Hi all,
I'm trying to find the Digikey part numbers for the 1x6 and 1x8 headers. Thank you in advance.
Colin
Search for samsung parts.
Do you need the long pins or short pins?
I think www.pololu.com carries them as well.
There is nothing particularly special about the headers on the arduino board, so no place will call them "Arduino headers."
You might want to start by looking here:
http://www.ladyada.net/wiki/partfinder/header
May be thinking of the special offset header?
http://www.arduino.cc/cgi-bin/yabb2/YaBB.pl?num=1247778571
solidmotion:
...Digikey part numbers for the 1x6 and 1x8 headers. ...
The following are shown as currently in stock:
A32907-ND
A32921-ND
Regards,
Dave
Footnote:
For future reference:
The search path in Digi-Key was Connectors, Interconnects -> Rectangular - Headers, Receptacles, Female Sockets ->
Then you are presented with a table with lots of possibilities.
Select the following:
Connector type: Rececptacle
Contact type: Female Socket
Number of positions: Click 6, hold the "Ctrl" key down and click 8
Pitch: 0.100" (2.54 mm)
Number of rows: 1
Mounting type: Through Hole
Termination: Solder
Check the box for "In stock"
And, finally, click "Apply Filters"
Those aren't the part numbers that Adafruit provides.
For whatever reason, digikey's prices for this sort of connector are VERY high. You can buy a full set of stacking connectors from Adafruit for the price of ONE of the 8-pin connectors that Dave found.