Arduino Nano 33 BLE Doesn't power up

Development Tools IDE 1.x
1

Hello everyone ! I'm brand new in the Arduino community even if I have already worked on Arduino Boards at school.

I recently buy an Arduino 33 BLE and I just received it, BUT...

I tried the blink Program and suddenly the board shut off.

I tried to unplug and re plug the board but none led is lighting up....

I don't understand why, can you help me ?

Thanks by advance

2

Can you still upload sketches to your Nano 33 BLE?

3

I can't do anything, the board doesn't appeared on any port

4

Try this:

  • Connect the USB cable of your Nano 33 BLE to your computer.
  • Press and release the "RST" button on the Nano 33 BLE twice quickly.

Do you now see the "L" LED pulsing?

5

Sadly it doesn't pulse

6

Make sure your USB cable is fully inserted into the jack on the Nano 33 BLE and your computer.

Try a different USB cable. The one you're using might be damaged.

If you have a multimeter or an LED, connect it between the "3.3 V" and "GND" pins to see if there is voltage output on the 3.3 V pin.

7

I tried to connect a new led, but nothing...