Today I will bring you an evaluation of the Intelligent tracking car, it is an interesting work, you will experience a funny process of doing this.
First of all, I prepare necessary tools and components, which help me to do a nice job.
Tools List:
1 x Slotted Screwdriver
1 x Cross Screwdriver
1 x Cross Multimeter
The production process of the Intelligent tracking car is not that hard as you imagine, so I just select the most simple tools, the photo shows, that’s enough for my work.
Second, I prepare modules of the intelligent tracking car, it is the most important component to make the intelligent tracking car.
Modules list:
4 x DC Motor
4 x High Quality Tires
4 x Fixing Device
2 x Perspex Sheet(1002135MM)
1 x L298N
1 x ARDUINO UNO328
1 x ARDUINO Sensor Shield V5.0
3 x Line Module
1 x Battery Box of 18650 Battery
2 x 18650 Battery
1 x Battery Charger of 18650
30 x Dupont Line
1 x Cable USB(1M)
A Number of Mountings
Before I start, I prepare the two components you see in the following picture, the Arduino UNO is very easy to use and you can get it from internet with a low price. I get this board for $10.24 on tinydeal.com.
http://www.tinydeal.com/diy-parts-components-pxnggw-c-597_1314.html.
ARDUINO UNO328 and ARDUINO Sensor Shield V5.0
Line Module
Battery Box of 18650 Battery
DC Motor and High Quality Tires
L298N
All the components, I get them from tinydeal
Then, I will put them together
The back of the ARDUINO Sensor Shield V5.0
ARDUINO Sensor Shield V5.0 and ARDUINO UNO328 assembly
Make the L298N Module connection with Arduino UNO, L298N module in1 in2 in3 in4 connected ARDUINO Sensor Shield V5.0 3 9 10 11.
Line Module connected ARDUINO Sensor Shield V5.0 left:2 middle:4 right:7.
The installation of the 18650 Battery battery box
Make the Battery Box connected with L298N
The installation of line module
The whole car is fixed with screws
The Intelligent tracking car is completed after you Installe four wheels on it.
When I complete the hardware installation and commissioning of the Intelligent tracking car, I should write a program to make the Intelligent tracking car run in accordance with the requirements of the rule.
IDE is easy to use whether you have a programming foundation, I can easily and quickly write a program to control the Intelligent tracking car.
Arduino IDE
The Program of the Intelligent tracking car, The program burned entry arduino UNO,this Intelligent tracking car is already completed.
Installed the battery with the Intelligent tracking car, it can run run as your order.
It’s not a difficult thing to make an intelligent cat, for those people interested in Arduino, they can develop smarter devices like UFO and smart robot! Did you ever know a little about Arduino? I hope this tutorial can arouse your interest on it! Get start on your first Arduino intelligent car now!!