Arduino Uno on single side board????!!!!!!!!!!!!!!!!!!!!!!!

Other Hardware General Electronics
1

hello every :slight_smile: body :
well in my country there is no arduino, and if you want to get it from outside it will be charged higher three or four times , but the could thing that i could found all the hardware component of arduino Uno , so i need the eagle schematic for this arduino uno on Single Side board because i can print only on single side board , so please help , XD

2

Yes you can do it, you can even use strip board.

3

thank you any way .
but i need to print it on PCB on single side , so i need the schematic for arduino uno rev 3 (eagle prefered ) on Single sidey

4

That last link gave you the schematic.
You can't have a single sided schematic there is no such thing. It only becomes single sided when you do the layout.
There is no need to use a PCB you can use strip board.

There is some information here:-

5

I'm with GM on this one: there is no such thing as a single sided schematic. A layout can be single sided, dual sided, or even multiple layers, but a schematic is just that, a schematic. So what you're asking for is a single sided layout of all the traces and components. You can grab the eagle files for any of the Arduino boards and re-run the traces yourself on one side.

6

SORRY EVERY BODY for bad english :disappointed_relieved: :~
i meant single side layout for arduino uno rev 3

7

gogocode602:
SORRY EVERY BODY for bad english :disappointed_relieved: :~
i meant single side layout for arduino uno rev 3

That includes surface mounted components you know.
Just go to the Uno page
http://arduino.cc/en/Main/arduinoBoardUno
There you will see a link to the schematic

Schematic & Reference Design

EAGLE files: arduino-uno-Rev3-reference-design.zip (NOTE: works with Eagle 6.0 and newer)

Schematic: arduino-uno-Rev3-schematic.pdf

Take the schematic and lay it out as a single sided design.