# Arduino Interface with node-red

**URL:** <https://forum.arduino.cc/t/arduino-interface-with-node-red/896113>\
**Category:** Interfacing w/ Software on the Computer\
**Created:** [August 16, 2021, 2:15pm UTC](https://forum.arduino.cc/t/arduino-interface-with-node-red/896113 "2021-08-16T14:15:19Z")\
**Posts on this page:** 1\
**Showing post:** 7

<div class="post-metadata">

**Author:** ![rafael\_m\_ribeiro](https://avatars.discourse-cdn.com/v4/letter/r/ed655f/32.png) [@rafael\_m\_ribeiro](https://forum.arduino.cc/u/rafael_m_ribeiro)\
**Post date:** [August 16, 2021, 3:54pm UTC](https://forum.arduino.cc/t/arduino-interface-with-node-red/896113/7 "2021-08-16T15:54:02Z")

</div>

Ok i have identified the problem. When arduino tries to send 2 signals, non of them are read! I can only receive the coloum or the row, if i try to press "1" (pins 9 and 5) and have both connected on node-red it wont receive payload, as if i only have one of them connected in Node-RED i get the one i have connected!

---

_[View the full topic](https://forum.arduino.cc/t/arduino-interface-with-node-red/896113)._
