Arduino Uno + SeeedStudio Touch Shield + SeeedStudio SD Card Shield

Other Hardware Storage
1

Hi all. I recently bought an arduino uno, and am having trouble displaying an image onto my display from the SD card. I went through the provided SD card example, and I am able to read from the card fine, when its the only thing plugged in, and I am able to display circles and rectangles fine on the display, again, when its the ONLY thing plugged in. Now when i combine the two, they stack one on top of another, the SD card will read, however, the screen isn't recognized and no commands are sent to the screen at all. Is there a way around this? or am i doing something stupid? Please do include libraries that you have that work, so that we are on the same page of libraries and such.

IMAGES (wouldn't upload right, sorry for the inconvenience)

Does anyone have maybe a link or another post elsewhere that can lead me to the right direction?

2

If I'vent been mistaken you have the 1st version of touch?
http://www.seeedstudio.com/wiki/TFT_Touch_Shield
the same question about SDcard shield: 3d or 4th??

take a look at the dependencies of them in case of PINs.
It's obvious that they mustn't intersect)

W8ing for your detailes)

3

It is indeed a v3 SD Card reader and a v1 Touch shield!

4

Do you think there can be a way to wire this up to an Arduino Micro rather than an Uno??

5

To work properly , as I've said before, PINs used must not intersect.
Here on the attached picture u can see intersecting of D10-D13.
I guess that changing the board will not have the leading role in it. I'd recommend u to connect it to arduino not as making a sandwich but using separate dev board (smth like proto shield)

sorry for my bad English(

FeelDifference.jpg
FeelDifference.jpg1280×800 193 KB