Hi,
My arduino was working fine and was uploading fine until last night. Now, it gets stuck at 'Uploading' and if it gets past that, it spits out a message saying 'problem could not upload to board.'
I tried to upload an example sketch and same thing happens. Arduino UNO is selected as the device and COM9 is also selected.
Someone please help!!
Here is the exact error message :
Build options changed, rebuilding all
Sketch uses 1122 bytes (3%) of program storage space. Maximum is 32256 bytes.
Global variables use 19 bytes (0%) of dynamic memory, leaving 2029 bytes for local variables. Maximum is 2048 bytes.
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 1 of 10: not in sync: resp=0xaa
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 2 of 10: not in sync: resp=0xaa
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 3 of 10: not in sync: resp=0xaa
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 4 of 10: not in sync: resp=0xaa
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 5 of 10: not in sync: resp=0xaa
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 6 of 10: not in sync: resp=0xaa
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 7 of 10: not in sync: resp=0xaa
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 8 of 10: not in sync: resp=0xaa
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 9 of 10: not in sync: resp=0xaa
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 10 of 10: not in sync: resp=0xaa
Problem uploading to board. See http://www.arduino.cc/en/Guide/Troubleshooting#upload for suggestions.
Invalid library found in C:\Program Files (x86)\Arduino\libraries\IRLib2-master: C:\Program Files (x86)\Arduino\libraries\IRLib2-master
Invalid library found in C:\Program Files (x86)\Arduino\libraries\IRLib2-master: C:\Program Files (x86)\Arduino\libraries\IRLib2-master