Arduino robot upload problem

Projects Programming
1

Hey there
(Sorry for my bad english but I'm belgian)

Problem: I use a Arduino Robot (on Win 7 Ultimate with Arduino 1.0.6 ) and the first times I upload a sketch there were no problems but no when I upload a sketch, while uploading it gives me this error message: "Found programmer: Id = "Bë+"; type = avrdude: error: buffered memory access not supported. Maybe it isn't a butterfly/AVR109 but a AVR910 device"?

I used VirtualBox for install WinXP on it and use Arduino on this OS but there I got this problem: "processing.app.debug.RunnerException: Couldn't find a Leonardo on the selected Port".
Please help it's really important because I need it for school...

2

Please help it's really important because I need it for school...

Then, perhaps you should be able to recognize that this is not a programming problem. Perhaps you should have posted this in Bar Sport.

3

Yesterday I had exactly the same problem with my Leonardo. Google this "An experience method to fix Leonardo Serial port"
In case it doesn't help, write again we will try to unlock :wink:

4

Ok thanks for the answer when I start the device manager there is my Arduino Robot at COM1 then I press the Reset button it disappears and after a few seconds it appears again, that's ok but on this website (http://www.dfrobot.com/forum/index.php?topic=18674.0) someone said it disappears again, what did he mean ? :slight_smile:

5

If it appears in Device manager then everything is right.
Bootloader is still there :wink:
As said there open Blink LED program -> compile (but do NOT send) -> connect Arduino -> press RESET -> quickly click upload sketch
In my case after second try I managed to unlock my Arduino

6

Sorry but it still won't work when I press Reset and quickly click upload sketch then at the End from the upload the Arduino disconnect from pc and connect again and the Sketch wasn't uploaded yet :frowning:

7

Please check this topic Problem Uploading: Maybe it isn't a butterfly/AVR109 but a AVR910 device? - Installation & Troubleshooting - Arduino Forum if any advice works for You

8

It shows me that I'm not the only one with this problem, perhaps it's a Driver problem and I hope it will be fixed as soon as possible, anyway thankyou for your help Pole92 :wink:

9

Hey there, I got it finally :smiley: I found it in the "RobotQuickStartGuide" in Troubleshooting, when you press the upload button in the Arduino IDE, and then press the Reset button on the Robot's control board twice in quick sequence. For the first time it doesn't work but after a few times it works finally :smiley: :smiley: and then I got a white screen than you need just upload a new sketch like Blink or Hello_User or whatever and it works great :wink: