Arduino Pin Layout with WL 125 RFID reader

Hey everyone,

I connected a rfid reader to my arduino like described in this thread: WL125 RFID Pet feeder help - #22 by markmonkey1

While soldering the pins I figured out, that the Wiegand26 protocol only seems to work with pins 2 and 3. At least I could not read any RFID tags while using pins 2 and 5.

Obviously, I simply changed the pins and use 2 and 3 for now, but nevertheless, I am curious why there is a difference when it comes to using the Arduino pins.
I am aware that the Arduino has analog pins in order to do an analogWrite(), but that should not matter for the RFID reader, moreover pin 5 is also capable of analog writing just as pin 3. (I am using an Arduino UNO)

So why does it make a difference which pins I am using?

Thank you very much in advance.

The library uses external interrupts for the communication. An arduino Uno only supports external interrupts on pins 2 and 3 (int 0, int 1)

Thank you very much,
I am gonna read up on this.