Arduino portenta h7 error

Hello do anyone knows how to resolve this problem , im trying to upload my code to an arduino portenta h7 from arduino ide 1.8.15 , but i cant find any solution

Arduino: 1.8.15 (Windows 10), Board: "Arduino Portenta H7 (M7 core)"

Sketch uses 293312 bytes (37%) of program storage space. Maximum is 786432 bytes.

Global variables use 76232 bytes (14%) of dynamic memory, leaving 447392 bytes for local variables. Maximum is 523624 bytes.

dfu-util 0.10-dev

Copyright 2005-2009 Weston Schmidt, Harald Welte and OpenMoko Inc.

Copyright 2010-2021 Tormod Volden and Stefan Schmidt

This program is Free Software and has ABSOLUTELY NO WARRANTY

Please report bugs to http://sourceforge.net/p/dfu-util/tickets/

Warning: Invalid DFU suffix signature

A valid DFU suffix will be required in a future dfu-util release

Cannot open DFU device 2341:035b found on devnum 1 (LIBUSB_ERROR_NOT_FOUND)

No DFU capable USB device available

the selected serial port No DFU capable USB device available

does not exist or your board is not connected

@pichy, your topic was moved to a more suitable section of the forum.

Try double push button on board. LED should then pulsate, now try upload again.

This topic was automatically closed 120 days after the last reply. New replies are no longer allowed.