Arduino UNO 4 wifi Blocked

Official Hardware Classic UNO R4 WiFi
1

Hi,
It is impossible to communicate with Arduino Uno 4 Wi-Fi. The USB port to send the scetch on the ARDUINO IDE is not available. How to do a RESET or something else?.

2

If the Arduino Uno WiFi is not recognized by your computer, you may need to reinstall the drivers.

3

I moved your topic to an appropriate forum category.
In the future, please take some time to pick the forum category that best suits the subject of your topic. There is an “About the _____ category” topic at the top of each category that explains its purpose.
This is an important part of responsible forum usage, as explained in the “How to get the best out of this forum” guide. The guide contains a lot of other useful information. Please read it.
Thanks in advance for your cooperation.

4

Hi @filipegameiro. Please try this experiment and then report back with the results:

  1. Connect your Arduino board to your computer with the USB cable.
  2. Press and release the reset button on your Arduino board quickly twice.
  3. If it is already open, close the Tools > Port menu in Arduino IDE.
  4. Open the Tools > Port menu in Arduino IDE.

Now please reply here on the forum thread with the answers to the following questions:

  • Do you now see the LED on the board pulsing?
  • Do you see a port for the board in the Tools > Port menu?