# arduino pushbutton interfacing (VB.NET)

**URL:** <https://forum.arduino.cc/t/arduino-pushbutton-interfacing-vb-net/262113>\
**Category:** Interfacing w/ Software on the Computer\
**Created:** [October 8, 2014, 5:08pm UTC](https://forum.arduino.cc/t/arduino-pushbutton-interfacing-vb-net/262113 "2014-10-08T17:08:36Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![system](https://dub1.discourse-cdn.com/arduino/user_avatar/forum.arduino.cc/system/32/1140315_2.png) [@system](https://forum.arduino.cc/u/system)\
**Post date:** [October 8, 2014, 5:08pm UTC](https://forum.arduino.cc/t/arduino-pushbutton-interfacing-vb-net/262113/1 "2014-10-08T17:08:36Z")

</div>

Hello guys,

I am barely new to both arduino and vb.net that's why I am here to beg for help and learn from you $)  
So here's my project a pushbutton but with a vb.net interface 🙂  
I want to happen is when the button is pressed it will communicate to vb.net and the vb.net will show a output(picture for example).  
Here's the arduino code I will use from example code:

```plaintext
/*
  Button
 
 Turns on and off a light emitting diode(LED) connected to digital  
 pin 13, when pressing a pushbutton attached to pin 2. 
 
 
 The circuit:
 * LED attached from pin 13 to ground 
 * pushbutton attached to pin 2 from +5V
 * 10K resistor attached to pin 2 from ground
 
 * Note: on most Arduinos there is already an LED on the board
 attached to pin 13.
 
 
 created 2005
 by DojoDave <http://www.0j0.org>
 modified 30 Aug 2011
 by Tom Igoe
 
 This example code is in the public domain.
 
 http://www.arduino.cc/en/Tutorial/Button
 */

// constants won't change. They're used here to 
// set pin numbers:
const int buttonPin = 2;    // the number of the pushbutton pin
const int ledPin =  13;      // the number of the LED pin

// variables will change:
int buttonState = 0;        // variable for reading the pushbutton status

void setup() {
  // initialize the LED pin as an output:
  pinMode(ledPin, OUTPUT);      
  // initialize the pushbutton pin as an input:
  pinMode(buttonPin, INPUT);     
}

void loop(){
  // read the state of the pushbutton value:
  buttonState = digitalRead(buttonPin);

  // check if the pushbutton is pressed.
  // if it is, the buttonState is HIGH:
  if (buttonState == HIGH) {     
    // turn LED on:    
    digitalWrite(ledPin, HIGH);  
  } 
  else {
    // turn LED off:
    digitalWrite(ledPin, LOW); 
  }
}

```

On my VB.NET(I used the drag & drop serialPort component) I dont have any idea on what code will I use to make it show its output.  
I searched the google about this button project but it seems no one can give me the idea about the vb.net code ☹  
I hope you spare some of your precious time and knowledge on me so that I could have a knowledge for my future projects THANK YOU \<3

---

<div class="post-metadata">

**Author:** ![Robin2](https://dub1.discourse-cdn.com/arduino/user_avatar/forum.arduino.cc/robin2/32/216045_2.png) [@Robin2](https://forum.arduino.cc/u/Robin2)\
**Post date:** [October 8, 2014, 6:43pm UTC](https://forum.arduino.cc/t/arduino-pushbutton-interfacing-vb-net/262113/2 "2014-10-08T18:43:04Z")

</div>

I use Linux so I can't advise about VB.net but what you want is certainly doable.

This question should really be in the section about interfacing and I will ask the Moderator to move it.

I have a [Python demo](http://forum.arduino.cc/index.php?topic=271097) of something similar in that section.

...R

---

<div class="post-metadata">

**Author:** ![ieee488](https://avatars.discourse-cdn.com/v4/letter/i/d2c977/32.png) [@ieee488](https://forum.arduino.cc/u/ieee488)\
**Post date:** [October 8, 2014, 8:19pm UTC](https://forum.arduino.cc/t/arduino-pushbutton-interfacing-vb-net/262113/3 "2014-10-08T20:19:14Z")

</div>

Your question is really 2-fold.  
Code for the Arduino which will respond to the serial port.  
VB.NET code to command the Arduino.

I found the Arduino code found here [Arduino, C#, and Serial Interface - CodeProject](http://www.codeproject.com/Articles/473828/Arduino-Csharp-and-Serial-Interface)  
to work just fine.

I simplified the C# but haven't had a chance to convert it to VB.NET

---

<div class="post-metadata">

**Author:** ![system](https://dub1.discourse-cdn.com/arduino/user_avatar/forum.arduino.cc/system/32/1140315_2.png) [@system](https://forum.arduino.cc/u/system)\
**Post date:** [May 6, 2021, 11:29am UTC](https://forum.arduino.cc/t/arduino-pushbutton-interfacing-vb-net/262113/4 "2021-05-06T11:29:51Z")

</div>

Closed on May 6, 2021, 11:29am UTC


