Hello, I'm having some troubles sending data from my SAMD21g18a master to Arduino uno (slave). This is my master code: #include "sam.h" #include "t/Core.h" #define BUFFER_SIZE 32 #define SPI_CLK_FREQ 8000000 #define SPI_BAUD 50000 void init_SPI_tutorial(){ while(SERCOM1->SPI.SYNCBUSY.bit.ENAB…

First the hardware: a SAMD21 runs on 3.3V while the UNO runs on 5V. Your wiring might work (given very short connections) for SCKL, CS and MOSI but the MISO connection probably damages the SAMD21. You should use level converters for all these signals! Additionally the SPI frequency of 8MHz is too …

Arduino Uno as SPI slave

Projects Networking, Protocols, and Devices

arduinomegalul October 12, 2021, 7:44am 3

Thanks, lowering the frequency did the trick. And thanks for letting me know about the voltage difference before I broke something.

Topic		Replies	Views
Two arduino modules communicate via SPI Networking, Protocols, and Devices	26	22905	May 6, 2021
SPI between 2 Arduinos one as master and one as slave Programming	28	50207	May 5, 2021
Arduino as SPI slave Networking, Protocols, and Devices	43	76650	May 6, 2021
Setting up the second SPI port on the Arduino Uno Networking, Protocols, and Devices	19	15858	May 6, 2021
Arduino Zero Sercom1 SPI Slave Zero	30	20720	May 6, 2021

Arduino Uno as SPI slave

Related topics