I have an Arduino r3 mega328p, selected from Tools > Board "Arduino Uno", selected the only port i have Com1. I made a test with a led, the board works. When i try to upload a new programm it taks a while and i get this error: Arduino: 1.8.16 (Windows 10), Board: "Arduino Uno" Sketch uses 1050 by…

PCI Lookup says it's an HL-340 USB-Serial adapter. A quick google for HL340 driver brings up a lot of hits. Install the driver and you should be good to go.

Arduino Uno can't upload program

Development Tools IDE 1.x

markd833 September 20, 2021, 10:29am 4

Ok, if you open up the Windows Device Manager and expand the COM port section, does COM1 disappear when you unplug your UNO and then reappear when you plug it back in?

Topic		Replies	Views
Issue with Arduino Uno and uploading to it! CH340 IDE 1.x	6	3860	May 5, 2021
Having Trouble Uploading to Arduino UNO IDE 1.x	5	1030	May 5, 2021
Can't upload my projct to Arduino Uno IDE 1.x	8	1339	May 5, 2021
uploading problem IDE 1.x	4	1748	May 5, 2021
Arduino Uno (clone) error: "Programmer is not responding" IDE 1.x	1	955	May 5, 2021

Arduino Uno can't upload program

Related topics