Arduino Nano 33 BLE sense not recognised

Official Hardware Nano Family Nano 33 BLE
1

Hi,

I just started playing with the Arduino Nano 33 BLE sense.

After one of the SW uploads, the Arduino could not be recognized anymore (not listed as a serial device).

Any advice here?
Is there a factory reset procedure of any kind?

Thanks in advance.

2

Solved.

Looking around at the forum, I pressed the reset button twice running the bootloader. Now my Mac detected the Arduino once again.

3

Also for the information :slight_smile:

NOTE: If the board does not enter the upload mode, please do a double press on the reset button before the upload process is initiated; the orange LED should slowly fade in and out to show that the board is waiting for the upload.