I have a simple question. My Arduino Nano 33 BLE is build in a case. So, when it is powered on i cannot see it. I like to have an external led that indicates that the board is powered ON. Wich voltagepin is the best to use?. I have read that when 5v pin is needed then you have to bridge 2 pads to…

[image] marcnh33: I like to use the 3.3v output for the external led. But, is that possible? Do i have to connect the led directly? Or do i have to add a resistor in line between the 3.3v and the led ?? Yes, its possible. No. Yes, 330 ohm would work real good.

Arduino Nano 33 BLE External power led indicator

Official Hardware Nano Family Nano 33 BLE

marcnh33 September 21, 2021, 12:04pm 5

Thank you very much!

1 Like

Topic		Replies	Views
Can I power the Nano 33 BLE via the 3v3 pin with 3.3V? Nano 33 BLE	4	4241	May 7, 2021
power NANO 33 BLE sense with 3.3V Nano 33 BLE Sense	6	7371	May 7, 2021
Nano 33 BLE won’t power via battery Nano 33 BLE	4	2408	May 7, 2021
External Powering - Arduino Nano 33 BLE Sense Nano 33 BLE Sense	3	7966	May 7, 2021
Arduino nano 3.0 serial communication external power 3rd Party Boards	4	3190	May 6, 2021

Arduino Nano 33 BLE External power led indicator

Related topics