My Arduino Uno R4 WiFi now connects to the WiFi network.
I see the following on the Serial Monitor:
13:46:06.491 -> CONNECTION STATUS: connecting to WiFi
13:46:06.491 -> WiFi.status(): 0
13:46:06.532 -> Current WiFi Firmware: 0.6.0
13:46:06.615 -> Connected to "moto e(13)"
13:46:07.017 -> CONNECTION STATUS: connecting to Arduino Cloud
13:46:10.835 -> ***** Arduino IoT Cloud - 2.7.0 *****
13:46:10.835 -> Device ID: 509e44e0-cdda-4b63-b295-407e015355c6
13:46:10.835 -> MQTT Broker: iot.arduino.cc:8885
13:46:10.876 -> Network Configurator: 0.4.1
13:46:13.999 -> Connected to Arduino IoT Cloud
13:46:13.999 -> Thing ID: 07032486-8571-433b-a917-8d085a2edf52
The Uno is shown as being online:
I've now got the following dashboard:
I can manually set the latitude and longitude, and the marker goes to that location after approximately 30s.
I can manually adjust the date ant time on the scheduler, but can't find out how to change the 'America/New_York' to anything else.
However I don't see anything weather related.
The Uno R4 WiFi LED matrix is off, the modulino pixels are all off, the modulino knob has no effect.
What do I need to do to get some weather information?
Are there instructions on how to use the 'Weather Report' Thing?