Here we are
Arduino: 1.8.5 (Mac OS X), Board: "Arduino Mini, ATmega328P"
Sketch uses 2134 bytes (7%) of program storage space. Maximum is 28672 bytes.
Global variables use 199 bytes (9%) of dynamic memory, leaving 1849 bytes for local variables. Maximum is 2048 bytes.
/private/var/folders/dp/6r7wzlzd3f9br_cr1g03fq380000gn/T/AppTranslocation/79E29C31-BE6A-4452-9AD4-2474642D00B2/d/Arduino.app/Contents/Java/hardware/tools/avr/bin/avrdude -C/private/var/folders/dp/6r7wzlzd3f9br_cr1g03fq380000gn/T/AppTranslocation/79E29C31-BE6A-4452-9AD4-2474642D00B2/d/Arduino.app/Contents/Java/hardware/tools/avr/etc/avrdude.conf -v -patmega328p -carduino -P/dev/cu.wchusbserialfd120 -b115200 -D -Uflash:w:/var/folders/dp/6r7wzlzd3f9br_cr1g03fq380000gn/T/arduino_build_724668/RFID_KEY_micro.ino.hex:i
avrdude: Version 6.3, compiled on Jan 17 2017 at 12:01:35
Copyright (c) 2000-2005 Brian Dean, http://www.bdmicro.com/
Copyright (c) 2007-2014 Joerg Wunsch
System wide configuration file is "/private/var/folders/dp/6r7wzlzd3f9br_cr1g03fq380000gn/T/AppTranslocation/79E29C31-BE6A-4452-9AD4-2474642D00B2/d/Arduino.app/Contents/Java/hardware/tools/avr/etc/avrdude.conf"
User configuration file is "/Users/jamesvandenbosch/.avrduderc"
User configuration file does not exist or is not a regular file, skipping
Using Port : /dev/cu.wchusbserialfd120
Using Programmer : arduino
Overriding Baud Rate : 115200
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 1 of 10: not in sync: resp=0x00
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 2 of 10: not in sync: resp=0x00
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 3 of 10: not in sync: resp=0x00
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 4 of 10: not in sync: resp=0x00
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 5 of 10: not in sync: resp=0x00
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 6 of 10: not in sync: resp=0x00
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 7 of 10: not in sync: resp=0x00
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 8 of 10: not in sync: resp=0x00
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 9 of 10: not in sync: resp=0x00
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 10 of 10: not in sync: resp=0x00
avrdude done. Thank you.
Problem uploading to board. See http://www.arduino.cc/en/Guide/Troubleshooting#upload for suggestions.
This report would have more information with
"Show verbose output during compilation"
option enabled in File -> Preferences.