Hello forum administrator and to those who are reading this, please help me I have a problem in my arduino robot.
the problem is i cant upload a new sketch to the arduino robot using the arduino IDE, the IDE is stuck in uploading and after that it gives this error.
Programmer Type : butterfly
Description : Atmel AppNote AVR109 Boot Loader
Connecting to programmer: .avrdude: Send: . [1b]
avrdude: Send: S [53]
avrdude: Recv:
avrdude: Recv:
avrdude: Send: V [56]
avrdude: Recv:
avrdude: Send: v [76]
avrdude: Recv:
avrdude: Recv:
avrdude: Send: p [70]
avrdude: Recv:
Found programmer: Id = "<ΓΏ("; type = !
Software Version = E.
avrdude: Send: a [61]
avrdude: Recv:
avrdude: Send: b [62]
avrdude: Recv:
avrdude: error: buffered memory access not supported. Maybe it isn't
a butterfly/AVR109 but a AVR910 device?
I have already uploaded sketches to this robot before but the last program that I upload is from the example sketch from the IDE which is the logo example. after that i was not able to upload new sketch into the Robot. every time I upload its just resets the robot and the RX led blinks not the TX and then nothing happens it goes back to the previous sketch (which is logo) that is why Im asking for your help on how to fix this problem and for me to upload new sketch into the robot. thank you and have a nice day.