Arduino UNO R3 "This device cannot start (Code 10)" at hardware manager

This device cannot start. (Code 10) is so disturbing. At first it was all fine. Then the port was not coming in arduino ide. I went to device drivers and saw this as the problem. Please help me. board=arduino uno r3

Yes it is a driver issue.

How you get past that can depend on the board.

If it is a clone you may need ADDITIONAL drivers eg CH340/341 or CP2102.

If you already have the correct drivers then you may need to re-install them with ADMINISTRATOR privileges OR turn OFF driver enforcement OR both.

I would like you to also read THIS please so that you know how to add details for future posts.

Bob.