\hardware\esp8266\3.1.2\libraries\Hash\src -Ic:\Users\user\OneDrive\One-Documents\4-Arduino\libraries\ElegantOTA\src -IC:\Users\user\AppData\Local\Arduino15\packages\esp8266\hardware\esp8266\3.1.2\libraries\LittleFS\src -IC:\Users\user\AppData\Local\Arduino15\packages\esp8266\hardware\esp8266\3.1.2\libraries\Wire -IC:\Users\user\AppData\Local\Arduino15\packages\esp8266\hardware\esp8266\3.1.2\libraries\EEPROM -IC:\Users\user\AppData\Local\Arduino15\packages\esp8266\hardware\esp8266\3.1.2\libraries\SPI -IC:\Users\user\AppData\Local\Arduino15\packages\esp8266\hardware\esp8266\3.1.2\libraries\SD\src -IC:\Users\user\AppData\Local\Arduino15\packages\esp8266\hardware\esp8266\3.1.2\libraries\SDFS\src -IC:\Users\user\AppData\Local\Arduino15\packages\esp8266\hardware\esp8266\3.1.2\libraries\ESP8266SdFat\src C:\Users\user\AppData\Local\Temp\arduino\sketches\1A8A66D807C31ADBD86A6E79CF20C097\sketch\Smart_Pinnes_Home_V9.ino.cpp -o nul Alternatives for EMailSender.h: [EMailSender@3.0.13] ResolveLibrary(EMailSender.h) -> candidates: [EMailSender@3.0.13] C:\Users\user\AppData\Local\Arduino15\packages\esp8266\tools\xtensa-lx106-elf-gcc\3.1.0-gcc10.3-e5f9fec/bin/xtensa-lx106-elf-g++ -D __ets__ -DICACHE_FLASH -U __STRICT_ANSI__ -D_GNU_SOURCE -DESP8266 @C:\Users\user\AppData\Local\Temp\arduino\sketches\1A8A66D807C31ADBD86A6E79CF20C097/core/build.opt -IC:\Users\user\AppData\Local\Arduino15\packages\esp8266\hardware\esp8266\3.1.2/tools/sdk/include -IC:\Users\user\AppData\Local\Arduino15\packages\esp8266\hardware\esp8266\3.1.2/tools/sdk/lwip2/include -IC:\Users\user\AppData\Local\Arduino15\packages\esp8266\hardware\esp8266\3.1.2/tools/sdk/libc/xtensa-lx106-elf/include -IC:\Users\user\AppData\Local\Temp\arduino\sketches\1A8A66D807C31ADBD86A6E79CF20C097/core -c @C:\Users\user\AppData\Local\Arduino15\packages\esp8266\hardware\esp8266\3.1.2/tools/warnings/none-cppflags -Os -g -free -fipa-pta -Werror=return-type -mlongcalls -mtext-section-literals -fno-rtti -falign-functions=4 -std=gnu++17 -ffunction-sections -fdata-sections -fno-exceptions -DMMU_IRAM_SIZE=0x8000 -DMMU_ICACHE_SIZE=0x4000 -DMMU_SEC_HEAP=0x40108000 -DMMU_SEC_HEAP_SIZE=0x4000 -w -x c++ -E -CC -DNONOSDK22x_190703=1 -DF_CPU=80000000L -DLWIP_OPEN_SRC -DTCP_MSS=536 -DLWIP_FEATURES=1 -DLWIP_IPV6=0 -DARDUINO=10607 -DARDUINO_ESP8266_NODEMCU_ESP12E -DARDUINO_ARCH_ESP8266 -DARDUINO_BOARD="ESP8266_NODEMCU_ESP12E" -DARDUINO_BOARD_ID="nodemcuv2" -DLED_BUILTIN=2 -DFLASHMODE_DIO -IC:\Users\user\AppData\Local\Arduino15\packages\esp8266\hardware\esp8266\3.1.2\cores\esp8266 -IC:\Users\user\AppData\Local\Arduino15\packages\esp8266\hardware\esp8266\3.1.2\variants\nodemcu -IC:\Users\user\AppData\Local\Arduino15\packages\esp8266\hardware\esp8266\3.1.2\libraries\ESP8266WiFi\src -Ic:\Users\user\OneDrive\One-Documents\4-Arduino\libraries\ESPAsyncTCP-master\src -Ic:\Users\user\OneDrive\One-Documents\4-Arduino\libraries\ESP_Async_WebServer\src -IC:\Users\user\AppData\Local\Arduino15\packages\esp8266\hardware\esp8266\3.1.2\libraries\Hash\src -Ic:\Users\user\OneDrive\One-Documents\4-Arduino\libraries\ElegantOTA\src -IC:\Users\user\AppData\Local\Arduino15\packages\esp8266\hardware\esp8266\3.1.2\libraries\LittleFS\src -IC:\Users\user\AppData\Local\Arduino15\packages\esp8266\hardware\esp8266\3.1.2\libraries\Wire -IC:\Users\user\AppData\Local\Arduino15\packages\esp8266\hardware\esp8266\3.1.2\libraries\EEPROM -IC:\Users\user\AppData\Local\Arduino15\packages\esp8266\hardware\esp8266\3.1.2\libraries\SPI -IC:\Users\user\AppData\Local\Arduino15\packages\esp8266\hardware\esp8266\3.1.2\libraries\SD\src -IC:\Users\user\AppData\Local\Arduino15\packages\esp8266\hardware\esp8266\3.1.2\libraries\SDFS\src -IC:\Users\user\AppData\Local\Arduino15\packages\esp8266\hardware\esp8266\3.1.2\libraries\ESP8266SdFat\src -Ic:\Users\user\OneDrive\One-Documents\4-Arduino\libraries\EMailSender-master C:\Users\user\AppData\Local\Temp\arduino\sketches\1A8A66D807C31ADBD86A6E79CF20C097\sketch\Smart_Pinnes_Home_V9.ino.cpp -o nul Using cached library dependencies for file: C:\Users\user\AppData\Local\Arduino15\packages\esp8266\hardware\esp8266\3.1.2\libraries\ESP8266WiFi\src\BearSSLHelpers.cpp Using cached library dependencies for file: C:\Users\user\AppData\Local\Arduino15\packages\esp8266\hardware\esp8266\3.1.2\libraries\ESP8266WiFi\src\CertStoreBearSSL.cpp Using cached library dependencies for file: C:\Users\user\AppData\Local\Arduino15\packages\esp8266\hardware\esp8266\3.1.2\libraries\ESP8266WiFi\src\ESP8266WiFi.cpp Using cached library dependencies for file: C:\Users\user\AppData\Local\Arduino15\packages\esp8266\hardware\esp8266\3.1.2\libraries\ESP8266WiFi\src\ESP8266WiFiAP.cpp Using cached library dependencies for file: C:\Users\user\AppData\Local\Arduino15\packages\esp8266\hardware\esp8266\3.1.2\libraries\ESP8266WiFi\src\ESP8266WiFiGeneric.cpp Using cached library dependencies for file: C:\Users\user\AppData\Local\Arduino15\packages\esp8266\hardware\esp8266\3.1.2\libraries\ESP8266WiFi\src\ESP8266WiFiGratuitous.cpp Using cached library dependencies for file: C:\Users\user\AppData\Local\Arduino15\packages\esp8266\hardware\esp8266\3.1.2\libraries\ESP8266WiFi\src\ESP8266WiFiMulti.cpp Using cached library dependencies for file: C:\Users\user\AppData\Local\Arduino15\packages\esp8266\hardware\esp8266\3.1.2\libraries\ESP8266WiFi\src\ESP8266WiFiSTA-WPS.cpp Using cached library dependencies for file: C:\Users\user\AppData\Local\Arduino15\packages\esp8266\hardware\esp8266\3.1.2\libraries\ESP8266WiFi\src\ESP8266WiFiSTA.cpp Using cached library dependencies for file: C:\Users\user\AppData\Local\Arduino15\packages\esp8266\hardware\esp8266\3.1.2\libraries\ESP8266WiFi\src\ESP8266WiFiScan.cpp Using cached library dependencies for file: C:\Users\user\AppData\Local\Arduino15\packages\esp8266\hardware\esp8266\3.1.2\libraries\ESP8266WiFi\src\WiFiClient.cpp Using cached library dependencies for file: C:\Users\user\AppData\Local\Arduino15\packages\esp8266\hardware\esp8266\3.1.2\libraries\ESP8266WiFi\src\WiFiClientSecureBearSSL.cpp Using cached library dependencies for file: C:\Users\user\AppData\Local\Arduino15\packages\esp8266\hardware\esp8266\3.1.2\libraries\ESP8266WiFi\src\WiFiServer.cpp Using cached library dependencies for file: C:\Users\user\AppData\Local\Arduino15\packages\esp8266\hardware\esp8266\3.1.2\libraries\ESP8266WiFi\src\WiFiServerSecureBearSSL.cpp Using cached library dependencies for file: C:\Users\user\AppData\Local\Arduino15\packages\esp8266\hardware\esp8266\3.1.2\libraries\ESP8266WiFi\src\WiFiUdp.cpp Using cached library dependencies for file: C:\Users\user\AppData\Local\Arduino15\packages\esp8266\hardware\esp8266\3.1.2\libraries\ESP8266WiFi\src\enable_wifi_at_boot_time.cpp Using cached library dependencies for file: c:\Users\user\OneDrive\One-Documents\4-Arduino\libraries\ESPAsyncTCP-master\src\AsyncPrinter.cpp Using cached library dependencies for file: c:\Users\user\OneDrive\One-Documents\4-Arduino\libraries\ESPAsyncTCP-master\src\ESPAsyncTCP.cpp Using cached library dependencies for file: c:\Users\user\OneDrive\One-Documents\4-Arduino\libraries\ESPAsyncTCP-master\src\ESPAsyncTCPbuffer.cpp Using cached library dependencies for file: c:\Users\user\OneDrive\One-Documents\4-Arduino\libraries\ESPAsyncTCP-master\src\SyncClient.cpp Using cached library dependencies for file: c:\Users\user\OneDrive\One-Documents\4-Arduino\libraries\ESPAsyncTCP-master\src\tcp_axtls.c Using cached library dependencies for file: c:\Users\user\OneDrive\One-Documents\4-Arduino\libraries\ESP_Async_WebServer\src\AsyncEventSource.cpp Using cached library dependencies for file: c:\Users\user\OneDrive\One-Documents\4-Arduino\libraries\ESP_Async_WebServer\src\AsyncWebSocket.cpp Using cached library dependencies for file: c:\Users\user\OneDrive\One-Documents\4-Arduino\libraries\ESP_Async_WebServer\src\WebAuthentication.cpp Using cached library dependencies for file: c:\Users\user\OneDrive\One-Documents\4-Arduino\libraries\ESP_Async_WebServer\src\WebHandlers.cpp Using cached library dependencies for file: c:\Users\user\OneDrive\One-Documents\4-Arduino\libraries\ESP_Async_WebServer\src\WebRequest.cpp Using cached library dependencies for file: c:\Users\user\OneDrive\One-Documents\4-Arduino\libraries\ESP_Async_WebServer\src\WebResponses.cpp Using cached library dependencies for file: c:\Users\user\OneDrive\One-Documents\4-Arduino\libraries\ESP_Async_WebServer\src\WebServer.cpp Using cached library dependencies for file: C:\Users\user\AppData\Local\Arduino15\packages\esp8266\hardware\esp8266\3.1.2\libraries\Hash\src\Hash.cpp Using cached library dependencies for file: c:\Users\user\OneDrive\One-Documents\4-Arduino\libraries\ElegantOTA\src\ElegantOTA.cpp Using cached library dependencies for file: c:\Users\user\OneDrive\One-Documents\4-Arduino\libraries\ElegantOTA\src\elop.cpp Using cached library dependencies for file: C:\Users\user\AppData\Local\Arduino15\packages\esp8266\hardware\esp8266\3.1.2\libraries\LittleFS\src\LittleFS.cpp Using cached library dependencies for file: C:\Users\user\AppData\Local\Arduino15\packages\esp8266\hardware\esp8266\3.1.2\libraries\LittleFS\src\lfs.c Using cached library dependencies for file: C:\Users\user\AppData\Local\Arduino15\packages\esp8266\hardware\esp8266\3.1.2\libraries\LittleFS\src\lfs_util.c Using cached library dependencies for file: C:\Users\user\AppData\Local\Arduino15\packages\esp8266\hardware\esp8266\3.1.2\libraries\Wire\Wire.cpp Using cached library dependencies for file: C:\Users\user\AppData\Local\Arduino15\packages\esp8266\hardware\esp8266\3.1.2\libraries\EEPROM\EEPROM.cpp Using cached library dependencies for file: C:\Users\user\AppData\Local\Arduino15\packages\esp8266\hardware\esp8266\3.1.2\libraries\SPI\SPI.cpp Using cached library dependencies for file: C:\Users\user\AppData\Local\Arduino15\packages\esp8266\hardware\esp8266\3.1.2\libraries\SD\src\SD.cpp Using cached library dependencies for file: C:\Users\user\AppData\Local\Arduino15\packages\esp8266\hardware\esp8266\3.1.2\libraries\SDFS\src\SDFS.cpp Using cached library dependencies for file: C:\Users\user\AppData\Local\Arduino15\packages\esp8266\hardware\esp8266\3.1.2\libraries\ESP8266SdFat\src\ExFatLib\ExFatDbg.cpp Using cached library dependencies for file: C:\Users\user\AppData\Local\Arduino15\packages\esp8266\hardware\esp8266\3.1.2\libraries\ESP8266SdFat\src\ExFatLib\ExFatFile.cpp Using cached library dependencies for file: C:\Users\user\AppData\Local\Arduino15\packages\esp8266\hardware\esp8266\3.1.2\libraries\ESP8266SdFat\src\ExFatLib\ExFatFilePrint.cpp Using cached library dependencies for file: C:\Users\user\AppData\Local\Arduino15\packages\esp8266\hardware\esp8266\3.1.2\libraries\ESP8266SdFat\src\ExFatLib\ExFatFileWrite.cpp Using cached library dependencies for file: C:\Users\user\AppData\Local\Arduino15\packages\esp8266\hardware\esp8266\3.1.2\libraries\ESP8266SdFat\src\ExFatLib\ExFatFormatter.cpp Using cached library dependencies for file: C:\Users\user\AppData\Local\Arduino15\packages\esp8266\hardware\esp8266\3.1.2\libraries\ESP8266SdFat\src\ExFatLib\ExFatName.cpp Using cached library dependencies for file: C:\Users\user\AppData\Local\Arduino15\packages\esp8266\hardware\esp8266\3.1.2\libraries\ESP8266SdFat\src\ExFatLib\ExFatPartition.cpp Using cached library dependencies for file: C:\Users\user\AppData\Local\Arduino15\packages\esp8266\hardware\esp8266\3.1.2\libraries\ESP8266SdFat\src\ExFatLib\ExFatVolume.cpp Using cached library dependencies for file: C:\Users\user\AppData\Local\Arduino15\packages\esp8266\hardware\esp8266\3.1.2\libraries\ESP8266SdFat\src\FatLib\FatDbg.cpp Using cached library dependencies for file: C:\Users\user\AppData\Local\Arduino15\packages\esp8266\hardware\esp8266\3.1.2\libraries\ESP8266SdFat\src\FatLib\FatFile.cpp Using cached library dependencies for file: C:\Users\user\AppData\Local\Arduino15\packages\esp8266\hardware\esp8266\3.1.2\libraries\ESP8266SdFat\src\FatLib\FatFileLFN.cpp Using cached library dependencies for file: C:\Users\user\AppData\Local\Arduino15\packages\esp8266\hardware\esp8266\3.1.2\libraries\ESP8266SdFat\src\FatLib\FatFilePrint.cpp Using cached library dependencies for file: C:\Users\user\AppData\Local\Arduino15\packages\esp8266\hardware\esp8266\3.1.2\libraries\ESP8266SdFat\src\FatLib\FatFileSFN.cpp Using cached library dependencies for file: C:\Users\user\AppData\Local\Arduino15\packages\esp8266\hardware\esp8266\3.1.2\libraries\ESP8266SdFat\src\FatLib\FatFormatter.cpp Using cached library dependencies for file: C:\Users\user\AppData\Local\Arduino15\packages\esp8266\hardware\esp8266\3.1.2\libraries\ESP8266SdFat\src\FatLib\FatName.cpp Using cached library dependencies for file: C:\Users\user\AppData\Local\Arduino15\packages\esp8266\hardware\esp8266\3.1.2\libraries\ESP8266SdFat\src\FatLib\FatPartition.cpp Using cached library dependencies for file: C:\Users\user\AppData\Local\Arduino15\packages\esp8266\hardware\esp8266\3.1.2\libraries\ESP8266SdFat\src\FatLib\FatVolume.cpp Using cached library dependencies for file: C:\Users\user\AppData\Local\Arduino15\packages\esp8266\hardware\esp8266\3.1.2\libraries\ESP8266SdFat\src\FreeStack.cpp Using cached library dependencies for file: C:\Users\user\AppData\Local\Arduino15\packages\esp8266\hardware\esp8266\3.1.2\libraries\ESP8266SdFat\src\FsLib\FsFile.cpp Using cached library dependencies for file: C:\Users\user\AppData\Local\Arduino15\packages\esp8266\hardware\esp8266\3.1.2\libraries\ESP8266SdFat\src\FsLib\FsNew.cpp Using cached library dependencies for file: C:\Users\user\AppData\Local\Arduino15\packages\esp8266\hardware\esp8266\3.1.2\libraries\ESP8266SdFat\src\FsLib\FsVolume.cpp Using cached library dependencies for file: C:\Users\user\AppData\Local\Arduino15\packages\esp8266\hardware\esp8266\3.1.2\libraries\ESP8266SdFat\src\MinimumSerial.cpp Using cached library dependencies for file: C:\Users\user\AppData\Local\Arduino15\packages\esp8266\hardware\esp8266\3.1.2\libraries\ESP8266SdFat\src\SdCard\SdCardInfo.cpp Using cached library dependencies for file: C:\Users\user\AppData\Local\Arduino15\packages\esp8266\hardware\esp8266\3.1.2\libraries\ESP8266SdFat\src\SdCard\SdSpiCard.cpp Using cached library dependencies for file: C:\Users\user\AppData\Local\Arduino15\packages\esp8266\hardware\esp8266\3.1.2\libraries\ESP8266SdFat\src\SdCard\SdioTeensy.cpp Using cached library dependencies for file: C:\Users\user\AppData\Local\Arduino15\packages\esp8266\hardware\esp8266\3.1.2\libraries\ESP8266SdFat\src\SpiDriver\SdSpiArtemis.cpp Using cached library dependencies for file: C:\Users\user\AppData\Local\Arduino15\packages\esp8266\hardware\esp8266\3.1.2\libraries\ESP8266SdFat\src\SpiDriver\SdSpiChipSelect.cpp Using cached library dependencies for file: C:\Users\user\AppData\Local\Arduino15\packages\esp8266\hardware\esp8266\3.1.2\libraries\ESP8266SdFat\src\SpiDriver\SdSpiDue.cpp Using cached library dependencies for file: C:\Users\user\AppData\Local\Arduino15\packages\esp8266\hardware\esp8266\3.1.2\libraries\ESP8266SdFat\src\SpiDriver\SdSpiESP.cpp Using cached library dependencies for file: C:\Users\user\AppData\Local\Arduino15\packages\esp8266\hardware\esp8266\3.1.2\libraries\ESP8266SdFat\src\SpiDriver\SdSpiParticle.cpp Using cached library dependencies for file: C:\Users\user\AppData\Local\Arduino15\packages\esp8266\hardware\esp8266\3.1.2\libraries\ESP8266SdFat\src\SpiDriver\SdSpiSTM32.cpp Using cached library dependencies for file: C:\Users\user\AppData\Local\Arduino15\packages\esp8266\hardware\esp8266\3.1.2\libraries\ESP8266SdFat\src\SpiDriver\SdSpiSTM32Core.cpp Using cached library dependencies for file: C:\Users\user\AppData\Local\Arduino15\packages\esp8266\hardware\esp8266\3.1.2\libraries\ESP8266SdFat\src\SpiDriver\SdSpiTeensy3.cpp Using cached library dependencies for file: C:\Users\user\AppData\Local\Arduino15\packages\esp8266\hardware\esp8266\3.1.2\libraries\ESP8266SdFat\src\common\FmtNumber.cpp Using cached library dependencies for file: C:\Users\user\AppData\Local\Arduino15\packages\esp8266\hardware\esp8266\3.1.2\libraries\ESP8266SdFat\src\common\FsCache.cpp Using cached library dependencies for file: C:\Users\user\AppData\Local\Arduino15\packages\esp8266\hardware\esp8266\3.1.2\libraries\ESP8266SdFat\src\common\FsDateTime.cpp Using cached library dependencies for file: C:\Users\user\AppData\Local\Arduino15\packages\esp8266\hardware\esp8266\3.1.2\libraries\ESP8266SdFat\src\common\FsName.cpp Using cached library dependencies for file: C:\Users\user\AppData\Local\Arduino15\packages\esp8266\hardware\esp8266\3.1.2\libraries\ESP8266SdFat\src\common\FsStructs.cpp Using cached library dependencies for file: C:\Users\user\AppData\Local\Arduino15\packages\esp8266\hardware\esp8266\3.1.2\libraries\ESP8266SdFat\src\common\FsUtf.cpp Using cached library dependencies for file: C:\Users\user\AppData\Local\Arduino15\packages\esp8266\hardware\esp8266\3.1.2\libraries\ESP8266SdFat\src\common\upcase.cpp Using cached library dependencies for file: C:\Users\user\AppData\Local\Arduino15\packages\esp8266\hardware\esp8266\3.1.2\libraries\ESP8266SdFat\src\iostream\StdioStream.cpp Using cached library dependencies for file: C:\Users\user\AppData\Local\Arduino15\packages\esp8266\hardware\esp8266\3.1.2\libraries\ESP8266SdFat\src\iostream\StreamBaseClass.cpp Using cached library dependencies for file: C:\Users\user\AppData\Local\Arduino15\packages\esp8266\hardware\esp8266\3.1.2\libraries\ESP8266SdFat\src\iostream\istream.cpp Using cached library dependencies for file: C:\Users\user\AppData\Local\Arduino15\packages\esp8266\hardware\esp8266\3.1.2\libraries\ESP8266SdFat\src\iostream\ostream.cpp Using cached library dependencies for file: c:\Users\user\OneDrive\One-Documents\4-Arduino\libraries\EMailSender-master\EMailSender.cpp WARNING: library ESP Async WebServer claims to run on esp32 architecture(s) and may be incompatible with your current board which runs on esp8266 architecture(s). Generating function prototypes... C:\Users\user\AppData\Local\Arduino15\packages\esp8266\tools\xtensa-lx106-elf-gcc\3.1.0-gcc10.3-e5f9fec/bin/xtensa-lx106-elf-g++ -D __ets__ -DICACHE_FLASH -U __STRICT_ANSI__ -D_GNU_SOURCE -DESP8266 @C:\Users\user\AppData\Local\Temp\arduino\sketches\1A8A66D807C31ADBD86A6E79CF20C097/core/build.opt -IC:\Users\user\AppData\Local\Arduino15\packages\esp8266\hardware\esp8266\3.1.2/tools/sdk/include -IC:\Users\user\AppData\Local\Arduino15\packages\esp8266\hardware\esp8266\3.1.2/tools/sdk/lwip2/include -IC:\Users\user\AppData\Local\Arduino15\packages\esp8266\hardware\esp8266\3.1.2/tools/sdk/libc/xtensa-lx106-elf/include -IC:\Users\user\AppData\Local\Temp\arduino\sketches\1A8A66D807C31ADBD86A6E79CF20C097/core -c @C:\Users\user\AppData\Local\Arduino15\packages\esp8266\hardware\esp8266\3.1.2/tools/warnings/none-cppflags -Os -g -free -fipa-pta -Werror=return-type -mlongcalls -mtext-section-literals -fno-rtti -falign-functions=4 -std=gnu++17 -ffunction-sections -fdata-sections -fno-exceptions -DMMU_IRAM_SIZE=0x8000 -DMMU_ICACHE_SIZE=0x4000 -DMMU_SEC_HEAP=0x40108000 -DMMU_SEC_HEAP_SIZE=0x4000 -w -x c++ -E -CC -DNONOSDK22x_190703=1 -DF_CPU=80000000L -DLWIP_OPEN_SRC -DTCP_MSS=536 -DLWIP_FEATURES=1 -DLWIP_IPV6=0 -DARDUINO=10607 -DARDUINO_ESP8266_NODEMCU_ESP12E -DARDUINO_ARCH_ESP8266 -DARDUINO_BOARD="ESP8266_NODEMCU_ESP12E" -DARDUINO_BOARD_ID="nodemcuv2" -DLED_BUILTIN=2 -DFLASHMODE_DIO -IC:\Users\user\AppData\Local\Arduino15\packages\esp8266\hardware\esp8266\3.1.2\cores\esp8266 -IC:\Users\user\AppData\Local\Arduino15\packages\esp8266\hardware\esp8266\3.1.2\variants\nodemcu -IC:\Users\user\AppData\Local\Arduino15\packages\esp8266\hardware\esp8266\3.1.2\libraries\ESP8266WiFi\src -Ic:\Users\user\OneDrive\One-Documents\4-Arduino\libraries\ESPAsyncTCP-master\src -Ic:\Users\user\OneDrive\One-Documents\4-Arduino\libraries\ESP_Async_WebServer\src -IC:\Users\user\AppData\Local\Arduino15\packages\esp8266\hardware\esp8266\3.1.2\libraries\Hash\src -Ic:\Users\user\OneDrive\One-Documents\4-Arduino\libraries\ElegantOTA\src -IC:\Users\user\AppData\Local\Arduino15\packages\esp8266\hardware\esp8266\3.1.2\libraries\LittleFS\src -IC:\Users\user\AppData\Local\Arduino15\packages\esp8266\hardware\esp8266\3.1.2\libraries\Wire -IC:\Users\user\AppData\Local\Arduino15\packages\esp8266\hardware\esp8266\3.1.2\libraries\EEPROM -IC:\Users\user\AppData\Local\Arduino15\packages\esp8266\hardware\esp8266\3.1.2\libraries\SPI -IC:\Users\user\AppData\Local\Arduino15\packages\esp8266\hardware\esp8266\3.1.2\libraries\SD\src -IC:\Users\user\AppData\Local\Arduino15\packages\esp8266\hardware\esp8266\3.1.2\libraries\SDFS\src -IC:\Users\user\AppData\Local\Arduino15\packages\esp8266\hardware\esp8266\3.1.2\libraries\ESP8266SdFat\src -Ic:\Users\user\OneDrive\One-Documents\4-Arduino\libraries\EMailSender-master C:\Users\user\AppData\Local\Temp\arduino\sketches\1A8A66D807C31ADBD86A6E79CF20C097\sketch\Smart_Pinnes_Home_V9.ino.cpp -o C:\Users\user\AppData\Local\Temp\4205561808\sketch_merged.cpp C:\Users\user\AppData\Local\Arduino15\packages\builtin\tools\ctags\5.8-arduino11/ctags -u --language-force=c++ -f - --c++-kinds=svpf --fields=KSTtzns --line-directives C:\Users\user\AppData\Local\Temp\4205561808\sketch_merged.cpp Compiling sketch... "C:\\Users\\user\\AppData\\Local\\Arduino15\\packages\\esp8266\\tools\\python3\\3.7.2-post1/python3" -I "C:\\Users\\user\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\3.1.2/tools/signing.py" --mode header --publickey "C:\\Users\\user\\OneDrive\\One-Documents\\4-Arduino\\3 - Shades\\Smart_Pinnes_Home_V9/public.key" --out "C:\\Users\\user\\AppData\\Local\\Temp\\arduino\\sketches\\1A8A66D807C31ADBD86A6E79CF20C097/core/Updater_Signing.h" "C:\\Users\\user\\AppData\\Local\\Arduino15\\packages\\esp8266\\tools\\xtensa-lx106-elf-gcc\\3.1.0-gcc10.3-e5f9fec/bin/xtensa-lx106-elf-g++" -D __ets__ -DICACHE_FLASH -U __STRICT_ANSI__ -D_GNU_SOURCE -DESP8266 "@C:\\Users\\user\\AppData\\Local\\Temp\\arduino\\sketches\\1A8A66D807C31ADBD86A6E79CF20C097/core/build.opt" "-IC:\\Users\\user\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\3.1.2/tools/sdk/include" "-IC:\\Users\\user\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\3.1.2/tools/sdk/lwip2/include" "-IC:\\Users\\user\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\3.1.2/tools/sdk/libc/xtensa-lx106-elf/include" "-IC:\\Users\\user\\AppData\\Local\\Temp\\arduino\\sketches\\1A8A66D807C31ADBD86A6E79CF20C097/core" -c "@C:\\Users\\user\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\3.1.2/tools/warnings/none-cppflags" -Os -g -free -fipa-pta -Werror=return-type -mlongcalls -mtext-section-literals -fno-rtti -falign-functions=4 -std=gnu++17 -MMD -ffunction-sections -fdata-sections -fno-exceptions -DMMU_IRAM_SIZE=0x8000 -DMMU_ICACHE_SIZE=0x4000 -DMMU_SEC_HEAP=0x40108000 -DMMU_SEC_HEAP_SIZE=0x4000 -DNONOSDK22x_190703=1 -DF_CPU=80000000L -DLWIP_OPEN_SRC -DTCP_MSS=536 -DLWIP_FEATURES=1 -DLWIP_IPV6=0 -DARDUINO=10607 -DARDUINO_ESP8266_NODEMCU_ESP12E -DARDUINO_ARCH_ESP8266 "-DARDUINO_BOARD=\"ESP8266_NODEMCU_ESP12E\"" "-DARDUINO_BOARD_ID=\"nodemcuv2\"" -DLED_BUILTIN=2 -DFLASHMODE_DIO "-IC:\\Users\\user\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\3.1.2\\cores\\esp8266" "-IC:\\Users\\user\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\3.1.2\\variants\\nodemcu" "-IC:\\Users\\user\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\3.1.2\\libraries\\ESP8266WiFi\\src" "-Ic:\\Users\\user\\OneDrive\\One-Documents\\4-Arduino\\libraries\\ESPAsyncTCP-master\\src" "-Ic:\\Users\\user\\OneDrive\\One-Documents\\4-Arduino\\libraries\\ESP_Async_WebServer\\src" "-IC:\\Users\\user\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\3.1.2\\libraries\\Hash\\src" "-Ic:\\Users\\user\\OneDrive\\One-Documents\\4-Arduino\\libraries\\ElegantOTA\\src" "-IC:\\Users\\user\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\3.1.2\\libraries\\LittleFS\\src" "-IC:\\Users\\user\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\3.1.2\\libraries\\Wire" "-IC:\\Users\\user\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\3.1.2\\libraries\\EEPROM" "-IC:\\Users\\user\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\3.1.2\\libraries\\SPI" "-IC:\\Users\\user\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\3.1.2\\libraries\\SD\\src" "-IC:\\Users\\user\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\3.1.2\\libraries\\SDFS\\src" "-IC:\\Users\\user\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\3.1.2\\libraries\\ESP8266SdFat\\src" "-Ic:\\Users\\user\\OneDrive\\One-Documents\\4-Arduino\\libraries\\EMailSender-master" "C:\\Users\\user\\AppData\\Local\\Temp\\arduino\\sketches\\1A8A66D807C31ADBD86A6E79CF20C097\\sketch\\Smart_Pinnes_Home_V9.ino.cpp" -o "C:\\Users\\user\\AppData\\Local\\Temp\\arduino\\sketches\\1A8A66D807C31ADBD86A6E79CF20C097\\sketch\\Smart_Pinnes_Home_V9.ino.cpp.o" Compiling libraries... Compiling library "ESP8266WiFi" Using previously compiled file: C:\Users\user\AppData\Local\Temp\arduino\sketches\1A8A66D807C31ADBD86A6E79CF20C097\libraries\ESP8266WiFi\BearSSLHelpers.cpp.o Using previously compiled file: C:\Users\user\AppData\Local\Temp\arduino\sketches\1A8A66D807C31ADBD86A6E79CF20C097\libraries\ESP8266WiFi\CertStoreBearSSL.cpp.o Using previously compiled file: C:\Users\user\AppData\Local\Temp\arduino\sketches\1A8A66D807C31ADBD86A6E79CF20C097\libraries\ESP8266WiFi\enable_wifi_at_boot_time.cpp.o Using previously compiled file: C:\Users\user\AppData\Local\Temp\arduino\sketches\1A8A66D807C31ADBD86A6E79CF20C097\libraries\ESP8266WiFi\ESP8266WiFiGratuitous.cpp.o Using previously compiled file: C:\Users\user\AppData\Local\Temp\arduino\sketches\1A8A66D807C31ADBD86A6E79CF20C097\libraries\ESP8266WiFi\WiFiServerSecureBearSSL.cpp.o Using previously compiled file: C:\Users\user\AppData\Local\Temp\arduino\sketches\1A8A66D807C31ADBD86A6E79CF20C097\libraries\ESP8266WiFi\WiFiClientSecureBearSSL.cpp.o Using previously compiled file: C:\Users\user\AppData\Local\Temp\arduino\sketches\1A8A66D807C31ADBD86A6E79CF20C097\libraries\ESP8266WiFi\ESP8266WiFiScan.cpp.o Using previously compiled file: C:\Users\user\AppData\Local\Temp\arduino\sketches\1A8A66D807C31ADBD86A6E79CF20C097\libraries\ESP8266WiFi\ESP8266WiFiSTA.cpp.o Using previously compiled file: C:\Users\user\AppData\Local\Temp\arduino\sketches\1A8A66D807C31ADBD86A6E79CF20C097\libraries\ESP8266WiFi\ESP8266WiFi.cpp.o Using previously compiled file: C:\Users\user\AppData\Local\Temp\arduino\sketches\1A8A66D807C31ADBD86A6E79CF20C097\libraries\ESP8266WiFi\WiFiClient.cpp.o Using previously compiled file: C:\Users\user\AppData\Local\Temp\arduino\sketches\1A8A66D807C31ADBD86A6E79CF20C097\libraries\ESP8266WiFi\ESP8266WiFiMulti.cpp.o Using previously compiled file: C:\Users\user\AppData\Local\Temp\arduino\sketches\1A8A66D807C31ADBD86A6E79CF20C097\libraries\ESP8266WiFi\ESP8266WiFiSTA-WPS.cpp.o Using previously compiled file: C:\Users\user\AppData\Local\Temp\arduino\sketches\1A8A66D807C31ADBD86A6E79CF20C097\libraries\ESP8266WiFi\WiFiServer.cpp.o Using previously compiled file: C:\Users\user\AppData\Local\Temp\arduino\sketches\1A8A66D807C31ADBD86A6E79CF20C097\libraries\ESP8266WiFi\ESP8266WiFiAP.cpp.o Using previously compiled file: C:\Users\user\AppData\Local\Temp\arduino\sketches\1A8A66D807C31ADBD86A6E79CF20C097\libraries\ESP8266WiFi\WiFiUdp.cpp.o Using previously compiled file: C:\Users\user\AppData\Local\Temp\arduino\sketches\1A8A66D807C31ADBD86A6E79CF20C097\libraries\ESP8266WiFi\ESP8266WiFiGeneric.cpp.o Using previously compiled file: C:\Users\user\AppData\Local\Temp\arduino\sketches\1A8A66D807C31ADBD86A6E79CF20C097\libraries\ESP8266WiFi\ESP8266WiFi.a Compiling library "ESP AsyncTCP" Using previously compiled file: C:\Users\user\AppData\Local\Temp\arduino\sketches\1A8A66D807C31ADBD86A6E79CF20C097\libraries\ESPAsyncTCP-master\tcp_axtls.c.o Using previously compiled file: C:\Users\user\AppData\Local\Temp\arduino\sketches\1A8A66D807C31ADBD86A6E79CF20C097\libraries\ESPAsyncTCP-master\ESPAsyncTCPbuffer.cpp.o Using previously compiled file: C:\Users\user\AppData\Local\Temp\arduino\sketches\1A8A66D807C31ADBD86A6E79CF20C097\libraries\ESPAsyncTCP-master\SyncClient.cpp.o Using previously compiled file: C:\Users\user\AppData\Local\Temp\arduino\sketches\1A8A66D807C31ADBD86A6E79CF20C097\libraries\ESPAsyncTCP-master\AsyncPrinter.cpp.o Using previously compiled file: C:\Users\user\AppData\Local\Temp\arduino\sketches\1A8A66D807C31ADBD86A6E79CF20C097\libraries\ESPAsyncTCP-master\ESPAsyncTCP.cpp.o Compiling library "ESP Async WebServer" Using previously compiled file: C:\Users\user\AppData\Local\Temp\arduino\sketches\1A8A66D807C31ADBD86A6E79CF20C097\libraries\ESP_Async_WebServer\WebAuthentication.cpp.o Using previously compiled file: C:\Users\user\AppData\Local\Temp\arduino\sketches\1A8A66D807C31ADBD86A6E79CF20C097\libraries\ESP_Async_WebServer\WebRequest.cpp.o Using previously compiled file: C:\Users\user\AppData\Local\Temp\arduino\sketches\1A8A66D807C31ADBD86A6E79CF20C097\libraries\ESP_Async_WebServer\WebResponses.cpp.o Using previously compiled file: C:\Users\user\AppData\Local\Temp\arduino\sketches\1A8A66D807C31ADBD86A6E79CF20C097\libraries\ESP_Async_WebServer\AsyncEventSource.cpp.o Using previously compiled file: C:\Users\user\AppData\Local\Temp\arduino\sketches\1A8A66D807C31ADBD86A6E79CF20C097\libraries\ESP_Async_WebServer\WebHandlers.cpp.o Using previously compiled file: C:\Users\user\AppData\Local\Temp\arduino\sketches\1A8A66D807C31ADBD86A6E79CF20C097\libraries\ESP_Async_WebServer\WebServer.cpp.o Using previously compiled file: C:\Users\user\AppData\Local\Temp\arduino\sketches\1A8A66D807C31ADBD86A6E79CF20C097\libraries\ESP_Async_WebServer\AsyncWebSocket.cpp.o Compiling library "Hash" Using previously compiled file: C:\Users\user\AppData\Local\Temp\arduino\sketches\1A8A66D807C31ADBD86A6E79CF20C097\libraries\Hash\Hash.cpp.o Using previously compiled file: C:\Users\user\AppData\Local\Temp\arduino\sketches\1A8A66D807C31ADBD86A6E79CF20C097\libraries\Hash\Hash.a Compiling library "ElegantOTA" Using previously compiled file: C:\Users\user\AppData\Local\Temp\arduino\sketches\1A8A66D807C31ADBD86A6E79CF20C097\libraries\ElegantOTA\elop.cpp.o Using previously compiled file: C:\Users\user\AppData\Local\Temp\arduino\sketches\1A8A66D807C31ADBD86A6E79CF20C097\libraries\ElegantOTA\ElegantOTA.cpp.o Compiling library "LittleFS" Using previously compiled file: C:\Users\user\AppData\Local\Temp\arduino\sketches\1A8A66D807C31ADBD86A6E79CF20C097\libraries\LittleFS\lfs_util.c.o Using previously compiled file: C:\Users\user\AppData\Local\Temp\arduino\sketches\1A8A66D807C31ADBD86A6E79CF20C097\libraries\LittleFS\lfs.c.o Using previously compiled file: C:\Users\user\AppData\Local\Temp\arduino\sketches\1A8A66D807C31ADBD86A6E79CF20C097\libraries\LittleFS\LittleFS.cpp.o Using previously compiled file: C:\Users\user\AppData\Local\Temp\arduino\sketches\1A8A66D807C31ADBD86A6E79CF20C097\libraries\LittleFS\LittleFS.a Compiling library "Wire" Using previously compiled file: C:\Users\user\AppData\Local\Temp\arduino\sketches\1A8A66D807C31ADBD86A6E79CF20C097\libraries\Wire\Wire.cpp.o Compiling library "EEPROM" Using previously compiled file: C:\Users\user\AppData\Local\Temp\arduino\sketches\1A8A66D807C31ADBD86A6E79CF20C097\libraries\EEPROM\EEPROM.cpp.o Compiling library "SPI" Using previously compiled file: C:\Users\user\AppData\Local\Temp\arduino\sketches\1A8A66D807C31ADBD86A6E79CF20C097\libraries\SPI\SPI.cpp.o Compiling library "SD" Using previously compiled file: C:\Users\user\AppData\Local\Temp\arduino\sketches\1A8A66D807C31ADBD86A6E79CF20C097\libraries\SD\SD.cpp.o Using previously compiled file: C:\Users\user\AppData\Local\Temp\arduino\sketches\1A8A66D807C31ADBD86A6E79CF20C097\libraries\SD\SD.a Compiling library "SDFS" Using previously compiled file: C:\Users\user\AppData\Local\Temp\arduino\sketches\1A8A66D807C31ADBD86A6E79CF20C097\libraries\SDFS\SDFS.cpp.o Using previously compiled file: C:\Users\user\AppData\Local\Temp\arduino\sketches\1A8A66D807C31ADBD86A6E79CF20C097\libraries\SDFS\SDFS.a Compiling library "ESP8266SdFat" Using previously compiled file: C:\Users\user\AppData\Local\Temp\arduino\sketches\1A8A66D807C31ADBD86A6E79CF20C097\libraries\ESP8266SdFat\ExFatLib\ExFatDbg.cpp.o Using previously compiled file: C:\Users\user\AppData\Local\Temp\arduino\sketches\1A8A66D807C31ADBD86A6E79CF20C097\libraries\ESP8266SdFat\FatLib\FatPartition.cpp.o Using previously compiled file: C:\Users\user\AppData\Local\Temp\arduino\sketches\1A8A66D807C31ADBD86A6E79CF20C097\libraries\ESP8266SdFat\FatLib\FatFileLFN.cpp.o Using previously compiled file: C:\Users\user\AppData\Local\Temp\arduino\sketches\1A8A66D807C31ADBD86A6E79CF20C097\libraries\ESP8266SdFat\ExFatLib\ExFatVolume.cpp.o Using previously compiled file: C:\Users\user\AppData\Local\Temp\arduino\sketches\1A8A66D807C31ADBD86A6E79CF20C097\libraries\ESP8266SdFat\FatLib\FatFilePrint.cpp.o Using previously compiled file: C:\Users\user\AppData\Local\Temp\arduino\sketches\1A8A66D807C31ADBD86A6E79CF20C097\libraries\ESP8266SdFat\ExFatLib\ExFatFile.cpp.o Using previously compiled file: C:\Users\user\AppData\Local\Temp\arduino\sketches\1A8A66D807C31ADBD86A6E79CF20C097\libraries\ESP8266SdFat\ExFatLib\ExFatFilePrint.cpp.o Using previously compiled file: C:\Users\user\AppData\Local\Temp\arduino\sketches\1A8A66D807C31ADBD86A6E79CF20C097\libraries\ESP8266SdFat\FsLib\FsNew.cpp.o Using previously compiled file: C:\Users\user\AppData\Local\Temp\arduino\sketches\1A8A66D807C31ADBD86A6E79CF20C097\libraries\ESP8266SdFat\ExFatLib\ExFatFileWrite.cpp.o Using previously compiled file: C:\Users\user\AppData\Local\Temp\arduino\sketches\1A8A66D807C31ADBD86A6E79CF20C097\libraries\ESP8266SdFat\ExFatLib\ExFatPartition.cpp.o Using previously compiled file: C:\Users\user\AppData\Local\Temp\arduino\sketches\1A8A66D807C31ADBD86A6E79CF20C097\libraries\ESP8266SdFat\FatLib\FatDbg.cpp.o Using previously compiled file: C:\Users\user\AppData\Local\Temp\arduino\sketches\1A8A66D807C31ADBD86A6E79CF20C097\libraries\ESP8266SdFat\FatLib\FatFile.cpp.o Using previously compiled file: C:\Users\user\AppData\Local\Temp\arduino\sketches\1A8A66D807C31ADBD86A6E79CF20C097\libraries\ESP8266SdFat\FatLib\FatFormatter.cpp.o Using previously compiled file: C:\Users\user\AppData\Local\Temp\arduino\sketches\1A8A66D807C31ADBD86A6E79CF20C097\libraries\ESP8266SdFat\FatLib\FatFileSFN.cpp.o Using previously compiled file: C:\Users\user\AppData\Local\Temp\arduino\sketches\1A8A66D807C31ADBD86A6E79CF20C097\libraries\ESP8266SdFat\SdCard\SdioTeensy.cpp.o Using previously compiled file: C:\Users\user\AppData\Local\Temp\arduino\sketches\1A8A66D807C31ADBD86A6E79CF20C097\libraries\ESP8266SdFat\FatLib\FatName.cpp.o Using previously compiled file: C:\Users\user\AppData\Local\Temp\arduino\sketches\1A8A66D807C31ADBD86A6E79CF20C097\libraries\ESP8266SdFat\ExFatLib\ExFatFormatter.cpp.o Using previously compiled file: C:\Users\user\AppData\Local\Temp\arduino\sketches\1A8A66D807C31ADBD86A6E79CF20C097\libraries\ESP8266SdFat\ExFatLib\ExFatName.cpp.o Using previously compiled file: C:\Users\user\AppData\Local\Temp\arduino\sketches\1A8A66D807C31ADBD86A6E79CF20C097\libraries\ESP8266SdFat\FreeStack.cpp.o Using previously compiled file: C:\Users\user\AppData\Local\Temp\arduino\sketches\1A8A66D807C31ADBD86A6E79CF20C097\libraries\ESP8266SdFat\FatLib\FatVolume.cpp.o Using previously compiled file: C:\Users\user\AppData\Local\Temp\arduino\sketches\1A8A66D807C31ADBD86A6E79CF20C097\libraries\ESP8266SdFat\MinimumSerial.cpp.o Using previously compiled file: C:\Users\user\AppData\Local\Temp\arduino\sketches\1A8A66D807C31ADBD86A6E79CF20C097\libraries\ESP8266SdFat\common\FmtNumber.cpp.o Using previously compiled file: C:\Users\user\AppData\Local\Temp\arduino\sketches\1A8A66D807C31ADBD86A6E79CF20C097\libraries\ESP8266SdFat\SdCard\SdCardInfo.cpp.o Using previously compiled file: C:\Users\user\AppData\Local\Temp\arduino\sketches\1A8A66D807C31ADBD86A6E79CF20C097\libraries\ESP8266SdFat\FsLib\FsFile.cpp.o Using previously compiled file: C:\Users\user\AppData\Local\Temp\arduino\sketches\1A8A66D807C31ADBD86A6E79CF20C097\libraries\ESP8266SdFat\SpiDriver\SdSpiArtemis.cpp.o Using previously compiled file: C:\Users\user\AppData\Local\Temp\arduino\sketches\1A8A66D807C31ADBD86A6E79CF20C097\libraries\ESP8266SdFat\common\FsStructs.cpp.o Using previously compiled file: C:\Users\user\AppData\Local\Temp\arduino\sketches\1A8A66D807C31ADBD86A6E79CF20C097\libraries\ESP8266SdFat\common\FsUtf.cpp.o Using previously compiled file: C:\Users\user\AppData\Local\Temp\arduino\sketches\1A8A66D807C31ADBD86A6E79CF20C097\libraries\ESP8266SdFat\FsLib\FsVolume.cpp.o Using previously compiled file: C:\Users\user\AppData\Local\Temp\arduino\sketches\1A8A66D807C31ADBD86A6E79CF20C097\libraries\ESP8266SdFat\common\upcase.cpp.o Using previously compiled file: C:\Users\user\AppData\Local\Temp\arduino\sketches\1A8A66D807C31ADBD86A6E79CF20C097\libraries\ESP8266SdFat\SpiDriver\SdSpiChipSelect.cpp.o Using previously compiled file: C:\Users\user\AppData\Local\Temp\arduino\sketches\1A8A66D807C31ADBD86A6E79CF20C097\libraries\ESP8266SdFat\SpiDriver\SdSpiDue.cpp.o Using previously compiled file: C:\Users\user\AppData\Local\Temp\arduino\sketches\1A8A66D807C31ADBD86A6E79CF20C097\libraries\ESP8266SdFat\SpiDriver\SdSpiParticle.cpp.o Using previously compiled file: C:\Users\user\AppData\Local\Temp\arduino\sketches\1A8A66D807C31ADBD86A6E79CF20C097\libraries\ESP8266SdFat\SdCard\SdSpiCard.cpp.o Using previously compiled file: C:\Users\user\AppData\Local\Temp\arduino\sketches\1A8A66D807C31ADBD86A6E79CF20C097\libraries\ESP8266SdFat\SpiDriver\SdSpiSTM32.cpp.o Using previously compiled file: C:\Users\user\AppData\Local\Temp\arduino\sketches\1A8A66D807C31ADBD86A6E79CF20C097\libraries\ESP8266SdFat\SpiDriver\SdSpiTeensy3.cpp.o Using previously compiled file: C:\Users\user\AppData\Local\Temp\arduino\sketches\1A8A66D807C31ADBD86A6E79CF20C097\libraries\ESP8266SdFat\SpiDriver\SdSpiESP.cpp.o Using previously compiled file: C:\Users\user\AppData\Local\Temp\arduino\sketches\1A8A66D807C31ADBD86A6E79CF20C097\libraries\ESP8266SdFat\SpiDriver\SdSpiSTM32Core.cpp.o Using previously compiled file: C:\Users\user\AppData\Local\Temp\arduino\sketches\1A8A66D807C31ADBD86A6E79CF20C097\libraries\ESP8266SdFat\common\FsDateTime.cpp.o Using previously compiled file: C:\Users\user\AppData\Local\Temp\arduino\sketches\1A8A66D807C31ADBD86A6E79CF20C097\libraries\ESP8266SdFat\common\FsName.cpp.o Using previously compiled file: C:\Users\user\AppData\Local\Temp\arduino\sketches\1A8A66D807C31ADBD86A6E79CF20C097\libraries\ESP8266SdFat\common\FsCache.cpp.o Using previously compiled file: C:\Users\user\AppData\Local\Temp\arduino\sketches\1A8A66D807C31ADBD86A6E79CF20C097\libraries\ESP8266SdFat\iostream\StdioStream.cpp.o Using previously compiled file: C:\Users\user\AppData\Local\Temp\arduino\sketches\1A8A66D807C31ADBD86A6E79CF20C097\libraries\ESP8266SdFat\iostream\StreamBaseClass.cpp.o Using previously compiled file: C:\Users\user\AppData\Local\Temp\arduino\sketches\1A8A66D807C31ADBD86A6E79CF20C097\libraries\ESP8266SdFat\iostream\istream.cpp.o Using previously compiled file: C:\Users\user\AppData\Local\Temp\arduino\sketches\1A8A66D807C31ADBD86A6E79CF20C097\libraries\ESP8266SdFat\iostream\ostream.cpp.o Compiling library "EMailSender" Using previously compiled file: C:\Users\user\AppData\Local\Temp\arduino\sketches\1A8A66D807C31ADBD86A6E79CF20C097\libraries\EMailSender-master\EMailSender.cpp.o Compiling core... Using precompiled core: C:\Users\user\AppData\Local\Temp\arduino\cores\ff0b283a7ffa5eaf110787066e967fa4\core.a Linking everything together... "C:\\Users\\user\\AppData\\Local\\Arduino15\\packages\\esp8266\\tools\\python3\\3.7.2-post1/python3" -I "C:\\Users\\user\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\3.1.2/tools/mkdir.py" -p "C:\\Users\\user\\AppData\\Local\\Temp\\arduino\\sketches\\1A8A66D807C31ADBD86A6E79CF20C097/ld_h/" "C:\\Users\\user\\AppData\\Local\\Arduino15\\packages\\esp8266\\tools\\python3\\3.7.2-post1/python3" -I "C:\\Users\\user\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\3.1.2/tools/cp.py" "C:\\Users\\user\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\3.1.2/tools/sdk/ld/eagle.flash.4m2m.ld" "C:\\Users\\user\\AppData\\Local\\Temp\\arduino\\sketches\\1A8A66D807C31ADBD86A6E79CF20C097/ld_h/local.eagle.flash.ld.h" "C:\\Users\\user\\AppData\\Local\\Arduino15\\packages\\esp8266\\tools\\xtensa-lx106-elf-gcc\\3.1.0-gcc10.3-e5f9fec/bin/xtensa-lx106-elf-gcc" -CC -E -P -DVTABLES_IN_FLASH -DMMU_IRAM_SIZE=0x8000 -DMMU_ICACHE_SIZE=0x4000 -DMMU_SEC_HEAP=0x40108000 -DMMU_SEC_HEAP_SIZE=0x4000 "C:\\Users\\user\\AppData\\Local\\Temp\\arduino\\sketches\\1A8A66D807C31ADBD86A6E79CF20C097/ld_h/local.eagle.flash.ld.h" -o "C:\\Users\\user\\AppData\\Local\\Temp\\arduino\\sketches\\1A8A66D807C31ADBD86A6E79CF20C097/local.eagle.flash.ld" "C:\\Users\\user\\AppData\\Local\\Arduino15\\packages\\esp8266\\tools\\xtensa-lx106-elf-gcc\\3.1.0-gcc10.3-e5f9fec/bin/xtensa-lx106-elf-gcc" -CC -E -P -DVTABLES_IN_FLASH -DMMU_IRAM_SIZE=0x8000 -DMMU_ICACHE_SIZE=0x4000 -DMMU_SEC_HEAP=0x40108000 -DMMU_SEC_HEAP_SIZE=0x4000 "C:\\Users\\user\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\3.1.2/tools/sdk/ld/eagle.app.v6.common.ld.h" -o "C:\\Users\\user\\AppData\\Local\\Temp\\arduino\\sketches\\1A8A66D807C31ADBD86A6E79CF20C097/local.eagle.app.v6.common.ld" "C:\\Users\\user\\AppData\\Local\\Arduino15\\packages\\esp8266\\tools\\xtensa-lx106-elf-gcc\\3.1.0-gcc10.3-e5f9fec/bin/xtensa-lx106-elf-gcc" -fno-exceptions -Wl,-Map "-Wl,C:\\Users\\user\\AppData\\Local\\Temp\\arduino\\sketches\\1A8A66D807C31ADBD86A6E79CF20C097/Smart_Pinnes_Home_V9.ino.map" -g "@C:\\Users\\user\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\3.1.2/tools/warnings/none-cflags" -Os -nostdlib -Wl,--no-check-sections -u app_entry -u _printf_float -u _scanf_float -Wl,-static "-LC:\\Users\\user\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\3.1.2/tools/sdk/lib" "-LC:\\Users\\user\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\3.1.2/tools/sdk/lib/NONOSDK22x_190703" "-LC:\\Users\\user\\AppData\\Local\\Temp\\arduino\\sketches\\1A8A66D807C31ADBD86A6E79CF20C097" "-LC:\\Users\\user\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\3.1.2/tools/sdk/libc/xtensa-lx106-elf/lib" -Tlocal.eagle.flash.ld -Wl,--gc-sections -Wl,-wrap,system_restart_local -Wl,-wrap,spi_flash_read -o "C:\\Users\\user\\AppData\\Local\\Temp\\arduino\\sketches\\1A8A66D807C31ADBD86A6E79CF20C097/Smart_Pinnes_Home_V9.ino.elf" -Wl,--start-group "C:\\Users\\user\\AppData\\Local\\Temp\\arduino\\sketches\\1A8A66D807C31ADBD86A6E79CF20C097\\sketch\\Smart_Pinnes_Home_V9.ino.cpp.o" "C:\\Users\\user\\AppData\\Local\\Temp\\arduino\\sketches\\1A8A66D807C31ADBD86A6E79CF20C097\\libraries\\ESP8266WiFi\\ESP8266WiFi.a" "C:\\Users\\user\\AppData\\Local\\Temp\\arduino\\sketches\\1A8A66D807C31ADBD86A6E79CF20C097\\libraries\\ESPAsyncTCP-master\\AsyncPrinter.cpp.o" "C:\\Users\\user\\AppData\\Local\\Temp\\arduino\\sketches\\1A8A66D807C31ADBD86A6E79CF20C097\\libraries\\ESPAsyncTCP-master\\ESPAsyncTCP.cpp.o" "C:\\Users\\user\\AppData\\Local\\Temp\\arduino\\sketches\\1A8A66D807C31ADBD86A6E79CF20C097\\libraries\\ESPAsyncTCP-master\\ESPAsyncTCPbuffer.cpp.o" "C:\\Users\\user\\AppData\\Local\\Temp\\arduino\\sketches\\1A8A66D807C31ADBD86A6E79CF20C097\\libraries\\ESPAsyncTCP-master\\SyncClient.cpp.o" "C:\\Users\\user\\AppData\\Local\\Temp\\arduino\\sketches\\1A8A66D807C31ADBD86A6E79CF20C097\\libraries\\ESPAsyncTCP-master\\tcp_axtls.c.o" "C:\\Users\\user\\AppData\\Local\\Temp\\arduino\\sketches\\1A8A66D807C31ADBD86A6E79CF20C097\\libraries\\ESP_Async_WebServer\\AsyncEventSource.cpp.o" "C:\\Users\\user\\AppData\\Local\\Temp\\arduino\\sketches\\1A8A66D807C31ADBD86A6E79CF20C097\\libraries\\ESP_Async_WebServer\\AsyncWebSocket.cpp.o" "C:\\Users\\user\\AppData\\Local\\Temp\\arduino\\sketches\\1A8A66D807C31ADBD86A6E79CF20C097\\libraries\\ESP_Async_WebServer\\WebAuthentication.cpp.o" "C:\\Users\\user\\AppData\\Local\\Temp\\arduino\\sketches\\1A8A66D807C31ADBD86A6E79CF20C097\\libraries\\ESP_Async_WebServer\\WebHandlers.cpp.o" "C:\\Users\\user\\AppData\\Local\\Temp\\arduino\\sketches\\1A8A66D807C31ADBD86A6E79CF20C097\\libraries\\ESP_Async_WebServer\\WebRequest.cpp.o" "C:\\Users\\user\\AppData\\Local\\Temp\\arduino\\sketches\\1A8A66D807C31ADBD86A6E79CF20C097\\libraries\\ESP_Async_WebServer\\WebResponses.cpp.o" "C:\\Users\\user\\AppData\\Local\\Temp\\arduino\\sketches\\1A8A66D807C31ADBD86A6E79CF20C097\\libraries\\ESP_Async_WebServer\\WebServer.cpp.o" "C:\\Users\\user\\AppData\\Local\\Temp\\arduino\\sketches\\1A8A66D807C31ADBD86A6E79CF20C097\\libraries\\Hash\\Hash.a" "C:\\Users\\user\\AppData\\Local\\Temp\\arduino\\sketches\\1A8A66D807C31ADBD86A6E79CF20C097\\libraries\\ElegantOTA\\ElegantOTA.cpp.o" "C:\\Users\\user\\AppData\\Local\\Temp\\arduino\\sketches\\1A8A66D807C31ADBD86A6E79CF20C097\\libraries\\ElegantOTA\\elop.cpp.o" "C:\\Users\\user\\AppData\\Local\\Temp\\arduino\\sketches\\1A8A66D807C31ADBD86A6E79CF20C097\\libraries\\LittleFS\\LittleFS.a" "C:\\Users\\user\\AppData\\Local\\Temp\\arduino\\sketches\\1A8A66D807C31ADBD86A6E79CF20C097\\libraries\\Wire\\Wire.cpp.o" "C:\\Users\\user\\AppData\\Local\\Temp\\arduino\\sketches\\1A8A66D807C31ADBD86A6E79CF20C097\\libraries\\EEPROM\\EEPROM.cpp.o" "C:\\Users\\user\\AppData\\Local\\Temp\\arduino\\sketches\\1A8A66D807C31ADBD86A6E79CF20C097\\libraries\\SPI\\SPI.cpp.o" "C:\\Users\\user\\AppData\\Local\\Temp\\arduino\\sketches\\1A8A66D807C31ADBD86A6E79CF20C097\\libraries\\SD\\SD.a" "C:\\Users\\user\\AppData\\Local\\Temp\\arduino\\sketches\\1A8A66D807C31ADBD86A6E79CF20C097\\libraries\\SDFS\\SDFS.a" "C:\\Users\\user\\AppData\\Local\\Temp\\arduino\\sketches\\1A8A66D807C31ADBD86A6E79CF20C097\\libraries\\ESP8266SdFat\\ExFatLib\\ExFatDbg.cpp.o" "C:\\Users\\user\\AppData\\Local\\Temp\\arduino\\sketches\\1A8A66D807C31ADBD86A6E79CF20C097\\libraries\\ESP8266SdFat\\ExFatLib\\ExFatFile.cpp.o" "C:\\Users\\user\\AppData\\Local\\Temp\\arduino\\sketches\\1A8A66D807C31ADBD86A6E79CF20C097\\libraries\\ESP8266SdFat\\ExFatLib\\ExFatFilePrint.cpp.o" "C:\\Users\\user\\AppData\\Local\\Temp\\arduino\\sketches\\1A8A66D807C31ADBD86A6E79CF20C097\\libraries\\ESP8266SdFat\\ExFatLib\\ExFatFileWrite.cpp.o" "C:\\Users\\user\\AppData\\Local\\Temp\\arduino\\sketches\\1A8A66D807C31ADBD86A6E79CF20C097\\libraries\\ESP8266SdFat\\ExFatLib\\ExFatFormatter.cpp.o" "C:\\Users\\user\\AppData\\Local\\Temp\\arduino\\sketches\\1A8A66D807C31ADBD86A6E79CF20C097\\libraries\\ESP8266SdFat\\ExFatLib\\ExFatName.cpp.o" "C:\\Users\\user\\AppData\\Local\\Temp\\arduino\\sketches\\1A8A66D807C31ADBD86A6E79CF20C097\\libraries\\ESP8266SdFat\\ExFatLib\\ExFatPartition.cpp.o" "C:\\Users\\user\\AppData\\Local\\Temp\\arduino\\sketches\\1A8A66D807C31ADBD86A6E79CF20C097\\libraries\\ESP8266SdFat\\ExFatLib\\ExFatVolume.cpp.o" "C:\\Users\\user\\AppData\\Local\\Temp\\arduino\\sketches\\1A8A66D807C31ADBD86A6E79CF20C097\\libraries\\ESP8266SdFat\\FatLib\\FatDbg.cpp.o" "C:\\Users\\user\\AppData\\Local\\Temp\\arduino\\sketches\\1A8A66D807C31ADBD86A6E79CF20C097\\libraries\\ESP8266SdFat\\FatLib\\FatFile.cpp.o" "C:\\Users\\user\\AppData\\Local\\Temp\\arduino\\sketches\\1A8A66D807C31ADBD86A6E79CF20C097\\libraries\\ESP8266SdFat\\FatLib\\FatFileLFN.cpp.o" "C:\\Users\\user\\AppData\\Local\\Temp\\arduino\\sketches\\1A8A66D807C31ADBD86A6E79CF20C097\\libraries\\ESP8266SdFat\\FatLib\\FatFilePrint.cpp.o" "C:\\Users\\user\\AppData\\Local\\Temp\\arduino\\sketches\\1A8A66D807C31ADBD86A6E79CF20C097\\libraries\\ESP8266SdFat\\FatLib\\FatFileSFN.cpp.o" "C:\\Users\\user\\AppData\\Local\\Temp\\arduino\\sketches\\1A8A66D807C31ADBD86A6E79CF20C097\\libraries\\ESP8266SdFat\\FatLib\\FatFormatter.cpp.o" "C:\\Users\\user\\AppData\\Local\\Temp\\arduino\\sketches\\1A8A66D807C31ADBD86A6E79CF20C097\\libraries\\ESP8266SdFat\\FatLib\\FatName.cpp.o" "C:\\Users\\user\\AppData\\Local\\Temp\\arduino\\sketches\\1A8A66D807C31ADBD86A6E79CF20C097\\libraries\\ESP8266SdFat\\FatLib\\FatPartition.cpp.o" "C:\\Users\\user\\AppData\\Local\\Temp\\arduino\\sketches\\1A8A66D807C31ADBD86A6E79CF20C097\\libraries\\ESP8266SdFat\\FatLib\\FatVolume.cpp.o" "C:\\Users\\user\\AppData\\Local\\Temp\\arduino\\sketches\\1A8A66D807C31ADBD86A6E79CF20C097\\libraries\\ESP8266SdFat\\FreeStack.cpp.o" "C:\\Users\\user\\AppData\\Local\\Temp\\arduino\\sketches\\1A8A66D807C31ADBD86A6E79CF20C097\\libraries\\ESP8266SdFat\\FsLib\\FsFile.cpp.o" "C:\\Users\\user\\AppData\\Local\\Temp\\arduino\\sketches\\1A8A66D807C31ADBD86A6E79CF20C097\\libraries\\ESP8266SdFat\\FsLib\\FsNew.cpp.o" "C:\\Users\\user\\AppData\\Local\\Temp\\arduino\\sketches\\1A8A66D807C31ADBD86A6E79CF20C097\\libraries\\ESP8266SdFat\\FsLib\\FsVolume.cpp.o" "C:\\Users\\user\\AppData\\Local\\Temp\\arduino\\sketches\\1A8A66D807C31ADBD86A6E79CF20C097\\libraries\\ESP8266SdFat\\MinimumSerial.cpp.o" "C:\\Users\\user\\AppData\\Local\\Temp\\arduino\\sketches\\1A8A66D807C31ADBD86A6E79CF20C097\\libraries\\ESP8266SdFat\\SdCard\\SdCardInfo.cpp.o" "C:\\Users\\user\\AppData\\Local\\Temp\\arduino\\sketches\\1A8A66D807C31ADBD86A6E79CF20C097\\libraries\\ESP8266SdFat\\SdCard\\SdSpiCard.cpp.o" "C:\\Users\\user\\AppData\\Local\\Temp\\arduino\\sketches\\1A8A66D807C31ADBD86A6E79CF20C097\\libraries\\ESP8266SdFat\\SdCard\\SdioTeensy.cpp.o" "C:\\Users\\user\\AppData\\Local\\Temp\\arduino\\sketches\\1A8A66D807C31ADBD86A6E79CF20C097\\libraries\\ESP8266SdFat\\SpiDriver\\SdSpiArtemis.cpp.o" "C:\\Users\\user\\AppData\\Local\\Temp\\arduino\\sketches\\1A8A66D807C31ADBD86A6E79CF20C097\\libraries\\ESP8266SdFat\\SpiDriver\\SdSpiChipSelect.cpp.o" "C:\\Users\\user\\AppData\\Local\\Temp\\arduino\\sketches\\1A8A66D807C31ADBD86A6E79CF20C097\\libraries\\ESP8266SdFat\\SpiDriver\\SdSpiDue.cpp.o" "C:\\Users\\user\\AppData\\Local\\Temp\\arduino\\sketches\\1A8A66D807C31ADBD86A6E79CF20C097\\libraries\\ESP8266SdFat\\SpiDriver\\SdSpiESP.cpp.o" "C:\\Users\\user\\AppData\\Local\\Temp\\arduino\\sketches\\1A8A66D807C31ADBD86A6E79CF20C097\\libraries\\ESP8266SdFat\\SpiDriver\\SdSpiParticle.cpp.o" "C:\\Users\\user\\AppData\\Local\\Temp\\arduino\\sketches\\1A8A66D807C31ADBD86A6E79CF20C097\\libraries\\ESP8266SdFat\\SpiDriver\\SdSpiSTM32.cpp.o" "C:\\Users\\user\\AppData\\Local\\Temp\\arduino\\sketches\\1A8A66D807C31ADBD86A6E79CF20C097\\libraries\\ESP8266SdFat\\SpiDriver\\SdSpiSTM32Core.cpp.o" "C:\\Users\\user\\AppData\\Local\\Temp\\arduino\\sketches\\1A8A66D807C31ADBD86A6E79CF20C097\\libraries\\ESP8266SdFat\\SpiDriver\\SdSpiTeensy3.cpp.o" "C:\\Users\\user\\AppData\\Local\\Temp\\arduino\\sketches\\1A8A66D807C31ADBD86A6E79CF20C097\\libraries\\ESP8266SdFat\\common\\FmtNumber.cpp.o" "C:\\Users\\user\\AppData\\Local\\Temp\\arduino\\sketches\\1A8A66D807C31ADBD86A6E79CF20C097\\libraries\\ESP8266SdFat\\common\\FsCache.cpp.o" "C:\\Users\\user\\AppData\\Local\\Temp\\arduino\\sketches\\1A8A66D807C31ADBD86A6E79CF20C097\\libraries\\ESP8266SdFat\\common\\FsDateTime.cpp.o" "C:\\Users\\user\\AppData\\Local\\Temp\\arduino\\sketches\\1A8A66D807C31ADBD86A6E79CF20C097\\libraries\\ESP8266SdFat\\common\\FsName.cpp.o" "C:\\Users\\user\\AppData\\Local\\Temp\\arduino\\sketches\\1A8A66D807C31ADBD86A6E79CF20C097\\libraries\\ESP8266SdFat\\common\\FsStructs.cpp.o" "C:\\Users\\user\\AppData\\Local\\Temp\\arduino\\sketches\\1A8A66D807C31ADBD86A6E79CF20C097\\libraries\\ESP8266SdFat\\common\\FsUtf.cpp.o" "C:\\Users\\user\\AppData\\Local\\Temp\\arduino\\sketches\\1A8A66D807C31ADBD86A6E79CF20C097\\libraries\\ESP8266SdFat\\common\\upcase.cpp.o" "C:\\Users\\user\\AppData\\Local\\Temp\\arduino\\sketches\\1A8A66D807C31ADBD86A6E79CF20C097\\libraries\\ESP8266SdFat\\iostream\\StdioStream.cpp.o" "C:\\Users\\user\\AppData\\Local\\Temp\\arduino\\sketches\\1A8A66D807C31ADBD86A6E79CF20C097\\libraries\\ESP8266SdFat\\iostream\\StreamBaseClass.cpp.o" "C:\\Users\\user\\AppData\\Local\\Temp\\arduino\\sketches\\1A8A66D807C31ADBD86A6E79CF20C097\\libraries\\ESP8266SdFat\\iostream\\istream.cpp.o" "C:\\Users\\user\\AppData\\Local\\Temp\\arduino\\sketches\\1A8A66D807C31ADBD86A6E79CF20C097\\libraries\\ESP8266SdFat\\iostream\\ostream.cpp.o" "C:\\Users\\user\\AppData\\Local\\Temp\\arduino\\sketches\\1A8A66D807C31ADBD86A6E79CF20C097\\libraries\\EMailSender-master\\EMailSender.cpp.o" "C:\\Users\\user\\AppData\\Local\\Temp\\arduino\\cores\\ff0b283a7ffa5eaf110787066e967fa4\\core.a" -lhal -lphy -lpp -lnet80211 -llwip2-536-feat -lwpa -lcrypto -lmain -lwps -lbearssl -lespnow -lsmartconfig -lairkiss -lwpa2 -lstdc++ -lm -lc -lgcc -Wl,--end-group "-LC:\\Users\\user\\AppData\\Local\\Temp\\arduino\\sketches\\1A8A66D807C31ADBD86A6E79CF20C097" "C:\\Users\\user\\AppData\\Local\\Arduino15\\packages\\esp8266\\tools\\python3\\3.7.2-post1/python3" -I "C:\\Users\\user\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\3.1.2/tools/elf2bin.py" --eboot "C:\\Users\\user\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\3.1.2/bootloaders/eboot/eboot.elf" --app "C:\\Users\\user\\AppData\\Local\\Temp\\arduino\\sketches\\1A8A66D807C31ADBD86A6E79CF20C097/Smart_Pinnes_Home_V9.ino.elf" --flash_mode dio --flash_freq 40 --flash_size 4M --path "C:\\Users\\user\\AppData\\Local\\Arduino15\\packages\\esp8266\\tools\\xtensa-lx106-elf-gcc\\3.1.0-gcc10.3-e5f9fec/bin" --out "C:\\Users\\user\\AppData\\Local\\Temp\\arduino\\sketches\\1A8A66D807C31ADBD86A6E79CF20C097/Smart_Pinnes_Home_V9.ino.bin" Creating BIN file "C:\Users\user\AppData\Local\Temp\arduino\sketches\1A8A66D807C31ADBD86A6E79CF20C097/Smart_Pinnes_Home_V9.ino.bin" using "C:\Users\user\AppData\Local\Arduino15\packages\esp8266\hardware\esp8266\3.1.2/bootloaders/eboot/eboot.elf" and "C:\Users\user\AppData\Local\Temp\arduino\sketches\1A8A66D807C31ADBD86A6E79CF20C097/Smart_Pinnes_Home_V9.ino.elf" "C:\\Users\\user\\AppData\\Local\\Arduino15\\packages\\esp8266\\tools\\python3\\3.7.2-post1/python3" -I "C:\\Users\\user\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\3.1.2/tools/signing.py" --mode sign --privatekey "C:\\Users\\user\\OneDrive\\One-Documents\\4-Arduino\\3 - Shades\\Smart_Pinnes_Home_V9/private.key" --bin "C:\\Users\\user\\AppData\\Local\\Temp\\arduino\\sketches\\1A8A66D807C31ADBD86A6E79CF20C097/Smart_Pinnes_Home_V9.ino.bin" --out "C:\\Users\\user\\AppData\\Local\\Temp\\arduino\\sketches\\1A8A66D807C31ADBD86A6E79CF20C097/Smart_Pinnes_Home_V9.ino.bin.signed" --legacy "C:\\Users\\user\\AppData\\Local\\Temp\\arduino\\sketches\\1A8A66D807C31ADBD86A6E79CF20C097/Smart_Pinnes_Home_V9.ino.bin.legacy_sig" "C:\\Users\\user\\AppData\\Local\\Arduino15\\packages\\esp8266\\tools\\python3\\3.7.2-post1/python3" -X utf8 -I "C:\\Users\\user\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\3.1.2/tools/sizes.py" --elf "C:\\Users\\user\\AppData\\Local\\Temp\\arduino\\sketches\\1A8A66D807C31ADBD86A6E79CF20C097/Smart_Pinnes_Home_V9.ino.elf" --path "C:\\Users\\user\\AppData\\Local\\Arduino15\\packages\\esp8266\\tools\\xtensa-lx106-elf-gcc\\3.1.0-gcc10.3-e5f9fec/bin" --mmu "-DMMU_IRAM_SIZE=0x8000 -DMMU_ICACHE_SIZE=0x4000 -DMMU_SEC_HEAP=0x40108000 -DMMU_SEC_HEAP_SIZE=0x4000" . Variables and constants in RAM (global, static), used 39964 / 80192 bytes (49%) ║ SEGMENT BYTES DESCRIPTION ╠══ DATA 3564 initialized variables ╠══ RODATA 3856 constants ╚══ BSS 32544 zeroed variables . Instruction RAM (IRAM_ATTR, ICACHE_RAM_ATTR), used 61675 / 65536 bytes (94%) ║ SEGMENT BYTES DESCRIPTION ╠══ ICACHE 16384 reserved space for flash instruction cache ╠══ IHEAP 16384 secondary heap space ╚══ IRAM 28907 code in IRAM . Code in flash (default, ICACHE_FLASH_ATTR), used 412224 / 1048576 bytes (39%) ║ SEGMENT BYTES DESCRIPTION ╚══ IROM 412224 code in flash Multiple libraries were found for "SD.h" Used: C:\Users\user\AppData\Local\Arduino15\packages\esp8266\hardware\esp8266\3.1.2\libraries\SD Not used: C:\Users\user\AppData\Local\Arduino15\libraries\oldSD Using library ESP8266WiFi at version 1.0 in folder: C:\Users\user\AppData\Local\Arduino15\packages\esp8266\hardware\esp8266\3.1.2\libraries\ESP8266WiFi Using library ESP AsyncTCP at version 1.2.2 in folder: C:\Users\user\OneDrive\One-Documents\4-Arduino\libraries\ESPAsyncTCP-master Using library ESP Async WebServer at version 2.7.0 in folder: C:\Users\user\OneDrive\One-Documents\4-Arduino\libraries\ESP_Async_WebServer Using library Hash at version 1.0 in folder: C:\Users\user\AppData\Local\Arduino15\packages\esp8266\hardware\esp8266\3.1.2\libraries\Hash Using library ElegantOTA at version 3.1.0 in folder: C:\Users\user\OneDrive\One-Documents\4-Arduino\libraries\ElegantOTA Using library LittleFS at version 0.1.0 in folder: C:\Users\user\AppData\Local\Arduino15\packages\esp8266\hardware\esp8266\3.1.2\libraries\LittleFS Using library Wire at version 1.0 in folder: C:\Users\user\AppData\Local\Arduino15\packages\esp8266\hardware\esp8266\3.1.2\libraries\Wire Using library EEPROM at version 1.0 in folder: C:\Users\user\AppData\Local\Arduino15\packages\esp8266\hardware\esp8266\3.1.2\libraries\EEPROM Using library SPI at version 1.0 in folder: C:\Users\user\AppData\Local\Arduino15\packages\esp8266\hardware\esp8266\3.1.2\libraries\SPI Using library SD at version 2.0.0 in folder: C:\Users\user\AppData\Local\Arduino15\packages\esp8266\hardware\esp8266\3.1.2\libraries\SD Using library SDFS at version 0.1.0 in folder: C:\Users\user\AppData\Local\Arduino15\packages\esp8266\hardware\esp8266\3.1.2\libraries\SDFS Using library ESP8266SdFat at version 2.1.1 in folder: C:\Users\user\AppData\Local\Arduino15\packages\esp8266\hardware\esp8266\3.1.2\libraries\ESP8266SdFat Using library EMailSender at version 3.0.13 in folder: C:\Users\user\OneDrive\One-Documents\4-Arduino\libraries\EMailSender-master ``` ---
**Author:** ![ptillisch](https://avatars.discourse-cdn.com/v4/letter/p/ad7895/32.png) [@ptillisch](https://forum.arduino.cc/u/ptillisch)\ **Post date:** [February 19, 2024, 4:44pm UTC](https://forum.arduino.cc/t/arduino-ide-2-3-1-crashes-esp8266/1225801/10 "2024-02-19T16:44:07Z")
> [@Sachig](#): > > There is no error on the compilation and the code is uploaded to the ESP8266. Understood. I copied the wrong set of instructions. I apologize for any confusion. > [@Sachig](#): > > ```plaintext > FQBN: esp8266:esp8266:nodemcuv2:mmu=3216 > Using board 'nodemcuv2' from platform in folder: C:\Users\user\AppData\Local\Arduino15\packages\esp8266\hardware\esp8266\3.1.2 > > ``` Please tell us which IDE version this output came from. Please also post the output from compiling with the other IDE version. ---
**Author:** ![Sachig](https://avatars.discourse-cdn.com/v4/letter/s/3be4f8/32.png) [@Sachig](https://forum.arduino.cc/u/Sachig)\ **Post date:** [February 19, 2024, 4:48pm UTC](https://forum.arduino.cc/t/arduino-ide-2-3-1-crashes-esp8266/1225801/11 "2024-02-19T16:48:07Z")
This is from the "problematic" IDE 2.3.1 Shortly I will post the output from IDE 2.2.1, different computer, takes some juggling ---
**Author:** ![Sachig](https://avatars.discourse-cdn.com/v4/letter/s/3be4f8/32.png) [@Sachig](https://forum.arduino.cc/u/Sachig)\ **Post date:** [February 19, 2024, 4:53pm UTC](https://forum.arduino.cc/t/arduino-ide-2-3-1-crashes-esp8266/1225801/12 "2024-02-19T16:53:39Z")
IDE 2.2.1 output [IDE 2-2-1 output.txt](https://forum.arduino.cc/uploads/short-url/3fVUjurPQyndDuPUC1cHpDzsUBY.txt) (125.8 KB) ---
**Author:** ![ptillisch](https://avatars.discourse-cdn.com/v4/letter/p/ad7895/32.png) [@ptillisch](https://forum.arduino.cc/u/ptillisch)\ **Post date:** [February 19, 2024, 5:18pm UTC](https://forum.arduino.cc/t/arduino-ide-2-3-1-crashes-esp8266/1225801/13 "2024-02-19T17:18:46Z")
I compared the two and found a possibly significant difference: From the 2.2.1 output: ```plaintext FQBN: esp8266:esp8266:nodemcuv2:mmu=4816H ``` From the 2.3.1 output: ```plaintext FQBN: esp8266:esp8266:nodemcuv2:mmu=3216 ``` It is a bit cryptic, but what this means is that you have "**16KB cache + 48KB IRAM and 2nd Heap (shared)**" selected from the **Tools \> MMU** menu in Arduino IDE 2.2.1 and "**16KB cache + 32KB IRAM + 16KB 2nd Heap (not shared)**" selected from the menu in Arduino IDE 2.3.1. Select **Tools \> MMU \> 16KB cache + 48KB IRAM and 2nd Heap (shared)** from the Arduino IDE 2.3.1 menus, upload the sketch to your ESP8266 board again, and then check whether the crash still occurs. ---
**Author:** ![Sachig](https://avatars.discourse-cdn.com/v4/letter/s/3be4f8/32.png) [@Sachig](https://forum.arduino.cc/u/Sachig)\ **Post date:** [February 19, 2024, 5:28pm UTC](https://forum.arduino.cc/t/arduino-ide-2-3-1-crashes-esp8266/1225801/14 "2024-02-19T17:28:44Z")
Hallelujah! This indeed is the issue. Wow, that was quick! Thank you very much! ---
**Author:** ![ptillisch](https://avatars.discourse-cdn.com/v4/letter/p/ad7895/32.png) [@ptillisch](https://forum.arduino.cc/u/ptillisch)\ **Post date:** [February 19, 2024, 5:44pm UTC](https://forum.arduino.cc/t/arduino-ide-2-3-1-crashes-esp8266/1225801/15 "2024-02-19T17:44:27Z")
You are welcome. I'm glad it is working now. Regards, Per ---
**Author:** ![system](https://dub1.discourse-cdn.com/arduino/user_avatar/forum.arduino.cc/system/32/1140315_2.png) [@system](https://forum.arduino.cc/u/system)\ **Post date:** [August 17, 2024, 5:44pm UTC](https://forum.arduino.cc/t/arduino-ide-2-3-1-crashes-esp8266/1225801/16 "2024-08-17T17:44:40Z")
This topic was automatically closed 180 days after the last reply. New replies are no longer allowed.